Epson SureColor P5370 Standard Edition Start Here - Installation Guide
Epson SureColor P5370 Standard Edition Manual
![]() |
View all Epson SureColor P5370 Standard Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson SureColor P5370 Standard Edition manual content summary:
- Epson SureColor P5370 Standard Edition | Start Here - Installation Guide - Page 1
this product, make sure you read these instructions and the safety instructions in the online User's Guide. 2 Remove the outer carton from the Make sure to place the printer on a flat, stable surface capable of supporting the weight of the printer (including ink and paper) and with enough space - Epson SureColor P5370 Standard Edition | Start Here - Installation Guide - Page 2
or you'll waste ink. Note: • You may need to replace the maintenance box (part number T619000) soon after ink initialization. See the online User's Guide for instructions. • See the online User's Guide for instructions on loading paper and using the paper cassette cover. - Epson SureColor P5370 Standard Edition | Start Here - Installation Guide - Page 3
don't have a User's Guide icon, go to the Epson website, as described in "Epson technical support." Epson technical support Visit http://epson.com/support/p5370 (U.S.) or http://epson.ca/support/p5370 (Canada) to download software and utilities, view manuals, get FAQs and troubleshooting advice, or - Epson SureColor P5370 Standard Edition | Start Here - Installation Guide - Page 4
EPSON and SureColor are registered trademarks and the EPSON logo is a registered logomark of Seiko Epson Corporation. Epson Preferred is a service mark of Epson America, Inc. Mac is a trademark of Apple Inc., registered in the U.S. and other countries. Windows is a trademark of the Microsoft
![](/manual_guide/products/epson-surecolor-p5370-standard-edition-start-installation-guide-f12f470/1.png)
Epson
®
SureColor
®
P5370
Start Here
IMPORTANT:
Before using this product, make sure you read these instructions
and the safety instructions in the online
User’s Guide
.
Choose a Location for the Printer
Choose a location for the printer that is near a wall outlet where the power cord
can be easily unplugged. Avoid places subject to rapid changes in temperature
and humidity. Also keep the printer away from direct sunlight, strong light, or
heat sources.
Make sure to place the printer on a flat, stable surface capable of supporting the
weight of the printer (including ink and paper) and with enough space on all
sides (see illustration and table below).
Note:
See the online
User’s Guide
for your printer’s weight specifications.
7.17 in.
(182 mm)
21 in.
(533 mm)
W
D
D1
H
45.79 in. (1,163 mm)
53.11 in. (1,349 mm)
5.91 in. (150 mm)
23.07 in. (586 mm)
Note:
If you are loading rigid poster board, the back of the printer must be at least
15.6 in. (396 mm) away from the wall.
Unpack and Place Printer
1
Make sure you have these items:
Printer
Initial ink cartridges (10)
Spindle
Cleaning sheets
Limited warranty
Power cord
Borderless printing
spacer
Paper cassette
cover
2
Remove the outer carton from the pallet and printer and carefully lift
the printer off of the pallet.
WARNING:
The printer requires two people to lift and move it. Make sure to
grip the printer as shown in the illustration.
3
Remove all tape from the outside of the printer.
Note:
The shape, number, and position of the protective materials are subject
to change without notice.
4
Open the top cover and remove the tape and protective piece as shown.
WARNING:
The printer may malfunction if you do not remove the protective
piece.
Note:
Do not throw the protective piece away; you need it if you transport the
printer.
5
Close the top cover.
6
Lift the edge of the output tray and pull it out to remove it.
7
Extend the output tray and then remove all protective materials and tape
from it.
8
Pull out the paper cassette and remove all protective materials.