Epson SureColor P700 Start Here - Installation Guide
Epson SureColor P700 Manual
 |
View all Epson SureColor P700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson SureColor P700 manual content summary:
- Epson SureColor P700 | Start Here - Installation Guide - Page 1
Epson® SureColor® P700/P900 Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online Userʼs Guide. Note: This printer is designed for use with Epson® cartridges only, not third-party cartridges or ink. For important ink - Epson SureColor P700 | Start Here - Installation Guide - Page 2
extend the rear paper feeder. 2 Shake the ink cartridges gently about 15 times, then unpack them. SureColor P700 SureColor P900 Caution: Do not touch the areas shown below. Doing so may prevent normal operation and printing. 2 Slide the edge guides all the way out. 3 Insert the cartridges - Epson SureColor P700 | Start Here - Installation Guide - Page 3
: SureColor P700: 13 inches (330 mm) SureColor P900: 16 inches (405 mm) 1 Select Paper Setting on the productʼs control panel. Install software Note: An Internet connection is required to obtain the product software. Firmware Update Notice: The printer is designed to work only with genuine Epson - Epson SureColor P700 | Start Here - Installation Guide - Page 4
professional printers and inks. Legacy Papers Designed for artists who intend to sell their prints. Legacy Papers marry the artistry of revered European papermaking with the latest advancements in inkjet coating technology. Epson SureColor P700/P900 replacement ink cartridges Color Photo Black
-
1 -
2 -
3 -
4
 |
 |
Epson
®
SureColor
®
P700/P900
Start Here
IMPORTANT:
Before using this product, make sure you read these
instructions and the safety instructions in the online
Userʼs Guide
.
Note:
This printer is designed for use with Epson
®
cartridges only, not
third-party cartridges or ink. For important ink information, visit
www.epson.com/epsonink
(U.S.) or
www.epson.ca/epsonink
(Canada) or
see your printer box.
The illustrations show the SureColor
®
P700, but the steps are the same
for the SureColor P900, unless otherwise specified.
Choose a location for the printer
Choose a location for the printer that is near a wall outlet where the
power cord can be easily unplugged. Avoid places subject to rapid
changes in temperature and humidity. Also keep the printer away from
direct sunlight, strong light, or heat sources.
Make sure the productʼs rubber feet rest completely on a sturdy surface
capable of supporting the following weight:
SureColor P700: 30 lb (13.7 kg)
SureColor P900: 35 lb (15.9 kg)
Unpack
1
Make sure you have these items:
Printer
Disc tray
Ink cartridges
Limited warranty
Power cord
Note:
±
See the online
Userʼs Guide
for instructions on using the disc tray.
±
Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
2
Remove all protective materials from the product.
3
Open the front and printer covers, and remove all protective
materials from inside the product.
Caution:
Do not touch the ink tube.
4
Close the printer and front covers.
5
Open the rear paper feeder and port cover, and remove all
protective materials.
6
Close the port cover and rear paper feeder.
Turn on
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Press the
power button.