Epson SureColor P5370 Standard Edition Administrator Guide
Epson SureColor P5370 Standard Edition Manual
![]() |
View all Epson SureColor P5370 Standard Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson SureColor P5370 Standard Edition manual content summary:
- Epson SureColor P5370 Standard Edition | Administrator Guide - Page 1
Administrator's Guide - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 2
- Epson SureColor P5370 Standard Edition | Administrator Guide - Page 3
Contents Administrator's Guide...7 Using Web Config Network Configuration Software 8 About Web Config ...8 Accessing Web Config ...8 Restricting Features Available for Users 9 Changing the Administrator Password in Web Config 10 - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 4
security certificate does not match" Message Appears 46 Model Name or IP Address Not Displayed in EpsonNet Config 46 Solving Network Security Problems 46 Pre-Shared Key was Forgotten ...47 Cannot Communicate with the Product Using IPsec Communication 47 Communication was Working, but Stopped 48 - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 5
Notices ...53 Trademarks ...53 Copyright Notice...53 Copyright Attribution ...54 5 - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 6
- Epson SureColor P5370 Standard Edition | Administrator Guide - Page 7
settings: Web Config and EpsonNet Config. This guide covers Web Config in detail; for information software settings screen.) Epson products support the following system administration functions: Individual protocol control: enable and disable single services • Enable or disable direct connections via - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 8
display all available menus. 1. Print a network status sheet for your product and identify the product IP address. See the product's User's Guide for instructions. 2. Start your web browser and make sure JavaScript is enabled. 3. Type the product IP address into the browser as follows, depending on - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 9
SSL/TLS Settings Obtaining and Importing a CA-signed Certificate Updating a Self-signed Certificate Restricting Features Available for Users Follow the instructions in these sections to restrict users from using certain product features using the administrator password and Web Config software. 9 - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 10
in all cases. Note: See your product's User's Guide for instructions on setting an administrator password using the control panel. If you forget your administrator password, contact Epson for support, as described in the product's User's Guide. 1. Access Web Config and select the Product Security - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 11
5. Click OK. Parent topic: Restricting Features Available for Users Locking the Settings With the administrator password, you can use the Web Config interface or the control panel to prevent non-administrators from changing some settings in the settings menu. 1. Access Web Config and log in using - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 12
LCD screen before starting the update. Parent topic: Using Web Config Network Configuration Software Using Your Product on a Secure Network Follow the instructions in these sections to configure security features for your product on the network using the Web Config software. Encrypting the Password - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 13
on a Secure Network Configuring SSL/TLS Communication Follow the instructions in these sections to configure SSL/TLS communication using Web Product on a Secure Network Configuring SSL/TLS Settings If your product supports HTTPS, you can configure SSL/TLS to encrypt communications with your product - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 14
You see a window like this: 3. Select one of the options for the Encryption Strength setting. 4. Select Enable or Disable as the Redirect HTTP to HTTPS setting as necessary. 5. Click Next. You see a confirmation message. 6. Click OK. Parent topic: Configuring SSL/TLS Communication Configuring a - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 15
Click Next. You see a confirmation message. 5. Click OK. Parent topic: Configuring SSL/TLS Communication Configuring IPsec/IP Filtering Follow the instructions in these sections to configure IPsec/IP traffic filtering using Web Config. About IPsec/IP Filtering Configuring Default IPsec/IP Filtering - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 16
filter traffic to the product over the network based on IP address, service, and port by configuring a default policy that applies to every users or user groups, you can configure group policies. Note: IPsec is supported only by computers running Windows Vista or later, or Windows Server 2008 or - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 17
Parent topic: Configuring IPsec/IP Filtering Configuring Group IPsec/IP Filtering Policies You can configure group policies for IPsec/IP traffic filtering using Web Config. 1. Access Web Config and select the Network Security tab. 2. Under IPsec/IP Filtering, select Basic. 3. Click a tab number for - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 18
IPsec/IP Filtering Policy Settings Default Policy Settings Setting Access Control IKE Version Authentication Method Pre-Shared Key Confirm Pre-Shared Key ID Type ID Encapsulation Remote Gateway(Tunnel Mode) Options/Description Permit Access to permit IP packets to pass through Refuse Access to - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 19
Setting Security Protocol Algorithm Settings Group Policy Settings Setting Access Control Local Address(Printer) Remote Address(Host) Method of Choosing Port Service Name Options/Description If you selected IPsec as the Access Control option, select one of these security protocols: ESP: to ensure - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 20
Setting Transport Protocol Local Port Remote Port IKE Version Authentication Method Pre-Shared Key ID Type ID Options/Description If you selected Port Number as the Method of Choosing Port option, select one of these encapsulation modes: Any Protocol TCP UDP ICMPv4 See the Group Policy Guidelines - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 21
if data encryption is prohibited, you can use IPsec Select the encryption algorithm settings for the security protocol you selected Group Policy Guidelines Service name Any ENPC Protocol type Local/Remote port number - - UDP 3289/Any port SNMP UDP 161/Any port LPR RAW (Port9100) TCP TCP - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 22
Service name IPP/IPPS WSD WS-Discovery FTP Data (Local) Protocol type Local/Remote port number TCP Printer Settings Use this example to allow communication of printing data and printer settings from specified services. Default policy: • IPsec/IP Filtering: Enable • Access Control: Refuse Access 22 - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 23
Group policy: • Access Control: Permit Access • Remote Address(Host): Client IP address • Method of Choosing Port: Service Name • Service Name: Select ENPC, SNMP, HTTP (Local), HTTPS (Local), and RAW (Port9100) Receiving Access from Only a Specified Address for Product Access In these examples, the - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 24
. Parent topic: Configuring IPsec/IP Filtering Related tasks Obtaining and Importing a CA-signed Certificate Configuring SNMPv3 Protocol Settings If your product supports the SNMPv3 protocol, you can monitor and control access to your product using that protocol. 1. Access Web Config and select the - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 25
Settings Connecting the Product to an IEEE 802.1X Network Follow the instructions in these sections to connect the product to an IEEE 802.1X Product on a Secure Network Configuring an IEEE 802.1X Network If your product supports IEEE 802.1X, you can use it on a network with authentication provided - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 26
the IEEE802.1X (Wired LAN) setting. 4. To use the product on a Wi-Fi network, enable your product's Wi-Fi settings. See your product's User's Guide for instructions. The status of the connection is shown as the IEEE802.1X (Wi-Fi) setting. Note: You can share the network settings for Ethernet and Wi - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 27
/3DES/AES128/RC4 Parent topic: Connecting the Product to an IEEE 802.1X Network Configuring a Certificate for an IEEE 802.1X Network If your product supports IEEE 802.1X, you can configure a certificate for the network using Web Config. 27 - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 28
You can check the status of the IEEE 802.1X network settings by printing a status sheet from your product. See the product's User's Guide for instructions on printing a network status sheet. The network status sheet displays the information in this table for IEEE 802.1X networks. Status ID Disable - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 29
(PEAP/MSCHAPv2 or EAP-TTLS) Parent topic: Connecting the Product to an IEEE 802.1X Network Using a Digital Certificate Follow the instructions in these sections to configure and use digital certificates using Web Config. About Digital Certification Obtaining and Importing a CA-signed Certificate - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 30
CA-signed Certificate You can ensure secure communications using a CA-signed certificate for each security feature. The certificates must be signed by and obtained from a CA (Certificate Authority). CA Certificate A CA certificate indicates that a third party has verified the identity of a server. - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 31
connected to the product. Before proceeding, make sure the time and date settings are correct on your product. See the product's User's Guide for instructions. 10. Select the Network Security tab again, and select your network security option and the corresponding certificate. 11. In the CA-signed - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 32
14. Click OK. You see a confirmation message. 15. Click Confirm to verify the certificate information. Parent topic: Using a Digital Certificate CSR Setup Settings You can select these settings when setting up a CSR in Web Config. Note: The available key length and abbreviations vary by certificate - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 33
Certificate format PEM/DER format obtained from Web Config PEM/DER format obtained from a computer PKCS#12 format obtained from a computer Setting descriptions Private Key: Do not configure because the product contains a private key Password: Do not configure CA Certificate 1/CA Certificate 2: - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 34
Updating a Self-signed Certificate If your product supports the HTTPS server feature, you can update a self-signed certificate using Web Config. 1. Access Web Config and select the Network Security tab. 2. Under SSL/TLS, - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 35
Importing a CA Certificate You can import a CA certificate using Web Config. 1. Access Web Config and select the Network Security tab. 2. Select CA Certificate. 3. Select Import. 4. Select the CA certificate you want to import. 5. Click OK. When you see the CA Certificate page and the imported - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 36
disable protocols using Web Config. 1. Access Web Config and select the Network Security tab. 2. Select or deselect the checkbox next to the service name to enable or disable a protocol. 3. Configure any other available protocol settings. 4. Click Next. 5. Click OK. After the protocols restart, the - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 37
Protocols Name Bonjour SLP WSD LLTD LLMNR LPR RAW(Port9100) IPP FTP SNMPv1/v2c SNMPv3 Bonjour Settings Setting Use Bonjour Bonjour Name Bonjour Service Name Location Top Priority Protocol Wide-Area Bonjour Description Bonjour is used to search for devices SLP is used for network searching in - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 38
SLP Settings Setting Enable SLP WSD Settings Setting Enable WSD Printing Timeout (sec) Device Name Location LLTD Settings Setting Enable LLTD Device Name LLMNR Settings Setting Enable LLMNR LPR Settings Setting Allow LPR Port Printing Options/Description Enable the SLP function to use network - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 39
Communication Timeout (sec) URL(Network) URL(Wi-Fi Direct) Printer Name Location Options/Description Enable IPP communication for products that support IPP are displayed Allow the printer to communicate without any security measures (IPP) Enter the timeout value for IPP printing between - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 40
/v2c Access Authority Community Name (Read Only) Community Name (Read/Write) Allow access from Epson tools Options/Description Enable SNMPv1/v2c for products that support SNMPv3 Set the access authority when SNMPv1/v2c is enabled to Read Only or Read/Write Enter 0 to 32 ASCII characters Enter 0 to - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 41
the product to a network. See the product's User's Guide for instructions. Installing EpsonNet Config Configuring a Product IP Address Using EpsonNet support page at epson.com/support (U.S.), epson.ca/support (Canada), or latin.epson.com/support (Caribbean) and follow the on-screen instructions. - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 42
password if necessary, and click OK. 6. From the menu on the left, under TCP/IP, select Basic. You see a window like this: 7. Select Manual. 8. Enter the product's IP address, Subnet Mask, and Default Gateway settings in the fields provided. Note: To connect the product to a secure network, enter - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 43
10. Enter the current administrator password if necessary, and click OK. Parent topic: Using EpsonNet Config Network Configuration Software 43 - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 44
, and configure network settings in a batch operation. See the Epson Device Admin help for instructions. To install Epson Device Admin, download the software from the support page at epson.com/support (U.S.), epson.ca/support (Canada), or latin.epson.com/support (Caribbean) and follow the on-screen - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 45
Name or IP Address Not Displayed in EpsonNet Config Parent topic: Solving Problems Cannot Access Web Config If you cannot access Web Config on your product's User's Guide for instructions. • If you selected High as the Encryption Strength setting in Web Config, your browser must support AES (256 - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 46
you entered for the Common Name setting, and obtain and import a certificate again, or change the product name. Parent topic: Solving Network Software Usage Problems Model Name or IP Address Not Displayed in EpsonNet Config If the product model name and/or IP address is not displayed in EpsonNet - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 47
Config for the default or group policy. Parent topic: Solving Network Security Problems Cannot Communicate with the Product Using IPsec Communication Make sure your computer is using one of these supported algorithms for communicating with the product: Security method IKE encryption algorithm IKE - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 48
are using a CA certificate, make sure it is imported to the computer that is accessing the product. Parent topic: Solving Network Security Problems Cannot Connect After Configuring IPsec/IP Filtering The set value may be incorrect. Disable IPsec/IP filtering from the product's control panel. Connect - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 49
Warning Messages Cannot Import a Digital Certificate Cannot Update a Certificate or Create a CSR Deleted a CA-signed Certificate Parent topic: Solving Problems Digital Certificate Warning Messages If you see a warning message when using a digital certificate, check for solutions in this table - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 50
product are connected, and the certificate file is not corrupted, then import the certificate file again. Parent topic: Solving Digital Certificate Problems Cannot Import a Digital Certificate If you cannot import a digital certificate, try these solutions: • Make sure the CA-signed certificate and - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 51
options. Internet Support Visit Epson's support website at epson.com/support (U.S.), epson.ca/support (Canada), or latin.epson.com/support (Caribbean) and select your product for solutions to common problems. You can download drivers and documentation, get FAQs and troubleshooting advice, or e-mail - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 52
Parent topic: Solving Problems 52 - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 53
product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as - Epson SureColor P5370 Standard Edition | Administrator Guide - Page 54
Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Epson approved Products by Seiko Epson Corporation. This information is subject to change without notice.
![](/manual_guide/products/epson-surecolor-p5370-standard-edition-administrator-s-guide-c924826/1.png)
Administrator's Guide