Epson SureColor F2270 Standard Edition Users Guide

Epson SureColor F2270 Standard Edition Manual

Get Epson SureColor F2270 Standard Edition PDF manuals and user guides View all Epson SureColor F2270 Standard Edition manuals
Add to My Manuals
Save this manual to your list of manuals

Epson SureColor F2270 Standard Edition manual content summary:

  • Epson SureColor F2270 Standard Edition | Users Guide - Page 1
    Epson® SureColor® F2270 User's Guide
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 2
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 3
    Contents SureColor F2270 User's Guide ...9 Introduction to Your Printer...10 Printer Features ...10 Optional Equipment and Replacement Parts 11 Notations Used in the Documentation 12 Printer Part Locations...13 Printer Parts - Front/Top ...14 Printer Parts - Inside ...15 Printer Parts - Back...16
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 4
    Guidelines 47 Printable Area for Each Platen ...48 Preparing Your Printer...51 Attaching the Grip Pad to the Platen 52 Removing USB Memory Device 102 Maintenance...104 Maintenance Guidelines...104 Maintenance Safety Instructions ...105 Print Head Maintenance...106 Performing a Nozzle Check ...106
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 5
    ...154 Basic Settings Menu...154 Printer Settings Menu...156 Maintenance Settings...156 Network Settings Menu ...158 Media Settings ...158 Maintenance Menu...160 Printer Status Menu...161 Solving Problems ...162 Product Status Messages ...162 Solving Printer Problems...165 Printer Does Not Turn On
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 6
    Device 170 Red Light Shines Inside the Printer 170 Forgot the Administrator Password 171 Solving Print Quality Problems ...171 Nozzle Check Pattern Prints Incorrectly 171 184 Mac System Requirements ...185 Printer Specifications ...186 Supported Media Specifications...186 Interface Specifications
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 7
    ...193 List of Safety Symbols on the Product 193 General Product Safety Instructions 194 LCD Screen Safety Instructions 198 Ink Pack Safety Instructions ...198 FCC Compliance Statement...199 Binding Arbitration and Class Waiver 200 Trademarks ...203 Copyright Notice...203 A Note Concerning
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 8
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 9
    SureColor F2270 User's Guide Welcome to the SureColor F2270 User's Guide. For a printable PDF copy of this guide, click here. 9
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 10
    Refer to these sections to learn more about your printer and this manual. Printer Features Notations Used in the Documentation Printer Part Locations Printer Features The Epson SureColor F2270 printer includes these special features: High productivity • High-speed printing using high-density 400
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 11
    accessories listed below, 1-year, 2-year, and 4-year extended service plans are available. Latin America: You can purchase genuine Epson ink liter) Polyester pre-treatment solution (18 liter) Funnel Funnel filter Printer maintenance kit Print head cleaning kit Waste ink bottle Large garment platen
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 12
    C13S210075 C13S210076 C13S210077 C13S210118 C13S210119 C13S210120 C12C934151 C12C891201 C12C891211 C12C891221 T54K100 T54K200 T54K300 T54K400 T54KA00 T54KB00 Parent topic: Printer Features Notations Used in the Documentation Follow the guidelines in these notations as you read your documentation
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 13
    contain additional printing information. Parent topic: Introduction to Your Printer Printer Part Locations Check the printer part illustrations to learn about the parts on your printer. Printer Parts - Front/Top Printer Parts - Inside Printer Parts - Back Control Panel Parent topic: Introduction to
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 14
    Printer Parts - Front/Top 1 Printer cover 2 Ink covers (left and right) 3 Platen 4 Moveable base 5 Hooks (to hang platen frame) 6 Platen gap lever 14
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 15
    7 start button 8 pause button 9 moveable base button 10 External USB port 11 Ink tray 12 Control panel Parent topic: Printer Part Locations Printer Parts - Inside 15
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 16
    1 Capping station 2 Flushing pad 3 Sensor covers (left and right) 4 Print head 5 Wiper unit 6 Suction cap 7 Encoder strip (carriage scale) Parent topic: Printer Part Locations Printer Parts - Back 16
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 17
    1 AC inlet 2 Rear cover 3 Waste ink outlets 4 Waste ink tubes 5 Waste ink bottle holder 6 Waste ink bottle 7 USB port 8 LAN (Ethernet) port 9 Data light 10 Status light Parent topic: Printer Part Locations Control Panel 1 home icon 2 power button 17
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 18
    3 Error alert light; check the control panel for error details when lit 4 LCD touchscreen LCD Screen Note: When a print job has been sent to the printer, you can select the toggle between the job preview screen and the Home screen. screen switching icon to 1 Access menu items 2 Displays the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 19
    to check the head cleaning set model number. 8 Periodic Cleaning setting status 9 Time before next automatic cleaning 10 Platen Gap setting status 11 Printer status; select to see notifications 12 Displays the Maintenance menu You can check and clean the print head nozzles, replace consumables, and
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 20
    14 Network status icons : No Ethernet connection : Ethernet connection established : Ethernet connection disabled 15 Turns the internal light on or off; turn on to check print in progress Parent topic: Printer Part Locations 20
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 21
    is not performed. • Do not move the movable base or the platen manually. Otherwise, a malfunction may occur. • To keep the print head in optimum operating condition, maintenance is performed when the printer is turned on. If the printer is turned on and off frequently, more ink is consumed in each
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 22
    impossible to clear clogging in the print head. See the link below for more information. • We recommend that you turn on the printer at least once a week if the printer is not used for a long time without performing the prolonged storage operation. If you do not print for a long time, the print
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 23
    Follow these guidelines as you handle the ink and cleaning packs: • Extra ink is required to charge the print head nozzles the first time the printer is used. Be sure to have replacement ink packs ready. • After the ink charging process has begun, do not open covers, press buttons, or do
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 24
    store ink packs standing upright, shaking the ink packs may not sufficiently clear the sedimentation. • If white ink packs are loaded in the printer and the printer will not be used for more than two weeks, use an optional cleaning ink pack and perform long-term storage maintenance. Otherwise, it
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 25
    yellow. Print soon after applying the pre-treatment solution and wash in water. Avoid direct sunlight if you store the T-shirt without printing. Parent topic: Printer Usage Guidelines Related topics Pre-treating a T-shirt 25
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 26
    coagulation before use. If you do not filter out the coagulation before using the pre-treatment solution, the print results will be uneven. Parent topic: Printer Usage Guidelines Related tasks Agitating the Polyester Pre-treatment Solution Filtering the Cotton Pre-treatment Solution 26
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 27
    . 3. Creating and Sending Your Garment Design Create the data you want to print and use the Garment Creator 2 software and send it to the printer. 4. Pre-treating the T-shirt When printing on polyester or with White ink on cotton media, apply pre-treatment solution to the Tshirt before printing
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 28
    the T-shirt Fix the ink to the T-shirt. Parent topic: Basic Printing Related references Required Equipment Related tasks Preparing Your Printer Starting a Print Job Removing a Printed T-shirt Related topics Pre-treating a T-shirt Loading a T-shirt Determining the Height of the Platen Creating
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 29
    ) A heat tunnel is used to fix the ink after printing. A heat tunnel is not necessary if you have a heat press. Grip pad tool (included with printer) The grip pad tool is used to remove slack and creases when loading a T-shirt on a platen with a grip pad. Heat-resistant release sheet (commercially
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 30
    printing with White ink on a cotton T-shirt, or printing on a polyester T-shirt, pre-treatment solution must be applied to the T-shirt. Follow the instructions in these sections to prepare your T-shirt for printing. Note: When printing with color ink on a cotton T-shirt, we recommend that you do not
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 31
    to observe this precaution could result in bloodshot eyes or mild inflammation. If problems persist, consult a physician. • If pre-treatment solution gets in your mouth to the print head, it could cause the printer to malfunction and print quality to decline. Make sure that solution does not stick to
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 32
    • Do not put waste pre-treatment solution in the waste ink bottle as it will solidify if mixed with waste ink. Caution: Pre-treatment solution is classified as industrial waste and must be disposed of by an industrial waste disposal company according to local laws and regulations. When handing over
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 33
    Note: Make sure you pull the cap section out of the hole in the cardboard. If the cap is opened without being pulled out, the pre-treatment solution may spill out. 3. Remove the cap. 4. Remove the tap from the bag and turn the tap's handle section until the hole is visible as shown. Note: If you
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 34
    5. Attach the tap. 6. Remove the cap from the end of the tap and turn the lever until the hole is facing down. 7. To pour the solution, tilt the cardboard box and pour the pre-treatment solution into the desired container. Note: Do not pour pre-treatment solution into the waste ink bottle as it
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 35
    Related references Where to Get Help (U.S. and Canada) Where to Get Help (Latin America) Agitating the Polyester Pre-treatment Solution Follow these steps to stir the polyester pre-treatment solution before opening. If you use it without stirring, the effects of pre-treatment may not be sufficient.
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 36
    2. Turn the container to the right five times. Turn the container at a speed of about one turn every two seconds. 3. Turn the container to the left five times, and at the same speed. 4. Turn the container back to the right five times, and at the same speed. 36
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 37
    5. Turn the box up so that the section where the top comes out is at the top. Parent topic: Pre-treating a T-shirt Related references Handling Pre-treatment Solution Filtering the Cotton Pre-treatment Solution Coagulation may develop in the cotton pre-treatment solution during storage and can cause
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 38
    • A bottle for filtration with a capacity of at least one liter (a bottle with measurement markings is recommended) Note: • Replace the filter with a new one after every liter of pre-treatment solution that is filtered • Do not reuse filters even if they did not filter one liter of solution. Any pre
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 39
    2. Open up a new filter and plate it over the funnel as shown. 39
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 40
    3. Insert the funnel into the mouth of the bottle. 4. Remove the cap from the spout of the pre-treatment solution. 40
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 41
    5. Open the lever and carefully pour one liter of the pre-treatment solution through the filter into the bottle. Note: Be careful not to overfill the funnel and filter with the pre-treatment solution. If there is only a small amount left in the container, carefully tip the container forward to pour
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 42
    6. Once you have poured out a liter of solution, or the container is empty, close the lever and replace the spout cap. 7. Transfer the filtered pre-treatment solution to the intended container for use. If you want to filter more pre-treatment solution, replace the filter with a new one and repeat
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 43
    9. Rinse the used funnel and bottle with water and then wipe the funnel dry with a soft, dry cloth. Note: If you are using tap water to rinse the funnel and bottle, make sure you use distilled or pure water at the end. Some components in tap water can cause coagulation. Parent topic: Pre-treating a
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 44
    Pre-treating a T-shirt with a Roller To prevent colored T-shirt fibers on the roller from sticking to other T-shirts, use a different roller for each color. Note: Apply approximately 0.5 ounces (15 grams) of pre-treatment solution to printing areas of letter/A4-size. Do not apply too much pre-
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 45
    and cause a malfunction or damage the product. If necessary, install the pre-treatment machine in a location away from the printer. Note: Apply approximately 0.5 ounces (15 grams) of pre-treatment solution to printing areas of letter/A4-size. Do not apply too much pre-treatment liquid;
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 46
    4. Place the T-shirt on the pre-treatment machine platen. 5. Set the controls to adequately cover the desired printed area with pre-treatment solution. (On 1 to 100 dial controls, this may be 30 to 45.) We recommend applying the pre-treatment solution to an area larger than the target print area.
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 47
    Design After creating the data, use the Garment Creator 2 software to transmit it to the printer. U.S. and Canada: Visit your product's support website at epson.com/support (U.S.) or epson.ca/support (Canada) and select your product to download the Garment Creator 2 software and utilities. Latin
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 48
    these operations are possible: • Turning off the power • Moving the platen • Cancelling a print job Note: When a USB memory device is connected to the printer, printing starts after saving the data to the USB memory device. This saves you from having to send data again when printing data repeatedly
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 49
    Sleeve platen 1 0.47 inch (12 mm) margins 2 Platen frame 3 Printable area 49
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 50
    Medium-grooved platen 1 0.24 inch (6 mm) margins 2 Platen frame 3 Printable area 4 Rectangle part (you cannot print on this area if this part is removed [for zippers]) 5 2.60 inches (67 mm) 6 7.79 inches (198 mm) 7 6.65 inches (169 mm) 8 1.61 inches (41 mm) 9 6.33 inches (161 mm) 50
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 51
    L, M (standard), S, and XS platens 1 0.24 inch (6 mm) margins 2 Platen frame 3 Printable area Parent topic: Creating Your T-shirt Design Preparing Your Printer Before transmitting print data from the Garment Creator 2 software, check the printer's status and make sure that the print head nozzles are
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 52
    pad prevents the T-shirt from moving around during printing and can reduce print misalignment. We recommend attaching a grip pad to the platen supplied with the printer. You do not need the platen frame when a grip pad is attached to the platen. A medium-size grip pad is included for the medium-size
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 53
    2. Place the platen on a flat surface, align the corners of the grip pad so that they are slightly inside the corners of the platen, and then set the adhesive side of the grip pad to the platen. Note: Do not allow the corners of the grip pad where the backing has not been removed to protrude past
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 54
    4. Carefully lift the grip pad and peel off the other two sections of the grip pad backing. 5. Carefully adhere the rest of the grip pad to the platen and rub each section to adhere it. Parent topic: Preparing Your Printer 54
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 55
    Related references Optional Equipment and Replacement Parts Related tasks Removing the Grip Pad from the Platen Loading a T-shirt on the Grip Pad Removing the Grip Pad from the Platen You can remove the grip pad from the platen. Grip pads that have been on the platen for a long time may be hard to
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 56
    not use solvents such as alcohol to remove the glue. You can damage, warp, or discolor the platen or other parts. Parent topic: Preparing Your Printer Related tasks Attaching the Grip Pad to the Platen 56
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 57
    . 1. If the platen is not in the forward position, press the moveable base button to move the platen forward. 2. Turn off the printer. 3. Remove the platen from the printer, if necessary. Hold the platen on the left and right side and then lift it straight up. Note: If the sleeve platen is
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 58
    4. Rotate the fixing lever as shown to loosen it. 58
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 59
    5. Move the lever to the right to set the scale to setting 8. 59
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 60
    6. Secure the platen gap lever in the raised position by lifting the part shown below and then tightening the fixing lever. 7. Lift the platen gap lever and remove the spacer. 60
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 61
    8. Combine the spacers according to the type of platen you are using and the thickness of the media. Note: The letters A and B are stamped on the side of the spacers. When you are using two spacers, stack them as shown below. 9. Lift the platen gap lever and attach a spacer. 61
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 62
    Installing the Platen After you have removed or attached spacers as necessary, you can install a platen on the printer. 1. Make sure the printer is off and the platen is ejected forward. Turn on the printer and then press the moveable base button to move the platen forward, and then turn off the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 63
    3. Align the platen to fit into the holes in the moveable base and place the platen on the printer. • Install a large, medium, or small hanger platen with the hanger positioned toward the front. Then go to step 5. • Install a large garment, medium garment, small garment,
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 64
    • If you are installing a sleeve platen, install it as shown. Then go to step 4. 64
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 65
    end of the fixing band is on the side of the platen. 5. After installing a platen of a different size, perform a head alignment. Parent topic: Preparing Your Printer Related references Optional Equipment and Replacement Parts 65
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 66
    Related tasks Aligning the Print Head Changing the Platen Height Follow these steps to change the height of the platen. 1. If the platen is not in the forward position, press the forward. 2. Loosen the fixing lever. moveable base button to move the platen 66
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 67
    3. Move the lever to set the scale to the desired position. Move the lever to the right to lower the platen. Move the lever to the left to raise the platen. When the scale is at position P, the platen is at its highest point. 67
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 68
    4. Tighten the fixing lever and then secure the platen gap lever. Parent topic: Preparing Your Printer Loading a T-shirt Refer to these sections to load a T-shirt into the printer. If you notice any creases on the T-shirt, use a heat press to iron them out before loading the shirt. Caution: Do not
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 69
    . Do not use the platen frame with the grip pad. Note: Make sure that the platen you want to use is installed on the printer. 1. Turn on the printer, if necessary. 2. If the platen is not in the forward position, press the moveable base button to move the platen forward. 3. Load the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 70
    Note: The line inside the frame in the illustration below indicates the center of the platen. 4. Gently pull the T-shirt over the edges of the grip pad to flatten it. Note: Do not pull the T-shirt too much; otherwise, the print quality may decline, and any white underbase print may extend outside of
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 71
    may stick to the print head and stain other areas. 6. Remove any slack or creases from the printing surface and make it flat. Note: The printer detects the highest part of the garment surface. If there are any wrinkles, creases, or slack, a platen height error may occur or print quality may
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 72
    7. Press the T-shirt with the grip pad tool and move the grip pad tool across the T-shirt vertically and horizontally from the edges as shown to flatten the printing surface. Repeat as needed to remove any slack or creases from the surface. Note: If the grip pad tool gets dirty, wipe it with a damp
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 73
    on the Platen Before printing, carefully load a T-shirt on the platen using a platen frame. Note: Make sure that the correct platen is installed on the printer. 1. Turn on the printer, if necessary. 73
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 74
    2. If the platen is not in the forward position, press the moveable base button to move the platen forward. 3. Remove the platen frame. 4. Load the T-shirt by sliding the hem of the T-shirt over the platen from the front. Note: The line inside the frame in the illustration below indicates the center
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 75
    5. Gently pull the T-shirt over the edges of the platen to flatten it. Note: • Do not pull the T-shirt too much; otherwise, the print quality may decline, and any white under- base print may extend outside of the image. • Do not use the grip pad tool to smooth the surface when you are using the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 76
    7. Remove any lint from the printing surface and press the fibers flat. Note: There may be lint on the T-shirt if you have not applied pre-treatment solution. Use a lint roller or sticky tape to remove the lint and then press the fibers flat using a hard roller. Lint and fibers may stick to the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 77
    8. Gently pull the edges of the T-shirt outside of the frame to remove any slack. Note: The printer detects the highest part of the garment surface and adjusts the height accordingly. If there are any wrinkles, creases or slack near the inside edge
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 78
    Sleeve Platen Before printing, carefully load a sleeve onto the sleeve platen. Note: Make sure that the correct platen is installed on the printer. 1. Turn on the printer, if necessary. 2. If the platen is not in the forward position, press the forward. moveable base button to move the platen 78
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 79
    3. Remove the platen frame. 4. Slide the sleeve over the platen. 5. Gently pull the sleeve over the edges of the platen to flatten it. 79
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 80
    Note: • Do not pull the sleeve too much; otherwise, the print quality may decline, and any white under- base print may extend outside of the image. • Load the T-shirt so that the side seams and sleeve seams are not on the top. If there are raised sections, such as seams, an error may occur or the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 81
    7. Gently pull the edges of the sleeve outside of the frame to remove any slack. Note: The printer detects the highest part of the garment surface and adjusts the height accordingly. If there are any wrinkles, creases or slack near the inside edge
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 82
    Before printing, carefully load a shirt onto the medium-grooved platen. Note: Make sure that the correct platen is installed on the printer. 1. Turn on the printer, if necessary. 2. If the platen is not in the forward position, press the forward. 3. Remove the platen frame. moveable base button
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 83
    • For shirts with zippers: Go to steps 4 and 5 to remove the middle piece of the platen. Replace the platen and make sure that the zipper section of the shirt fits into the removed section on the platen. 5. Remove the screw as shown. 83
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 84
    6. Slide the middle part of the platen back, then lift it up to remove it. Note: Keep the removed screw and part in a safe place. To install the middle part, perform the removal steps in reverse. Make sure to align the piece with the hole as shown. 84
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 85
    7. Gently pull the shirt over the edges of the platen to flatten it. Note: • Do not pull the shirt too much; otherwise, the print quality may decline, and the white under-base print may extend outside of the image. • Do not use the grip pad tool to smooth the surface when you are using the platen
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 86
    9. Remove any lint from the printing surface and press the fibers flat. Note: There may be lint on the T-shirt if you have not applied pre-treatment solution. Use a lint roller or sticky tape to remove the lint and then press the fibers flat using a hard roller. Lint and fibers may stick to the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 87
    10. Gently pull the edges of the shirt outside of the frame to remove any slack. Note: The printer detects the highest part of the garment surface. If there are any wrinkles, creases or slack near the inside edge of the frame, a platen height
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 88
    . Note: Always perform platen height optimization when using the printer for the first time or when changing between media with or polo shirt is about 0.08 inch (2 mm) in thickness. • If you are using a standard or a hanger platen, use both spacers A and B, and set the scale for the platen gap lever
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 89
    Platen Height Adjustment setting is adjusted to match the media loaded in the printer. Load the media so it is flat with no slack or creasing on > Platen Height Adjustment. 3. Do one of the following: • If you are using a standard or hanger platen, go to step 5. • If you are using a sleeve or medium
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 90
    5. Rotate the fixing lever beneath the platen as shown to loosen it. 90
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 91
    , and then select Start on the next screen. The platen moves into the printer. 8. Do one of the following: • If a message about the media Change the spacer combination you are using according to the tables below: When using a standard or hanger platen: Media thickness* 0.24 to 0.47 inch (6 to 12 mm
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 92
    Media thickness* 0.63 to 0.94 inch (16 to 24 mm) Spacers Remove all * When using a platen without a grip pad, 0.04 inch (1 mm) thicker than the values in the table is acceptable. When using the sleeve or medium grooved platen: Media thickness 0.28 to 0.55 inch (7 to 14 mm) Spacers Remove all If
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 93
    11. Move the lever to the right by one notch to locate the position where the error sound stops. 12. Select OK and then select Done on the next screen. 13. Rotate the fixing lever as shown to tighten it and then secure the platen gap lever. Parent topic: Determining the Height of the Platen 93
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 94
    Note: You can register up to 30 media settings. 1. Turn on the printer, if necessary. 2. Select Media. 3. Select Media Management. The list of to use, then select Use This Setting. Note: You can also copy, edit, or delete the selected media settings from this screen. Parent topic: Determining the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 95
    and press the start button. Note: Reprint data is not overwritten until a new job is sent to the printer. Reprint data is not deleted until the USB memory stick is removed or the printer is turned off. If saving reprint data fails, an error message is displayed when you select Reprint. Reprint
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 96
    2. If a job being sent from the computer to the printer has finished sending, cancel it at the printer. Parent topic: Loading a T-shirt Finishing a T-shirt Follow the instructions in these sections to remove your T-shirt from the printer and fix the ink. Removing a Printed T-shirt Fixing the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 97
    1. Remove the platen frame, if necessary. 2. Hold the T-shirt by the shoulders and carefully remove it from the platen; the ink is still wet and can be easily smudged. 3. Use a heat press or a heat tunnel to fix the ink on the T-shirt. Parent topic: Finishing a T-shirt Related topics Fixing the Ink
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 98
    on the type of heat press or heat tunnel used and the amount of ink, so use the values in these sections only as a guide. Fixing Conditions (Heat Press) Fixing Conditions (Heat Tunnel) Parent topic: Finishing a T-shirt Fixing Conditions (Heat Press) The conditions under which you must fix the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 99
    Note: If you are not printing with White ink and the ink is not completely dry after 30 seconds, extend the duration while carefully checking if the pre-treatment solution is dry. Parent topic: Fixing the Ink Fixing Conditions (Heat Tunnel) Optimum conditions vary depending on the heat tunnel. Test
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 100
    Type of heat tunnel Batch Conveyer Fixing White ink Type of heat tunnel Batch Conveyer Parent topic: Fixing the Ink Temperature 284 °F (140 °C) Temperature 284 °F (140 °C) Time 5 to 10 minutes Time 10 minutes 100
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 101
    run out of media, you can repeat printing simply by operating the printer without having to send the print job again. See the Garment Creator 4GB • Number of data items: Up to 999 (.prn files only) Note: The printer only searches the root folder on the USB memory device for files with a .prn file
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 102
    a USB Memory Device Connecting and Printing from a USB Memory Device You can print from a USB memory device connected to your printer. 1. Make sure the power light on your printer is not flashing. Note: Do not connect or disconnect a USB memory device when the power light is flashing. 2. Connect the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 103
    number of garments are printed, a list of print jobs appears on the printer's screen. Note: To change the number of garments while printing, press the Delete, and then select the data you want to delete. Follow the instructions on the LCD screen to continue. Parent topic: Printing from a USB Memory
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 104
    in these sections to maintain your printer for optimum results. Maintenance Guidelines Maintenance Safety Instructions Print Head Maintenance Print Head Alignment Shaking and Replacing Ink Packs Using the Ink Cleaning Solution Cleaning Around the Print Head Cleaning the Suction Cap
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 105
    Instructions When performing any printer maintenance procedures, follow these safety instructions: • Always wear protective eyewear, gloves, and a mask when performing printer precaution could result in bloodshot eyes or mild inflammation. If problems persist, consult a physician. • If fluid gets in
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 106
    clogged nozzles before large print jobs or if you have not used the printer for an extended period of time. Inspect the printed check pattern and clean head to improve the print quality. Note: If you have been using the printer in Color ink mode for more than two months, a message appears prompting
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 107
    × 200 mm) size. • For sleeve platens, use one sheet in 3.9 inch × 3.9 inch (100 mm × 100 mm) size. Note: The type of media depends on the Printer Mode you are using. For White ink mode, use transparent media, such as OHP film, or colored paper. For Color ink mode, use plain paper
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 108
    • For medium grooved platens, load media on the front-right side of the platen. • For sleeve platens, load media in the center of the raised section. Note: Make sure to place the media in the correct position for the platen you are using or the platen may be soiled with ink. 5. Secure the corners
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 109
    6. Set the height adjustment lever to position P. 7. Select Menu > Maintenance > Print Head Nozzle Check. 8. Confirm that the pattern and platen settings match the type of nozzle check you want to perform. Select Current Settings and make any changes, if necessary. 9. Select Start. The nozzle check
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 110
    using the heavy cleaning level. 1. Make sure the printer is turned on and then select Menu > Maintenance > Head Cleaning on the control panel. 2. Select a cleaning method: • If you select Auto Cleaning, go to step 5. • If you select one of the manual cleaning options, go to the next step. 3. Confirm
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 111
    for some reason. To correct this problem, perform the following procedures from the printer's control panel as necessary: Note: Before performing any adjustments, make sure the nozzles are not clogged and clean the print head, if necessary. • Standard
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 112
    if you change the Platen Gap setting to Manual. 1. If the platen is not in the Confirm the currently selected media settings on the printer's LCD screen. Note: If you want to 5. Select either Standard or Micro Adjust and then do one of the following: • If you selected Standard, go to
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 113
    see more than one row of patterns. For example, in the image here, -1 is the best line. 8. Do one of the following: • If you selected Standard, input the adjustment values for all of the lines you selected and then select OK. A confirmation screen appears. • If you are selected Micro Adjust, input
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 114
    Standard to make adjustments, try using Micro Adjust. • If you selected Micro Adjust to make adjustments, try setting the Platen Gap setting to Manual. units after installing them, and especially when you see a message on the printer's LCD screen telling you to shake the ink. Shake the White ink
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 115
    1. Make sure the product is turned on. 2. Open the ink covers. 115
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 116
    3. Pull one of the ink trays out of the printer. Caution: Place your hand on the bottom of the tray while removing it. If you use only one hand, the weight of the tray may
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 117
    ink may leak. 5. Insert the ink tray back into its slot in the printer. 6. Repeat these steps for any other ink packs that need shaking. Parent topic Handling Ink and Cleaning Packs Handling White Ink Ink Pack Safety Instructions Replacing the Ink Packs Make sure you have your replacement ink
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 118
    until you are ready to install the ink. If you see a message to replace the White ink packs, replace the ink pack immediately or the printer may be damaged. Note: If a message is displayed telling you that it is time to replace an ink supply unit, you can view the replacement
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 119
    3. Pull out the ink tray for the ink pack that you are replacing. Caution: Place your hand on the bottom of the tray while removing it. If you use only one hand, the weight of the tray may cause it to fall and damage the ink pack. 4. Lift the expended ink pack out of the tray. 119
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 120
    Caution: Be careful handling the ink pack as there may be ink around the ink supply port. Do not touch the areas on the ink pack shown below. Warning: If ink gets on your skin, wash it thoroughly with plenty of soap and water. If ink gets into your eyes, flush them immediately with water. If ink
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 121
    the color on the ink pack label with the color for the slot on the printer, then insert the ink tray into the slot and push it in firmly. Caution it. Make sure the ink pack color matches the color for the slot on the printer. 8. Repeat these steps for any other ink packs that need replacing. Note:
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 122
    follow these safety instructions: • Use the ink cleaning solution to clean only the parts mentioned above or you could damage the printer. • If cleaning this precaution could result in bloodshot eyes or mild inflammation. If problems persist, consult a physician. • If cleaning solution gets in your
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 123
    • Do not use ink cleaning solution that has already been used to clean something else. Using dirty ink cleaning solution causes stains. • Used ink cleaning solution is classified as industrial waste. Dispose of it in the same way as waste ink. • Wash your hands thoroughly after using the cleaning
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 124
    into a new large cleaning swab. 2. Make sure the printer is on, and then select the inside light icon on the LCD screen to turn on the lights inside the printer. 3. Select Menu > Maintenance > Cleaning the Maintenance Parts > Around the Head
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 125
    Do not move the print head or the platen manually. A malfunction may occur. Note: A buzzer the LCD screen. 8. Follow the on-screen instructions to clean around the print head. Note: Do not touch stick. 9. After cleaning is finished, close the printer cover and then select Done on the LCD screen
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 126
    print quality may decline. 1. Turn on the printer, if necessary. 2. Select Menu > Maintenance Do not move the print head or the platen manually. A malfunction may occur. Note: A buzzer sounds to view the steps and follow the on-screen instructions. Caution: Use only the supplied plastic tweezers. Be
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 127
    move the platen manually; otherwise, a malfunction may occur. Note: If you continue to use the printer without cleaning the sensor cover, the printer may not detect maintenance position. 4. Select How To... and follow the on-screen instructions. Note: • If the ink stains cannot be removed completely,
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 128
    the industrial waste disposal company, make sure you include the Safety Data Sheet found on Epson's support website. To download it, visit epson.com/support/sds (U.S. and Latin America) or epson.ca/support/sds (Canada) and select your product. (Safety Data Sheets are available in English only.) The
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 129
    you see a message on the printer's LCD screen that the waste ink bottle is nearing or at the end of its service life, you need to replace the to observe this precaution could result in bloodshot eyes or mild inflammation. If problems persist, consult a physician. • If ink gets in your mouth, consult
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 130
    Sheet found on Epson's support website. To download it, visit epson.com/support/sds (U.S. and Latin America) or epson.ca/support/sds (Canada) and Bottle When you see a message on the printer's LCD screen that the waste ink bottle is at the end of its service life, you need to replace the waste
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 131
    2. Remove the waste ink bottle from the waste ink bottle holder. 3. Insert the waste ink tube into the mouth of the new waste ink bottle and set the waste ink bottle in the holder. Caution: Verify that the waste ink tube is still inserted into the neck of the bottle. If the waste ink tube comes out
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 132
    replace the head cleaning set before it is at the end of its service life, make sure to initiate replacement from the printer's menu (Menu > Maintenance > Replace Maintenance Parts > Head Cleaning Set). 1. Turn on the printer, if necessary. 2. Do one of the following: • If the message appears on the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 133
    4. Select How To... to view the steps and follow the on-screen instructions. Note: A buzzer sounds 10 minutes after the platen and print head move to the maintenance position. Select OK to continue cleaning. The buzzer sounds again
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 134
    , if necessary. 2. Press the moveable base button to move the platen into the printer to the maintenance position. Caution: Do not manually move the platen; otherwise, a malfunction may occur. 3. Turn off the printer and confirm that the LCD screen turns off. 4. Pour about 0.15 ounce (5 ml) of
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 135
    Caution: • Make sure that ink cleaning solution does not drip into the printer. If any cleaning solution does drip, wipe it with a dry cleaning wipe. • Do not touch the the right side may detach or the encoder strip (carriage scale) may be damaged, causing the printer to operate incorrectly. 135
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 136
    liquid ink packs, prepare new ink when ink packs are running low. 1. Turn on the printer, if necessary. 2. Select Menu > General Settings > Printer Settings > Printer Mode. 3. Follow the on-screen instructions and then select Start. Note: Select How To... on the screen to view the steps. 136
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 137
    stick. Parent topic: Maintenance Related references Handling Ink and Cleaning Packs Ink Pack Safety Instructions White Ink Quality Is Poor Optional Equipment and Replacement Parts Related tasks Storing the Printer Cleaning the Platen Without a Grip Pad If the platen without a grip pad is dirty
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 138
    wrung tight. After that, dry the platen with a soft cloth. Parent topic: Maintenance Related tasks Using the Ink Cleaning Solution Cleaning the Printer To keep the printer in optimum condition, you need to clean it periodically, along with the platen and the platen frame. 1. If the platen is not in
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 139
    of detergent. Wipe off excess moisture with a dry, soft cloth. 5. Remove any dust or dirt from the printer cover in the same manner. Note: To reduce ink mist buildup inside your printer, clean it regularly using a small amount of cleaning solution on a lint-free cloth. Gently clean the flat surfaces
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 140
    Moving or Transporting the Printer Follow the instructions in these sections to prepare and move the printer, and set it back up after moving it. When transporting the printer, protect it from shock and vibration by packing it using the packing materials it came with. If the printer will be in
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 141
    the printer, touch only the necessary areas and grip it where indicated in the illustration below. There are recessed hand holds on the bottom of the printer and the * marks in the illustration denote non-slip pads. Moving the Printer Setting Up the Printer After Transport Storing the Printer 141
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 142
    Moving the Printer You can move the printer across the room or to another room on the same floor, or transport it to another building or location as described here. Note: Wear the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 143
    2. Loosen the fixing lever. 143
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 144
    3. Move the platen gap lever to the right to set the scale to 8. 144
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 145
    the fixing lever and then secure the platen gap lever. 5. Make sure the printer is turned off and disconnect any cables. 6. Do one of the following: • If you are moving the printer nearby, go to step 9. • If you are transporting the printer to another floor or location, go to the next step. 145
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 146
    7. Move the moveable base by hand to the position shown below. Caution: Never move the moveable base by hand except as outlined for this purpose; otherwise, a malfunction may occur. 146
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 147
    8. Re-install the carriage lock that you removed during initial setup and then secure it with the screw. 147
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 148
    9. Carefully remove the waste ink tube from the waste ink bottle. 10. Remove the waste ink bottle. 11. Remove the waste ink tube from the tube clamps. 148
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 149
    12. Unscrew the rear cover fixing screws. 13. Remove the rear cover. 149
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 150
    14. Hold the waste ink tubes from the bottom with a wipe and then pull them out as shown. Use the wipe to wipe waste ink from the waste ink outlets. Note: Be careful when removing the waste ink tubes; waste ink may spill from the outlet or tube. 150
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 151
    tube and the waste ink bottle. 4. Install the platen you want to use. 5. Connect the power cable to an electrical outlet and turn on the printer. 6. Perform a nozzle check and confirm that there are no clogged nozzles. 7. Align the print head and check the print quality. 151
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 152
    for one month or longer, go to the next step. 2. Turn on the printer, if necessary. 3. Select Menu > Maintenance > Keeping Preparation. 4. Read the on-screen messages and then select Start. 5. Follow the on-screen instructions to perform the procedure. Note: Select How To... on the screen to view
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 153
    you do not forcefully press or move the cleaning stick. Parent topic: Moving or Transporting the Printer Related references Storing Your Printer White Ink Quality Is Poor Ink Pack Safety Instructions Optional Equipment and Replacement Parts Related tasks Replacing the Waste Ink Bottle Changing the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 154
    Follow the instructions in these sections to access the printer menu system and select settings. Accessing the Printer's Menus Basic Settings Menu Printer Settings Menu Maintenance Settings Network Settings Menu Media Settings Maintenance Menu Printer Status Menu Accessing the Printer's Menus You
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 155
    replacement of consumables Adjusts the volume and repetition of error notifications Adjusts the type of control panel sounds Select the amount of time until the printer enters sleep mode (1 to 240 minutes) Allows you to set the method for waking from sleep mode Enter the date and time Select the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 156
    Color ink mode Head Movement Range Data Width Printer Width Inside Light Restore Default Settings Auto Manual Network Settings Clear All Data and Settings Description Select the ink mode for the printer Note: This setting is not displayed if the printer is in High speed color mode. Sets the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 157
    Max Retry Cleaning Count sets the number of times maintenance is repeated if nozzles are still clogged after cleaning the print head. Set what the printer should do when the Threshold of Clogged Nozzles is exceeded • Stop Printing displays a message on the LCD screen and stops printing • Show Alert
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 158
    Menu Select Menu > General Settings > Network Settings to configure your printer's network settings. Setting Network Status Advanced Options Wired LAN Status Media Platen Gap Options 01 to 30 Auto Manual Description Select a registered media settings entry Change the platen gap settings 158
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 159
    Adjustments options Setting Print Head Alignment Options Standard Micro Adjust Media Feed Adjustment -1.00% the print head Description Change details for registered media settings • Select Change Name to edit the name of a registered media setting entry • Select Platen Gap to adjust the distance
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 160
    Maintenance Menu Settings on the Maintenance menu let you run essential printer maintenance utilities. Caution: Follow the instructions in the topic links below the table to use these menu settings correctly. Setting Print Head Nozzle Check Options Pattern Type Platen Type Description Select
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 161
    Select to move the platen and print head to the maintenance position for the selected cleaning option Perform if you are storing the printer for a long time (one month or more) Parent topic: Using the Control Panel Menus Related references Optional Equipment and Replacement Parts Related tasks
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 162
    Check these sections for solutions to problems you may have using your product. Product Status Messages Solving Printer Problems Solving Printing Problems Solving Print Quality Problems Uninstall Your Product Software Where to Get Help (U.S. and Canada) Where to Get Help (Latin America) Product
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 163
    and start again. Cannot run "Auto Cleaning". Select cleaning strength manually and run Cleaning. No reprint data found. A memory device or a different USB memory stick. • The USB memory stick was removed from the printer while data was being written or read. Before removing the USB memory stick,
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 164
    both the outlet and the printer, and then reconnect them. Turn the printer on and off several times. If the same error message is displayed on the LCD screen, contact Epson for support and provide them with the displayed service code. Parent topic: Solving Problems Related references Where to Get
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 165
    Make sure the power outlet works by connecting the power cable for another electronic device. Parent topic: Solving Printer Problems LCD Screen Shuts Off If the LCD screen shuts off intermittently, the printer may be in sleep mode. Try these solutions: • Press any of the buttons on the control panel
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 166
    (Carriage Scale) Printing Is Slow or Stops Intermittently Cannot Access the USB Memory Device Red Light Shines Inside the Printer Forgot the Administrator Password Parent topic: Solving Problems Nothing Prints If you have sent a print job and nothing prints, try these solutions: • Make sure your
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 167
    Guide. • If you are using TCP/IP, make sure the printer's IP address is set correctly for your network. If your network does not assign IP addresses using DHCP, set the IP address manually nozzles were cleared. If the problem remains, contact your dealer or Epson for support. Note: Use a transparent
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 168
    is adjusted correctly. The printer cannot print if the platen is too far from the print head. If Platen Gap is set to Manual, check that the spacer combination and platen height (scale) are suitable for the type of media you are using. Parent topic: Solving Printing Problems Related references Where
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 169
    Press the moveable base button to move the platen inside the printer. 6. Check the LCD screen and do the following: • scale). If the cleaning message appears again, contact Epson for support. Parent topic: Solving Printing Problems Related references Where to Get Help (U.S. and Canada) Where to
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 170
    Memory Device The USB memory device is not read by just inserting it into the printer's USB port. Select the USB icon on the Home screen and then select your is connected to the printer. Parent topic: Solving Printing Problems Related topics Printing from a USB Memory Device Red Light Shines
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 171
    you created during network setup, contact Epson for support. Parent topic: Solving Printing Problems Related references Where to Get Help (U.S. and Appear Outside the Printed Areas Printer Status Sheet or Logs Print Incorrectly Parent topic: Solving Problems Nozzle Check Pattern Prints Incorrectly
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 172
    print head nozzles are clogged. Then clean the print head, if necessary. • If the print surface is too far from the print head, the following problems may occur: • Lines in the image (banding) • Edges of the image are blurry • Text and straight lines are duplicated • Image is grainy Check that the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 173
    the expiration date printed on the package (within a year of installation in the printer). Replace expired ink packs with new ones. • Make sure you are using the media so that is flat. If the problem persists, do the following: 1. Set Platen Gap to Manual. 2. Check that the spacers you are using
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 174
    are printing vivid colors, try setting Quality for Color Print Quality or White Print Quality in the Garment Creator 2 software. Parent topic: Solving Print Quality Problems Related references Media Settings 174
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 175
    registered media setting. • Change the Platen Gap setting to Manual. • You may see lines in prints created using the in the Garment Creator 2 software or the printer's menus. If lines are still visible, . Parent topic: Solving Print Quality Problems Related references Media Settings Related tasks
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 176
    registered media setting. • Change the Platen Gap setting to Manual. • Clean the surface of the T-shirt. Remove any is 360 dpi); see your software documentation for instructions. • If you are printing over a USB Parent topic: Solving Print Quality Problems Related references Media Settings Related
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 177
    mode to Color ink mode, and then back to White ink mode. 3. If changing the printer mode does not resolve the issue, contact your dealer or Epson for support. Parent topic: Solving Print Quality Problems Related references Where to Get Help (U.S. and Canada) Where to Get Help (Latin America) Fixing
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 178
    Aligning the Print Head Cleaning the Print Head Changing the Printer Mode Related topics Pre-treating a T-shirt Shaking and Replacing Ink Packs Ink Stains Appear Outside the Printed . Filter the solution to remove the any coagulation before using it. Parent topic: Solving Print Quality Problems 178
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 179
    you are printing with a medium size (standard) platen. Parent topic: Solving Print Quality Problems Related tasks Installing the Platen Uninstall Your Product Software If you have a problem that requires you to uninstall and re-install your software, follow the instructions for your operating system
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 180
    uninstallation. 5. Restart your computer, then re-install your software. Note: If re-installing your product software does not solve a problem, contact Epson support. Parent topic: Uninstall Your Product Software Related references Where to Get Help (U.S. and Canada) Where to Get Help (Latin America
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 181
    make sure you have your printer serial number and proof of purchase. Visit epson.com/support (U.S.) or epson.ca/support (Canada) and select your product for solutions to common problems. You can download drivers, firmware, and documentation, get FAQs and troubleshooting advice, or e-mail Epson with
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 182
    product, contact Epson. Epson provides these technical support services: Internet Support Visit Epson's support website at latin.epson.com/support for solutions to common problems. You can download drivers and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 183
    accessories from an Epson authorized reseller. To find the nearest reseller, visit latin.epson.com or call your nearest Epson sales office. Parent topic: Solving Problems 183
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 184
    how to return your Epson products for proper disposal. Windows System Requirements Mac System Requirements Printer Specifications Supported Media Specifications Interface Specifications Electrical Specifications Environmental Specifications Dimension Specifications Ink Specifications Cleaning Ink
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 185
    Note: For the latest product software available for your operating system, visit the Epson support site at epson.com/support (U.S.), epson.ca/support (Canada), or latin.epson.com/support (Latin America), select your product, and select Downloads. Parent topic: Technical Specifications Mac System
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 186
    Printer Specifications Printing method On-demand ink jet Nozzle configuration White Ink Mode: White: 400 Platen feed method Conveyor belt Built-in memory 1GB Parent topic: Technical Specifications Supported Media Specifications Thickness 1.06 inches (27 mm) or less Weight Note: The
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 187
    on polyester Tshirts or when printing white ink on cotton T-shirts. Parent topic: Technical Specifications Interface Specifications USB Interface Ethernet Standards Front: High-Speed USB port compatible with USB 2.0 specification (for connection of non-encrypted USB drive for printing) Rear: High
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 188
    °F (40 °C) Storage (after unpacking): -4 to 104 °F (-20 to 40 °C); within 1 month at 104 °F (40 °C) Humidity (non-condensing) Note: • Operating the printer when the temperature around the printhead exceeds 86 °F (30 °C) will cause more frequent automatic cleaning cycles. • Make sure you use the
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 189
    1448 mm) 208.3 lb (94.5 kg) (with supplied platen installed; not including ink supply units) Parent topic: Technical Specifications Ink Specifications Note: This printer is designed for use with Epson ink packs only, not third-party ink packs or ink. Other brands of ink supplies are not compatible
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 190
    See the date printed on the package; at normal temperature Operating: 50 to 95 °F (10 to 35 °C) Storage (in package and after installation in printer): -4 to 104 °F (-20 to 40 °C); within 4 days at -4 °F (-20 °C) and 1 month at 104 °F (40 °C) Transporting (in package): -4 to 140 °F (-20 to 60
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 191
    Temperature Capacity Dimensions (box) Operating: 50 to 95 °F (10 to 35 °C) Storage (in package): Cotton pre-treatment solution: -4 to 104 °F (-20 to 40 °C); within 4 days at -4 °F (-20 °C) and 1 month at 104 °F (40 °C) Polyester pre-treatment solution: 32 to 104 °F (0 to 40 °C); within 4 days at 32
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 192
    Parent topic: Technical Specifications Safety and Approvals Specifications United States Canada Safety: UL62368-1 EMC: FCC part 15 Subpart B class A Safety: CAN/CSA C22.2 No. 62368-1 EMC: ISED ICES-003 Class A Note: This is a class A product. In a domestic environment, this product may cause
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 193
    Before using your Epson product, read and follow these safety instructions. List of Safety Symbols on the Product General Product Safety Instructions LCD Screen Safety Instructions Ink Pack Safety Instructions Parent topic: Notices List of Safety Symbols on the Product The following table
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 194
    with special care. Parent topic: Important Safety Instructions General Product Safety Instructions • Be sure to follow all warnings and instructions marked on the product. • Do not attempt to service this product yourself. • Do not install or store the printer in an unstable location or a location
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 195
    • Do not install the printer in locations subject to oily smoke and dust, or in locations subject to humidity or where it could easily get wet. • Use only the type
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 196
    product for sufficient ventilation. Do not block or cover openings in the cabinet or insert objects through the slots. • Do not cover the printer with a cloth or install it in a location with poor ventilation. • Keep the product away from potential sources of electromagnetic interference, such as
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 197
    service the product yourself. • Unplug the product and refer servicing to qualified service are covered by the operating instructions. • Before storing the may leak. • Do not use the printer in locations with volatile substances such as contact your dealer or Epson Support. • Only route the cables
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 198
    do not touch or attempt to remove the broken pieces; contact Epson for support. • Do not subject your product to sudden changes in temperature or humidity is damaged in any way. Parent topic: Important Safety Instructions Ink Pack Safety Instructions • Keep cleaning packs, waste ink, ink cleaner, pre
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 199
    to observe this precaution could result in bloodshot eyes or mild inflammation. If problems persist, consult with a physician. • If swallowed, do not induce vomiting if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 200
    Parent topic: Notices Binding Arbitration and Class Waiver 1. DISPUTES, BINDING INDIVIDUAL ARBITRATION, AND WAIVER OF CLASS ACTIONS AND CLASS ARBITRATIONS 1.1 Disputes. The terms of this Section 1 shall apply to all Disputes between you and Epson. The term "Dispute" is meant to have the broadest
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 201
    1.5 WAIVER OF CLASS ACTIONS AND CLASS ARBITRATIONS. YOU AND EPSON AGREE THAT EACH PARTY MAY BRING DISPUTES AGAINST THE OTHER PARTY ONLY IN AN INDIVIDUAL CAPACITY, AND NOT AS A PLAINTIFF OR CLASS MEMBER IN ANY CLASS OR REPRESENTATIVE PROCEEDING, INCLUDING WITHOUT LIMITATION FEDERAL OR STATE CLASS
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 202
    to this Agreement (including without limitation the purchase, download, installation of the Software or other applicable use of Epson Hardware, products and services) that specifies (i) your name, (ii) your mailing address, and (iii) your request to be excluded from the final, binding individual
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 203
    SureColor®, and UltraChrome® are registered trademarks, and the EPSON logo is a registered logomark of Seiko Epson Corporation. Epson PreferredSM is a service mark 's operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use
  • Epson SureColor F2270 Standard Edition | Users Guide - Page 204
    Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Epson approved Products by Seiko Epson Corporation. This information is subject to change without notice. A Note
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
Epson
®
SureColor
®
F2270 User's Guide