Epson SureColor S70675 High Production Edition User Manual
Epson SureColor S70675 High Production Edition Manual
![]() |
View all Epson SureColor S70675 High Production Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson SureColor S70675 High Production Edition manual content summary:
- Epson SureColor S70675 High Production Edition | User Manual - Page 1
. Epson® SureColor® S30675 S50675 S70675 User's Guide - Epson SureColor S70675 High Production Edition | User Manual - Page 2
Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of is a registered logomark of Seiko Epson Corporation. Epson Preferred is a service mark of Epson America, Inc. General Notice: Other product names - Epson SureColor S70675 High Production Edition | User Manual - Page 3
Contents Chapter 1 Introduction Important Safety Instructions 7 Printer Parts 10 Front Section - S50675 and S70675 10 Front Section - S30675 13 Inside - S70675 and S50675 15 Inside - S30675 17 Back 18 LAN Port - Epson SureColor S70675 High Production Edition | User Manual - Page 4
Using the Auto Take-up Reel Unit 92 Removing the Take-up Roll (Using the Standard Take-up Reel 107 Removing the Take-up Roll (Using the Optional Heavy Roll Auto Take-up Reel) . . . . 108 Before Printing 110 Media Settings 111 Basic Setting Flow 111 Precautions regarding settings 111 Saving - Epson SureColor S70675 High Production Edition | User Manual - Page 5
The Network Setup Menu 213 The Preference Menu 214 The Reset All Settings Menu 214 Chapter 5 Problem Solver When a Message Is Displayed 215 When a Maintenance Call/Service Call Occurs 217 Troubleshooting 218 You Cannot Print (Because the Printer Does Not Work 218 The Printer Sounds Like It - Epson SureColor S70675 High Production Edition | User Manual - Page 6
Specifications 242 Standards and Approvals 244 FCC Compliance Statement 244 Appendix A Where To Get Help Contacting Epson Support 246 Appendix B Software License Terms Open Source Software Licenses 247 Bonjour 247 Other Software Licenses 254 Info-ZIP copyright and license 254 6 - Epson SureColor S70675 High Production Edition | User Manual - Page 7
before using the printer. Also be sure to follow all warnings and instructions marked on the printer. When choosing a place for this product ❏ Place this product on a flat, stable surface that is larger than this product. This product - Epson SureColor S70675 High Production Edition | User Manual - Page 8
objects through the slots. Take care not to spill liquid on this product. ❏ Do not attempt to service this product yourself. ❏ Unplug this product and refer servicing to qualified service personnel under the following conditions: The power cord or plug is damaged; liquid has entered the product; the - Epson SureColor S70675 High Production Edition | User Manual - Page 9
product. Note: Notes contain useful or additional information on the operation of this product. Illustrations Unless otherwise noted, the illustrations show the S30675, but the instructions in this manual apply to all three models. Introduction 9 - Epson SureColor S70675 High Production Edition | User Manual - Page 10
Available separately for the S70675. See the Additional Print Drying System Setup Guide. 3 After heater The heater can be used to rapidly dry ink "Loading and Exchanging Media" on page 38. 5 Tensioner media guide The tensioner media guide prevents the take-up roll from skewing when using the auto - Epson SureColor S70675 High Production Edition | User Manual - Page 11
the take-up roll. There are two supports: one on the left and one on the right. 9 Auto switch Use this switch to select the auto take-up direction. Choose Off to disable auto take-up. 10 Manual switch Use this switch to select the manual take-up direction.AutoThe selected option takes - Epson SureColor S70675 High Production Edition | User Manual - Page 12
22 USB port Connects the USB cable. 23 Maintenance cover (right) Open this cover when performing regular maintenance. Normally closed when using the printer. See "Cleaning Frequency" on page 129. 24 Media loading lever After loading media, lower the media loading lever to keep the media in place. - Epson SureColor S70675 High Production Edition | User Manual - Page 13
. See"Loading and Exchanging Media" on page 38. 4 Tensioner media guide The tensioner media guide prevents the take-up roll from skewing when using the auto take-up reel unit. When not using the auto take-up reel unit, move the guide out of the way toward both edges of the tensioner. 5 Tensioner The - Epson SureColor S70675 High Production Edition | User Manual - Page 14
removing the take-up roll. There are two supports: one on the left and one on the right. 8 Auto switch Use this switch to select the auto take-up direction. Choose Off to disable auto take-up. 9 Manual switch Use this switch to select the manual take-up direction. The selected option takes - Epson SureColor S70675 High Production Edition | User Manual - Page 15
the area around this unit at the end of each workday. See "Cleaning Around the Print Head (Daily)" on page 137. 2 Media holding plate (edge guide) The media holding plates prevent the media riding up and keep fibers on the cut edge of the media from touching the print head. Position - Epson SureColor S70675 High Production Edition | User Manual - Page 16
3 Cutter groove Pass the blade of a cutter (not included) down this groove to cut media. 4 Pressure rollers (high) There are ten rollers in total; the high pressure rollers are the two on the outside edges. They press down on the edges of the media when transparent or white film is used and during - Epson SureColor S70675 High Production Edition | User Manual - Page 17
is at the far left side of the printer before cleaning. See "Cleaning Around the Print Head (Daily)" on page 137. 2 Media holding plate (edge guide) The media holding plates prevent the media riding up and keeps fibers on the cut edge of the media from touching the print head. Position - Epson SureColor S70675 High Production Edition | User Manual - Page 18
7 Caps Except during printing, these caps cover the print head nozzles to prevent them from drying out. We recommend that the caps be cleaned at the end of each workday. See "Regular Cleaning" on page 137. 8 Wiper The wiper removes ink from the print head nozzles. We recommend that this unit be - Epson SureColor S70675 High Production Edition | User Manual - Page 19
the media before printing so that the print area is not subject to sudden changes in temperature. 6 Roll support Rest media on these supports before placing it on the roll holders. There are two supports: one on the left and one on the right. 7 Handle After placing media on the right roll holder - Epson SureColor S70675 High Production Edition | User Manual - Page 20
Data lamp On Flashing Control Panel Status lamp (green/red) On (red) Status The printer is connected using a 100base-TX connection. The printer is receiving data over a 100base-TX connection. 1 P button (power button) Turns the power on and off. 2 P light (power light) The printer's operational - Epson SureColor S70675 High Production Edition | User Manual - Page 21
3 M button (media setup button) Press this button to display the Media Setup menu, which contains such items as Media Remaining, Select Media, Customize Settings, and Print Media List. This button is disabled during printing. See "The Media Setup Menu" on page 203. 4 Display Displays the printer's - Epson SureColor S70675 High Production Edition | User Manual - Page 22
10 button (heating and drying button) Pressing this button displays the Heating & Drying menu, where you can adjust the Heater Temperature. If the optional additional print drying system is attached, you can also adjust Additional Dryer settings. These options can be adjusted during printing. See " - Epson SureColor S70675 High Production Edition | User Manual - Page 23
2 Heater temperature From left to right, this display shows the temperature settings for the pre-heater, platen heater, and after heater. The thermometer icons give a rough indication of the current temperatures of the heaters. : The heater has reached the selected temperature. : The heater has not - Epson SureColor S70675 High Production Edition | User Manual - Page 24
: Ink is low. You need to prepare a new ink cartridge. : The level of ink remaining has reached the limit; replace with a new cartridge. When using spot color inks, replace the ink cartridge promptly. If the old cartridge is not replaced, the print head or other parts may be damaged. : The ink - Epson SureColor S70675 High Production Edition | User Manual - Page 25
Status indicators The status of the waste ink bottle is shown as follows: : No error. The indicator changes to show the amount of space available. : The waste ink bottle is almost full. Ready a new waste ink bottle. : The waste ink bottle is full. Replace with a new waste ink bottle. 7 Media rise - Epson SureColor S70675 High Production Edition | User Manual - Page 26
inches) in width. The main features of this printer are described below. Realizing High Productivity Triple heaters The three heaters listed below support improved productivity and print quality. The pre-heater: Warms media before printing to protect the print area from sudden changes in temperature - Epson SureColor S70675 High Production Edition | User Manual - Page 27
reproduction. It is capable of print quality of a level sufficient for car wraps and indoor display advertising that can be inspected at close range. Support for white and metallic silver inks A variety of print effects are available when using the S70675 with white and metallic silver inks or the - Epson SureColor S70675 High Production Edition | User Manual - Page 28
Media rise detection The S50675 is equipped with a system for detecting media rise during printing. If the media rises during printing, printing will stop to prevent the media coming into contact with the print head. Stopping printing avoids printing errors and prevents waste of ink and media. Ease - Epson SureColor S70675 High Production Edition | User Manual - Page 29
Notes on Usage and Storage In this document, white and metallic silver ink are called "spot color ink." Installation Space Make sure that you secure the following space, clear of any other objects, so that paper ejection and consumable replacement are not obstructed. For the external dimensions of - Epson SureColor S70675 High Production Edition | User Manual - Page 30
❏ Avoid using the printer in locations with heat sources or locations that are exposed to direct drafts from ventilators or air conditioners. The print head nozzles could dry out and clog. ❏ Do not bend or tug the waste ink tube. Ink could spill inside or around the printer. ❏ Maintenance such as - Epson SureColor S70675 High Production Edition | User Manual - Page 31
Notes When Not Using the Printer If you are not using it, note the following points when storing the printer. If it is not stored correctly, you may not be able to print properly the next time it is used. Additional precautions are required for white and metallic silver inks. See "Spot Color Inks" - Epson SureColor S70675 High Production Edition | User Manual - Page 32
Handling ink cartridges Note the following points when handling ink cartridges to maintain good print quality. Additional precautions are required for white and metallic silver inks. See "Spot Color Inks" on page 35. ❏ Extra ink is required to fully charge the print head nozzles the first time the - Epson SureColor S70675 High Production Edition | User Manual - Page 33
❏ Use a cleaning stick from the supplied maintenance kit to wipe ink from the ink supply port of cartridges that have been removed from the printer before all the ink is used. Dried ink on the supply port may cause ink leaks when the cartridge is reinserted and used. While cartridges are in storage, - Epson SureColor S70675 High Production Edition | User Manual - Page 34
immediately separated and dried but will become permanent if the surfaces are not separated. ❏ Avoid direct sunlight. ❏ To prevent discoloration, display and store prints as instructed in the documentation supplied with the media. Introduction 34 - Epson SureColor S70675 High Production Edition | User Manual - Page 35
document size settings. ❏ Note that the auto take-up reel unit may not function as expected, causing a decline in print quality. ❏ Some media do not support ink layering. For details, refer to the documentation supplied with the media or contact the manufacturer. Introduction 35 - Epson SureColor S70675 High Production Edition | User Manual - Page 36
Using the Supplied Software Contents of the Software CD The following applications are available on the supplied software CD. Install as required. For information about these applications, see the on-line help for the application in question. Note: ❏ The supplied disk does not contain printer - Epson SureColor S70675 High Production Edition | User Manual - Page 37
Epson LFP Remote Panel 2, select Epson LFP Remote Panel 2. 4. Select the target printer icon, and then click OK. 5. Follow the on-screen instructions to continue. When the delete confirmation message appears, click Yes. If you are reinstalling the Epson communications driver, restart the computer - Epson SureColor S70675 High Production Edition | User Manual - Page 38
you attempt to load the media, check the following cautions beforehand. For information on the media that can be used in the printer, see "Supported Media" on page 235. c Caution: ❏ The heaters and media holding plates may be hot; observe all necessary precautions. Failure to observe the necessary - Epson SureColor S70675 High Production Edition | User Manual - Page 39
. Do not load media if its right and left edges are uneven. If the right and left edges of the roll are uneven, media feeding problems may cause the media to move around during printing. Either rewind to align the edges or use a roll without any issues. Basic Operations 39 - Epson SureColor S70675 High Production Edition | User Manual - Page 40
edge of the media must pass within the squares of 2 through 8 according to the media width. * Transparent film, white film, and ink layering are not supported for these widths. Basic Operations 40 - Epson SureColor S70675 High Production Edition | User Manual - Page 41
Pressure roller types There are two types of pressure rollers. As shown below, the pressure roller to use depends on the type of printing. ❏ For normal printing, use low pressure rollers . Note that the quantity of rollers to use depends on the media width. ❏ When transparent or white film is loaded - Epson SureColor S70675 High Production Edition | User Manual - Page 42
roll holder fixing screws sufficiently and adjust the roll holders so that the gap between the two is wider than the media. Center the roll supports between the roll holders. Basic Operations 42 - Epson SureColor S70675 High Production Edition | User Manual - Page 43
the holder forward until it stops. The media can not be properly loaded if the handle shaft is not visible. 4. Place media on the roll support oriented according to how it is rolled (see below). Printable side out Printable side in 5. Align the left and right edges of the media with - Epson SureColor S70675 High Production Edition | User Manual - Page 44
with black squares is not in place, affix the label as described in the Setup Guide. 6. Raise the lift lever on the left side of the printer to lift the has an outer diameter of less than 140 mm (5.5 inches), lift it manually and place it on the roll holder. The roll core will not reach the holder - Epson SureColor S70675 High Production Edition | User Manual - Page 45
the media into position, then firmly insert the roll holder. If the roll has an outer diameter of less than 140 mm (5.5 inches), lift it manually and place it on the roll holder. Basic Operations 45 - Epson SureColor S70675 High Production Edition | User Manual - Page 46
9. To ensure the roll holder is inserted into the roll core sufficiently, push the center section on the side of the roll holder toward the roll end twice. Important: If the roll holder is inserted into the roll core insufficiently, media will not be fed correctly during printing because of slippage - Epson SureColor S70675 High Production Edition | User Manual - Page 47
Important: If the roll holder screw is loose, the roll holder may move during printing. This could cause stripes and unevenness in the print results. 11. Rotate the handle until part A in the illustration below is fully inserted. Important: Once part A is hidden, do not turn the handle any further. - Epson SureColor S70675 High Production Edition | User Manual - Page 48
13. Insert the media approximately 30 cm (12 inches) into the opening, then lower the media loading lever. I 14. Check that the edges of the media pass within the dimensions of the square that was adjusted in step 5. Example of media with a width of 64 inches: Important: Perform steps 13 to 5 in - Epson SureColor S70675 High Production Edition | User Manual - Page 49
15. Hold the center of the media and raise the media loading lever. 16. Pull the media straight to the center of the after heater. ❏ Do not pull the media with both hands. This could cause the media to skew or move around. ❏ The labels on the after heater are not used when media is loaded. If it is - Epson SureColor S70675 High Production Edition | User Manual - Page 50
Note: To avoid getting grease on your skin, do not touch the shaft (gray part in the figure) at the top of the roller. Normal printing ❏ Use low pressure rollers. Move the high pressure rollers right or left until they contact the ends. ❏ We recommend setting the low pressure rollers within 5 mm (0. - Epson SureColor S70675 High Production Edition | User Manual - Page 51
18. When the media loading lever is lowered, the pressure rollers set at the black square labels secure the media. 19. Position the media holding plates at both sides of the media. Basic Operations 51 - Epson SureColor S70675 High Production Edition | User Manual - Page 52
While holding the tabs on both sides, move the plates to the edges of the media. Adjust so that both edges of the media are aligned to the center of the row of round holes in the plates. Important: ❏ Do not use the media holding plates with media that is more than 0.4 mm (0.02 inch) thick. The media - Epson SureColor S70675 High Production Edition | User Manual - Page 53
20. Close the front cover. When using the auto take-up reel, see "Using the Auto Take-up Reel Unit" on page 92. When not using the auto take-up reel, proceed to check the media and change settings. See "Viewing and Changing Media Settings" on page 85. Using the optional heavy roll media feeding unit - Epson SureColor S70675 High Production Edition | User Manual - Page 54
Important: If the media holding plates are not moved out of the way, media insertion may fail or damage may occur to the edge of the media. Hold the tabs on the media holding plates and move the plates to the right and left sides of the platen. 3. Loosen the left and right roll holder fixing screws - Epson SureColor S70675 High Production Edition | User Manual - Page 55
Media (S70675, S50675)" on page 40. Note: If the label with black squares is not in place, affix the label as described in the Setup Guide. 6. Align the media and the roll holders. Basic Operations 55 - Epson SureColor S70675 High Production Edition | User Manual - Page 56
Raise or lower the lifter until the media roll core is level with the roll holders. 7. Fully insert the left roll holder. Next, tighten the roll holder screw until the screw no longer turns to fix the roll holder in place. Basic Operations 56 - Epson SureColor S70675 High Production Edition | User Manual - Page 57
8. Fully insert the right roll holder. 9. To ensure the roll holder is inserted into the roll core sufficiently, push the center section on the side of the roll holder towards the roll end twice. Important: If the roll holder is inserted into the roll core insufficiently, media is not fed correctly - Epson SureColor S70675 High Production Edition | User Manual - Page 58
10. Tighten the roll holder screw until the screw no longer turns to fix the roll holder in place. Important: If the roll holder screw is loose, the roll holder may move during printing. This could cause stripes and unevenness in the print results. 11. Remove the lifter. Basic Operations 58 - Epson SureColor S70675 High Production Edition | User Manual - Page 59
12. Rotate the handle until part A in the illustration below is fully inserted. Important: Once part A is hidden, do not turn the handle any further. Failure to observe this precaution could damage the roll holder. If part A is still visible even after the handle has been fully turned, rewind the - Epson SureColor S70675 High Production Edition | User Manual - Page 60
14. Insert the media approximately 30 cm (12 inches) into the opening, then lower the media loading lever. 15. Check that the edges of the media pass within the dimensions of the square that was adjusted in step 5. Example of setting media with a width of 64 inches: Important: Perform Steps 14 to 5 - Epson SureColor S70675 High Production Edition | User Manual - Page 61
16. Hold the center of the media and raise the media loading lever. 17. Pull the media straight to the center of the after heater. ❏ Do not pull the media with both hands. This could cause the media to skew or move around. ❏ The labels on the after heater are not used when media is loaded. If it is - Epson SureColor S70675 High Production Edition | User Manual - Page 62
Note: To avoid getting grease on your skin, do not touch the shaft (gray part in the figure) at the top of the roller. Normal printing ❏ Use low pressure rollers. Move the high pressure rollers to the right or left until they contact the ends. ❏ We recommend setting the low pressure rollers within 5 - Epson SureColor S70675 High Production Edition | User Manual - Page 63
When transparent or white film is loaded or during ink layering ❏ Use high pressure rollers only. ❏ We recommend positioning the rollers within 10 mm (0.39 inch) from the left and right edges of the media. ❏ Position the low pressure rollers away from the black square labels. 19. When the media - Epson SureColor S70675 High Production Edition | User Manual - Page 64
While holding the tabs on both sides, move the plates to the edges of the media. Adjust so that both edges of the media are aligned to the center of the round holes in the plates. Important: ❏ Do not use the media holding plates with media that is more than 0.4 mm (0.02 inch) thick. The media - Epson SureColor S70675 High Production Edition | User Manual - Page 65
21. Close the front cover. When using the auto take-up reel, see "Using the Auto Take-up Reel Unit" on page 92. When not using the auto take-up reel, proceed to check the media and change settings. See "Viewing and Changing Media Settings" on page 85. Loading Media - S30675 Follow the steps below - Epson SureColor S70675 High Production Edition | User Manual - Page 66
roll holder fixing screws sufficiently and adjust the roll holders so that the gap between the two is wider than the media. Center the roll supports between the roll holders. Important: If the right holder handle shaft is not visible, rotate the holder forward until it stops. The media can not - Epson SureColor S70675 High Production Edition | User Manual - Page 67
, mark it on the label as instructed in the Setup Guide. 6. Raise the lift lever on the left side of the printer to lift the media into position, then firmly insert the roll holder. If the roll has an outer diameter of less than 140 mm (5.5 inches), lift it manually - Epson SureColor S70675 High Production Edition | User Manual - Page 68
the media into position, then firmly insert the roll holder. If the roll has an outer diameter of less than 140 mm (5.5 inches), lift it manually and place it on the roll holder. Basic Operations 68 - Epson SureColor S70675 High Production Edition | User Manual - Page 69
9. To ensure the roll holder is inserted into the roll core sufficiently, push the center section on the side of the roll holder towards the roll end twice. Important: If the roll holder is inserted into the roll core insufficiently, media will not feed correctly during printing because of slippage - Epson SureColor S70675 High Production Edition | User Manual - Page 70
Important: If the roll holder screw is loose, the roll holder may move during printing. This could cause stripes and unevenness in the print results. 11. Rotate the handle until part A in the illustration below is fully inserted. Important: Once part A is hidden, do not turn the handle any further. - Epson SureColor S70675 High Production Edition | User Manual - Page 71
13. Insert the media approximately 30 cm (12 inches) into the opening, then lower the media loading lever. 14. Confirm that the left edge of the media passes over the center of the square in the label on the pre-heater. Basic Operations 71 - Epson SureColor S70675 High Production Edition | User Manual - Page 72
Important: Perform Steps 13 to 5 in reverse order and repeat the loading process if the left edge of the media is not within the guides. Do not attempt to reposition the roll holders while they are inserted in the media. 15. Hold the center of the media and raise the - Epson SureColor S70675 High Production Edition | User Manual - Page 73
❏ The labels on the after heater are not used when media is loaded. If it is adjusted too forcefully, the media may move around or become loose. 17. Lower the media loading lever to hold the media in place. 18. Position the media holding plates at both sides of the media. Basic Operations 73 - Epson SureColor S70675 High Production Edition | User Manual - Page 74
While holding the tabs on both sides, move the plates to the edges of the media. Adjust so that the edges of the media are aligned to the center of the round holes in the plates. Important: ❏ Do not use the media holding plates with media that is more than 0.4 mm (0.02 inch) thick. The media holding - Epson SureColor S70675 High Production Edition | User Manual - Page 75
19. Close the front cover. When using the auto take-up reel, see "Using the Auto Take-up Reel Unit" on page 92. When not using the auto take-up reel, proceed to check the media and change settings. See "Viewing and Changing Media Settings" on page 85. Using the optional heavy roll media feeding unit - Epson SureColor S70675 High Production Edition | User Manual - Page 76
Hold the tabs on the media holding plates and move the plates to the right and left sides of the platen. 3. Loosen the left and right roll holder fixing screws and adjust the roll holders so that the gap between the two is wider than the media. Important: If the right holder handle shaft is not - Epson SureColor S70675 High Production Edition | User Manual - Page 77
the media matches the set position on the label. If the label does not have the loading position, mark it on the label as instructed in the Setup Guide. 5. Align the media and the roll holders. Raise or lower the lifter until the media roll core is level with the roll holders - Epson SureColor S70675 High Production Edition | User Manual - Page 78
6. Fully insert the left roll holder. Next, tighten the roll holder screw until the screw no longer turns to fix the roll holder in place. 7. Fully insert the right roll holder. Basic Operations 78 - Epson SureColor S70675 High Production Edition | User Manual - Page 79
8. To ensure the roll holder is inserted into the roll core sufficiently, push the center section on the side of the roll holder towards the roll end twice. Important: If the roll holder is inserted into the roll core insufficiently, media will not feed correctly during printing because of slippage - Epson SureColor S70675 High Production Edition | User Manual - Page 80
9. Tighten the roll holder screw until the screw no longer turns to fix the roll holder in place. Important: If the roll holder screw is loose, the roll holder may move during printing. This could cause stripes and unevenness in the print results. 10. Remove the lifter. Basic Operations 80 - Epson SureColor S70675 High Production Edition | User Manual - Page 81
11. Rotate the handle until part A in the illustration below is fully inserted. Important: Once part A is hidden, do not turn the handle any further. Failure to observe this precaution could damage the roll holder. If part A is still visible even after the handle has been turned fully, rewind the - Epson SureColor S70675 High Production Edition | User Manual - Page 82
-heater. Important: Perform Steps 13 to 4 in reverse order and repeat the loading process if the left edge of the media is not within the guides. Do not attempt to reposition the roll holders while they are inserted in the media. Basic Operations 82 - Epson SureColor S70675 High Production Edition | User Manual - Page 83
15. Hold the center of the media and raise the media loading lever. 16. Pull the media straight to the center of the after heater. ❏ Do not pull the media with both hands. This could cause the media to skew or move around. ❏ The labels on the after heater are not used when media is loaded. If it is - Epson SureColor S70675 High Production Edition | User Manual - Page 84
17. Lower the media loading lever to hold the media in place. 18. Position the media holding plates at both sides of the media. While holding the tabs on both sides, move the plates to the edges of the media. Adjust so that both edges of the media are aligned with the center of the round holes in - Epson SureColor S70675 High Production Edition | User Manual - Page 85
Important: ❏ Do not use the media holding plates with media that is more than 0.4 mm (0.02 inch) thick. The media holding plates could touch and damage the print head. ❏ Always position the plates so that the edges of the media are at the centers of the round holes. Incorrect positioning causes - Epson SureColor S70675 High Production Edition | User Manual - Page 86
On: The printer displays the amount of media remaining. Off: The printer does not display the amount of media remaining. When Remaining Setup is On, the printer will calculate the approximate amount of media remaining based on the length of the roll and the amount used for printing and display this - Epson SureColor S70675 High Production Edition | User Manual - Page 87
4. Press the y button to display the dialog shown in Step 2 and then press the y button again. 5. After confirming that the settings are correct, use the d/u buttons to select Keep Settings Above and press the Z button. 6. When the roll type selection screen appears, use the d/u buttons to select - Epson SureColor S70675 High Production Edition | User Manual - Page 88
The following section describes how to print the amount of media remaining. 1. Confirm that the printer is ready to print. 2. Press the M button, select Media Remaining in the menu, and press the Z button. 3. Select Print Remaining Length and press the Z button. 4. Press the Z button to print the - Epson SureColor S70675 High Production Edition | User Manual - Page 89
c Caution: The heaters and media holding plate may be hot; observe all necessary precautions. Failure to observe the necessary precautions could result in burns. When cutting media, be careful not to cut your fingers or hands with the cutter or other blades. 1. After checking that the printer is - Epson SureColor S70675 High Production Edition | User Manual - Page 90
When the auto take-up reel unit is used, raise the tensioner. 3. Open the front cover, and move the media holding plates out of the way. Hold the tabs and move the plates to the right and left sides of the platen. 4. Cut the media with the cutter. Pass the blade of the cutter down the cutting groove - Epson SureColor S70675 High Production Edition | User Manual - Page 91
unit is used, proceed to Step 5. Otherwise, proceed to Step 7. 5. Set the Auto switch to off. Take up the cut media completely by operating the Manual switch according to how the media is rolled. 6. Remove the take-up roll. See "Removing the Take-up Roll (Using the Standard Take-up Reel - Epson SureColor S70675 High Production Edition | User Manual - Page 92
with the printed side facing out" on page 97, or "Take up with the printed side facing in" on page 102. c Caution: ❏ Follow the instructions in the manual when loading media or roll cores or removing the take-up roll. Dropping media, roll cores, or take-up rolls could result in injury - Epson SureColor S70675 High Production Edition | User Manual - Page 93
❏ Attach media to the roll core using the paper tape supplied. Using the paper tape reduces take-up roll misalignment errors. When the tape has been completely used, purchase commercially available paper tape (that is not easily stretched or cut) with a width of 20 to 25 mm (about one inch). ❏ For - Epson SureColor S70675 High Production Edition | User Manual - Page 94
Center the roll supports between the roll holders. 3. Align the right roll core holder with the right edge of the media and tighten the fixing screw. 4. Cut the left and right corners of the media edges as shown below. Basic Operations 94 - Epson SureColor S70675 High Production Edition | User Manual - Page 95
Cutting the media prevents feeding problems, such as the left and right corners of media being folded and caught at the start of take-up. This process also allows the media - Epson SureColor S70675 High Production Edition | User Manual - Page 96
❏ When using the standard roll media system, push the holder until part A shown in the illustration below is fully inserted, and tighten the screw. Important: Stop when part A is no longer visible. The take-up reel unit may not function as expected if the holder is inserted too far. ❏ When using the - Epson SureColor S70675 High Production Edition | User Manual - Page 97
Important: Once part A is hidden, do not turn the handle any further. Failure to observe this precaution could damage the roll core holder. If part A is still visible even after the handle has been turned fully, rewind the handle. Then loosen the left roll core holder fixing screw and reattach the - Epson SureColor S70675 High Production Edition | User Manual - Page 98
3. Turn the paper tape over from the front of the roll core, and stick using adhesive tape. Important Attach the media to the take up roll core with the media in a taut state. If media is loose, it may move around during take-up. 4. Flip the Auto switch to . Basic Operations 98 - Epson SureColor S70675 High Production Edition | User Manual - Page 99
5. Lower the tensioner until it slightly touches the paper tape. 6. Continue holding down the d button until both edges of the media reach the paper core and wrap around once or twice. Basic Operations 99 - Epson SureColor S70675 High Production Edition | User Manual - Page 100
7. Position the right and left tensioner media guides until they slightly touch the media. 8. When loading banner media, attach three counter weights to both ends of the tensioners. Basic Operations 100 - Epson SureColor S70675 High Production Edition | User Manual - Page 101
Important: ❏ Always attach three each on the left and right. Take-up will not be performed correctly if counterweights are added to one side only or the quantities are different on the left and right. ❏ For media other than banner media, always remove the counterweights before printing. Failure to - Epson SureColor S70675 High Production Edition | User Manual - Page 102
Take up with the printed side facing in 1. Cut the paper tape approximately 60 cm (12 inches) in length, and paste it approximately in the center of the media using adhesive tape. 2. Hold down the u button until the tip of the tape reaches the center of the pipe. 3. Turn the paper tape over from the - Epson SureColor S70675 High Production Edition | User Manual - Page 103
Important: Attach the media to the take up roll core with the media in a taut state. If media is loose, it may move around during take-up. 4. Flip the Auto switch to . 5. Lower the tensioner until it slightly touches the paper tape. Basic Operations 103 - Epson SureColor S70675 High Production Edition | User Manual - Page 104
6. Continue holding down the d button until both edges of the media have wrapped around once or twice. 7. Position the right and left tensioner media guides until they slightly touch the media. Basic Operations 104 - Epson SureColor S70675 High Production Edition | User Manual - Page 105
8. When loading banner media, attach three counter weights to both ends of the tensioners. Basic Operations 105 - Epson SureColor S70675 High Production Edition | User Manual - Page 106
Important: ❏ Always attach three each on the left and right. Take-up will not be performed correctly if counterweights are added to one side only or the quantities are different on the left and right. ❏ For media other than banner media, always remove the counterweights before printing. Failure to - Epson SureColor S70675 High Production Edition | User Manual - Page 107
or removing the media, use at least two persons. Follow the instructions in the manual when loading media or roll cores or removing media from the take-up " on page 88. 2. To prevent the media from sliding off the roll, support the roll at its left end. 3. Loosen the left roll core holder fixing - Epson SureColor S70675 High Production Edition | User Manual - Page 108
roll core holder from the roll. 7. Lower the roll onto the roll support. Removing the Take-up Roll (Using the Optional Heavy Roll Auto Take- handling media that is 40 kg (88 lb) or heavier. Follow the instructions in the manual when loading media or roll cores or removing media from the take-up roll - Epson SureColor S70675 High Production Edition | User Manual - Page 109
reel. See "Cutting media" on page 88. 2. Insert the lifter between the media and the auto take-up reel unit and adjust the height to support the take-up roll. 3. Loosen the left roll core holder fixing screw and remove the roll core holder from the roll. 4. Loosen the right roll - Epson SureColor S70675 High Production Edition | User Manual - Page 110
Before Printing To maintain print quality, perform the following inspection before starting work each day. ❏ Check the amount of ink remaining. If ink is expended during printing, printing can be resumed once the affected cartridge has been replaced. However, when replacing ink during a print job, - Epson SureColor S70675 High Production Edition | User Manual - Page 111
, Media Tension, etc.) During general use, follow the flow below to configure settings. However, for some types of media, you need to manually configure Media Adjust in Step (2) or change the values specified in Advanced Settings. See "Recommended Media Settings" on page 238 and "Customize Settings - Epson SureColor S70675 High Production Edition | User Manual - Page 112
❏ When using the same type of media with different lots, you should reconfigure media settings. ❏ When using the S70675 or S50675, do not use the media part that has been fed and rewound for adjustment. Media that has been fed and then rewound may have traces or other issues from rollers and it may - Epson SureColor S70675 High Production Edition | User Manual - Page 113
Nozzles are clogged. Perform Head Cleaning to remove any clogs. ❏ In the following cases, Auto Media Adjust is not available. In Media Adjust, execute the manual menu for each item. ❏ The media is transparent or colored. ❏ Platen Gap is set to 2.5. ❏ After Auto Media Adjust is performed, banding or - Epson SureColor S70675 High Production Edition | User Manual - Page 114
The approximate maximum length of the media required to print the test pattern is given below. The amount of media used varies with the printer model and the media system used. S70675, S50675 Standard roll media system Heavy Roll Media System Approx. 987 mm Approx. 1116 mm S30675 Standard roll - Epson SureColor S70675 High Production Edition | User Manual - Page 115
You can set the temperatures of the pre-heater, platen heater, and after heater. Note: Adjust standard heater temperatures as follows: ❏ Set the heaters to the temperatures recommended in the documentation provided with the media, if available. ❏ Raise the temperature if the print results are - Epson SureColor S70675 High Production Edition | User Manual - Page 116
Alignment - Standard (Auto) in this menu. However, if the setting value is changed to 2.5, auto adjustment becomes unavailable. Perform Standard (Manual). Change the setting values of the following items before executing this menu: ❏ Platen Gap ❏ Advanced Settings See "Customize Settings" on page - Epson SureColor S70675 High Production Edition | User Manual - Page 117
Approx. 1170 mm Approx. 1170 mm S30675 Standard roll media system Heavy Roll Media System Auto Approx. 1061 mm Approx. 1190 mm Manual Approx. 1170 mm Approx. 1170 mm When making Feed Adjustments, see "Precautions regarding settings" on page 111. 1. Check that the printer is ready, and load - Epson SureColor S70675 High Production Edition | User Manual - Page 118
This mode automatically performs pattern printing and adjustment. When Ready is displayed on the screen of the control panel, adjustment is completed. ❏ Manual: The adjustment pattern selection screen is displayed. Select the adjustment pattern to be printed, and press the Z button twice to proceed - Epson SureColor S70675 High Production Edition | User Manual - Page 119
Standard (Auto): The printer reads adjustment patterns using the sensor while printing the patterns, and makes adjustments automatically. ❏ Standard (Manual): Visually check the printed adjustment patterns, and specify the optimal adjustment values. Use this if graininess or misalignment occurs when - Epson SureColor S70675 High Production Edition | User Manual - Page 120
any menu, and press the Z button twice to proceed to Step 9. 9. Check the printed adjustment pattern. Select "2" in the cases shown below: In Standard (Manual) In Block pattern C1 1 2 3 10. When the screen to enter a numeric value is displayed, use the u/d buttons to enter the pattern number - Epson SureColor S70675 High Production Edition | User Manual - Page 121
11. When multiple check patterns have been printed, select the number per check pattern, and then press the Z button. The media setup menu will be displayed when you enter the pattern number for the last color. Changing Settings During Printing Heating & Drying and Feed Adjustment can be changed - Epson SureColor S70675 High Production Edition | User Manual - Page 122
Note: The time needed for the heaters to reach the specified temperatures varies with the ambient temperature. Feed Adjustment 1. Press the button during printing. The current adjustment value is displayed. 2. Use the d/u buttons to change the current value. If the feed amount is too small, black - Epson SureColor S70675 High Production Edition | User Manual - Page 123
Note: If the setting is changed, the icon is displayed on the control panel screen as shown below. To clear this icon, carry out the following operations. ❏ Re-execute Auto Media Adjust or Feed Adjustment. ❏ Execute Restore Settings. Printable area - S70675/S50675 The printable area depends on - Epson SureColor S70675 High Production Edition | User Manual - Page 124
1 to 4 indicates the margins on all four sides. Margin Position 1 Bottom1 2 Top1 3 Left2, 3 4 Right2, 3 Explanation This can be configured in a RIP. If the settings are outside the available range, they are changed to 5 mm and 17 mm (0.2 to 0.7 inch) respectively to maintain media feeding accuracy - Epson SureColor S70675 High Production Edition | User Manual - Page 125
Using high pressure rollers When high pressure rollers are used for transparent or white film or ink layering, the printable area is the area excluding the margins configured from the positioning of the pressure rollers. (See the gray area in the illustration below.) The arrow indicates the feed - Epson SureColor S70675 High Production Edition | User Manual - Page 126
1 The configured margin and the actual print results may differ depending on the RIP being used. Contact the RIP manufacturer for more information. 2 This may be available in the RIP depending on the software RIP being used. Contact the RIP manufacturer for more information. 3 Note the following - Epson SureColor S70675 High Production Edition | User Manual - Page 127
* When Media Size Check is set to Off, this is 1,626 mm (64 inches) regardless of the width of the loaded media. 1 to 4 indicates the margins on all four sides. Margin Position 1 Bottom1 2 Top1 3 Left2, 3 4 Right2, 3 Explanation This can be configured in a RIP. If the settings are outside the - Epson SureColor S70675 High Production Edition | User Manual - Page 128
3 Note the following points when setting margins: Leave margins of 10 mm (0.4 inch) or more when using media holding plates. Narrower margins could result in printer printing over the plates. If the total of the print data width and set left and right margins exceeds the printable area, a portion of - Epson SureColor S70675 High Production Edition | User Manual - Page 129
frequency listed on the following page. If cleaning is neglected, and the printer is used with ink stains, lint, and dust attached, the following trouble may occur. ❏ Ink drops from lint or dust on the nozzle surface of the print head. ❏ Clogged nozzles during printing. ❏ Nozzle clogs that cannot - Epson SureColor S70675 High Production Edition | User Manual - Page 130
When to perform At least once a day If maintenance is not performed, ink hardens and is difficult to remove. Daily Daily Daily Component to be cleaned Around the print head See "Cleaning Around the Print Head (Daily)" on page 137. Around the caps (wiper (rubber part), caps, wiper cleaner, wiper - Epson SureColor S70675 High Production Edition | User Manual - Page 131
control panel screen: Apply secondary carriage rod grease. See manual. Procedure Shaking ink cartridges (spot color) See "Shaking cartridges are clogged, see "Horizontal stripes or tint unevenness (banding)" in "Problem Solver" for other solutions. See "Horizontal lines or tint unevenness (banding - Epson SureColor S70675 High Production Edition | User Manual - Page 132
Preparing for Cleaning The following sections list the cleaning supplies you will need and describe how to use them. What You'll Need Ready the following items before beginning cleaning and replacement: ❏ Protective goggles (not included) Protects your eyes from ink and ink cleaner. ❏ Mask (not - Epson SureColor S70675 High Production Edition | User Manual - Page 133
❏ Ink cleaner (supplied with printer) Use for ink stains. See "Using Ink Cleaner" on page 136. ❏ The metal tray that came with the printer Used cleaning sticks and wiper, wiper cleaner, and flushing pads taken from the printer can be placed here. Important: If placed on the printer, used cleaning - Epson SureColor S70675 High Production Edition | User Manual - Page 134
fluid enters your eyes, rinse immediately with water. Failure to observe this precaution could result in bloodshot eyes or mild inflammation. If problems persist, consult with a physician. ❏ If fluid enters your mouth, consult a physician immediately. ❏ If fluid is swallowed, do not force the person - Epson SureColor S70675 High Production Edition | User Manual - Page 135
position the print head for part cleaning. Important: Be sure to follow the steps below when positioning the print head. Moving the print head manually could cause malfunction. 1. Confirm that the printer is ready and press #. The Maintenance menu is displayed. 2. Use the d/u buttons to select Head - Epson SureColor S70675 High Production Edition | User Manual - Page 136
Note: The alarm sounds 10 minutes after the print head is moved (default setting). Press the Z button to continue the cleaning process. After 10 more minutes have passed, the alarm sounds again. Using Ink Cleaner Use ink cleaner to clean around the print head, around the caps, and the flushing pad - Epson SureColor S70675 High Production Edition | User Manual - Page 137
Do not allow ink cleaner to drip from the cleaning stick. When dampening a clean-room wipe with ink cleaner, use cleaner poured into the cup. Important: ❏ Do not reuse ink cleaner. Using dirty ink cleaner will make staining worse. ❏ Used ink cleaner, cleaning sticks, and clean room wipes are - Epson SureColor S70675 High Production Edition | User Manual - Page 138
2. After the print head moves to the left end of the printer, open the left maintenance cover. 3. Dampen a new cleaning stick with the ink cleaner. See "Using Ink Cleaner" on page 136. Important: ❏ Rinse the cleaning stick using ink cleaner for each step. ❏ After removing a clot of ink, wipe the - Epson SureColor S70675 High Production Edition | User Manual - Page 139
Right-hand print head on the S30675, S70675, and S50675: Left-hand print head on the S70675 and S50675: Ink tends to adhere to the areas indicated by the arrows, so be sure to wipe off any ink found. If any lint or dust is caught, hook it using the tip of a cleaning stick. 5. Apply ink cleaner to - Epson SureColor S70675 High Production Edition | User Manual - Page 140
Important: When applying ink cleaner, make sure you do not press too hard on the nozzles (parts indicated by shown below). Also, make sure you move the cleaning stick in one direction; do not move it back and forth. 6. Dampen a new clean-room wipe with the ink cleaner, then wipe away any dust and - Epson SureColor S70675 High Production Edition | User Manual - Page 141
Important: Do not move the cleaning wiper back and forth. Otherwise, the print head may be damaged. Before cleaning: After cleaning: Dried and adhered ink, lint, and dust are cleanly removed. If any ink, lint, or dust remain, repeat steps 6 and 7. Maintenance 141 - Epson SureColor S70675 High Production Edition | User Manual - Page 142
Important: If stains are wiped off while the surface of the print head remains dried, the print head may be damaged. If the surface is dried, return to Step 5 to apply ink cleaner. 8. Wipe stains off the cleaning wiper and store it in a location away from direct sunlight. 9. Close the left - Epson SureColor S70675 High Production Edition | User Manual - Page 143
4. Clean the front and back of the rubber on the wiper with a cleaning stick. For S70675 and S50675, clean the other wipers in the same way. Next, proceed to the cap cleaning procedure. Cleaning caps (daily) For the S70675 and S50675, clean both of the caps. Maintenance 143 - Epson SureColor S70675 High Production Edition | User Manual - Page 144
Important: Do not push strongly against the edges or the surrounding area of the cap, or touch the inner side of the cap with a cleaning stick or tweezers. The part may be deformed, and it may no longer be possible to perform capping correctly. 1. Dampen the cleaning stick with ink cleaner. See " - Epson SureColor S70675 High Production Edition | User Manual - Page 145
the caps. 3. Hold the cleaning stick in a perpendicular orientation, and wipe the outer areas of all the caps. If ink adheres as a film to the guide section in front of and behind the caps, and lint adheres to the inside of the cap, see the next section. If nothing adheres to - Epson SureColor S70675 High Production Edition | User Manual - Page 146
amount of dirt. When you have finished, proceed to "Cleaning the wiper cleaner and wiper rail (daily)" on page 148. When ink adheres to the guide section 1. Dampen the cleaning stick with ink cleaner. See "Using Ink Cleaner" on page 136. 2. Apply ink cleaner to the - Epson SureColor S70675 High Production Edition | User Manual - Page 147
If a film-like layer of adhered ink cannot be removed completely using a cleaning stick, remove it using tweezers. Maintenance 147 - Epson SureColor S70675 High Production Edition | User Manual - Page 148
When there is lint or dust in the cap Remove using the tip of the cleaning stick or tweezers. Cleaning the wiper cleaner and wiper rail (daily) 1. Press the Z button in the control panel and confirm that the wiper has moved to the back. Maintenance 148 - Epson SureColor S70675 High Production Edition | User Manual - Page 149
face down, and check that no lint or dust has attached to the rear side. Otherwise, proceed to Step 5. Attached ink does not present any problems, however, if a film of ink has adhered around the part circled in the photo below, you should replace the wiper cleaner with a new one. See - Epson SureColor S70675 High Production Edition | User Manual - Page 150
4. Remove lint or dust that has adhered to the bottom surface of the wiper cleaner using tweezers. 5. Dampen the cleaning stick with ink cleaner. See "Using Ink Cleaner" on page 136. 6. Wipe off any ink that has become attached to the top, right, and left sides of the wiper rail. Top side: - Epson SureColor S70675 High Production Edition | User Manual - Page 151
Right and left sides: 7. Attach the wiper cleaner. Place the wiper cleaner on the attachment point and press down until you hear a click. Maintenance 151 - Epson SureColor S70675 High Production Edition | User Manual - Page 152
On the S70675 and S50675, clean the other wiper cleaner and wiper rail in the same way. 8. After cleaning, close the right maintenance cover and press the Z button. The menus will close when the print head returns to its normal position. To continue printing, perform a Nozzle Check. See "Checking - Epson SureColor S70675 High Production Edition | User Manual - Page 153
4. Press the front and rear side of the rubber part of the wiper against the clean-room wiper, then wipe off any adhered ink clots, lint, and dust. If the wiper part has split off or is broken, we recommend replacing it with a new one. See "Replacing the Wiper and Wiper Cleaner" on page 168. 5. - Epson SureColor S70675 High Production Edition | User Manual - Page 154
6. Using the cleaning stick, wipe off any ink that has hardened at the bottom of the wiper. 7. Wipe off any ink that has hardened at the wiper attachment point with the cleaning stick. 8. When you have finished cleaning, place the wiper on the attachment point and press it down until it clicks into - Epson SureColor S70675 High Production Edition | User Manual - Page 155
For the S70675 and S50675, clean the other wiper cleaner and wiper rail in the same manner. Next, proceed to the cap cleaning procedure. See "Cleaning Around the Caps (Daily)" on page 142. Cleaning Inside the Printer (Daily) Lint, dust, and ink accumulate on the platen heater, pressure rollers, and - Epson SureColor S70675 High Production Edition | User Manual - Page 156
Cleaning inside the S70675 and S50675 Wipe while rotating the roller sections one by one. Important: Ensure the cloth does not touch the shaft above the rollers (gray area in the illustration) when wiping. Otherwise, grease will adhere to the cloth. If a stained cloth touches the roller, the roller - Epson SureColor S70675 High Production Edition | User Manual - Page 157
Important: Do not press strongly on the rollers when wiping. This may detach the rollers. 6. Wipe lint, dust, and adhered ink using a brush or soft cloth that has been soaked in water and squeezed out. Carefully remove lint and dust stuck in the groove of the platen. Maintenance 157 - Epson SureColor S70675 High Production Edition | User Manual - Page 158
7. Wipe off the media holding plates using a soft cloth that has been soaked in water. Important: When media with glue has been used, wipe away glue using a diluted neutral detergent. If glue from the media adheres to the rear side of the plates, it may result in the print head striking during - Epson SureColor S70675 High Production Edition | User Manual - Page 159
Wipe lint and dust with a brush or soft cloth that has been soaked in water and squeezed well. 9. After cleaning, close the front cover and left maintenance cover. Cleaning the Flushing Pad (Daily) If lint or dust adhere to the surface of the flushing pad, it may contact the print head and clog - Epson SureColor S70675 High Production Edition | User Manual - Page 160
1. Position the print head for maintenance. See "Moving the Print Head" on page 135. 2. Dampen a new cleaning stick with ink cleaner. See "Using Ink Cleaner" on page 136. 3. Clean the top surface of the flushing pad. Wipe lint and dust with the tip of a cleaning stick. Important: Do not deform the - Epson SureColor S70675 High Production Edition | User Manual - Page 161
Cleaning the Sides of the Auto Take-up Reel Unit (Daily) White powdered stains may have been created due to rubbing between the tensioner and side plate of the auto take-up reel unit. If stains are not removed, it causes a tensioner malfunction, and it may result in a take-up failure. If stains are - Epson SureColor S70675 High Production Edition | User Manual - Page 162
Regular Cleaning Check Sheet When to perform Component to be cleaned Cleaned on date Daily (at the end of every workday) 1. Around the Print Head / / / / / If maintenance is not performed, See "Cleaning Around the Print Head / / / / / ink hardens and is difficult to (Daily)" on page - Epson SureColor S70675 High Production Edition | User Manual - Page 163
Replacing Consumables Replacing and Shaking Ink Cartridges Shaking cartridges As shown in the illustration, hold the cartridge horizontally and shake it in both directions about 5 cm (2 inches) 15 times in 5 seconds. For spot color inks and Orange Plus ink, when replacing the cartridges, shake them - Epson SureColor S70675 High Production Edition | User Manual - Page 164
printer behavior. Information about non-genuine ink levels may not be displayed, and use of non-genuine ink is recorded for possible use in service support. 1. Make sure the printer is on. 2. Lift the lock lever for the cartridge you intend to replace. 3. Insert a finger into the depression on the - Epson SureColor S70675 High Production Edition | User Manual - Page 165
Hold the cartridge horizontally and shake it in both directions about 5 cm (2 inches) 15 times in 5 seconds. For spot color inks and Orange Plus ink, when replacing the cartridges, shake them about 50 times in 15 seconds. 4. Match the color of the cartridge to the color of the label on the printer - Epson SureColor S70675 High Production Edition | User Manual - Page 166
uses the waste ink counter to track waste ink and displays a message when the counter reaches the warning level. If you follow the message instructions and replace the waste ink bottle, the waste ink counter is cleared automatically. If you replace the waste ink bottle before being prompted by - Epson SureColor S70675 High Production Edition | User Manual - Page 167
Replacing the waste ink bottle 1. Remove the waste ink bottle from the waste ink bottle holder. 2. Insert the waste ink tube into the mouth of the new waste ink bottle and place the waste ink bottle in the holder. Tightly seal the lid on the used waste ink bottle. Important: You will need the lid - Epson SureColor S70675 High Production Edition | User Manual - Page 168
4. Check again to confirm that a fresh waste ink bottle is correctly placed and then press the Z button to reset the waste ink counter. Important: Be sure to confirm that the waste ink tube is inserted in the mouth of the waste ink bottle. Ink will spill onto the surrounding area if the tube is not - Epson SureColor S70675 High Production Edition | User Manual - Page 169
Grasp the cleaner as shown and lift it from the printer. 4. Insert a new wiper cleaner. Maintenance 169 - Epson SureColor S70675 High Production Edition | User Manual - Page 170
Place it on the attachment point and press down until you hear a click. 5. Remove the wiper. Maintenance 170 - Epson SureColor S70675 High Production Edition | User Manual - Page 171
Holding the wiper by the attachment point, tilt it to the left and lift it out. 6. Insert the new wiper. Place it on the attachment point and press down until you hear a click. Users of the S70675 or S50675 will need to return to Step 2 and replace the remaining wiper. 7. Close the maintenance cover - Epson SureColor S70675 High Production Edition | User Manual - Page 172
For disposal of used wipers and wiper cleaners, see "Disposal of Used Consumables" on page 179. Replacing the Flushing Pad Before starting this procedure, be sure to read "Maintenance Precautions" on page 134. 1. Position the print head for maintenance. See "Moving the Print Head" on page 135. 2. - Epson SureColor S70675 High Production Edition | User Manual - Page 173
Wait until ink stops dripping from the bottom of the flushing pad. Remove the pad and place it on the metal tray. Important: Leave the used flushing pad that has been removed on the metal tray until it is disposed of. If such a part is directly placed on the printer, it may leave stains that may be - Epson SureColor S70675 High Production Edition | User Manual - Page 174
Insert the two hooks on the flushing pad into the slots as shown and press the tab down until the pad clicks into place. 5. Close the maintenance cover. Then close the setup menu. If the Z button is pressed once, the wiper moves to the inner side. If the Z button is pressed again, the print head - Epson SureColor S70675 High Production Edition | User Manual - Page 175
While holding the tabs of the media holding plate on both sides, move the plate to the left edge of the platen. Important: Be sure to remove the media holding plate from the left edge of the platen. If the plate is removed from the right edge, it will drop into the printer and cause a malfunction. - Epson SureColor S70675 High Production Edition | User Manual - Page 176
Important: If the media holding plate is inserted into the right edge, it will drop into the printer and cause a malfunction. When inserting the plate, check the following two points. ❏ Align the white line on the platen with the line on the media holding plate. Maintenance 176 - Epson SureColor S70675 High Production Edition | User Manual - Page 177
❏ While pressing the tip of the metallic plate against the platen, attach the hooked sections to the front corner of the platen. 5. Check that two hooked sections at the rear of the media holding plate are securely applied as shown below and that they are attached with no gap between the plate and - Epson SureColor S70675 High Production Edition | User Manual - Page 178
❏ The latch at the rear of the tab is inserted in the front corner of the platen. Important: If both hooked sections are not positioned correctly, return to Step 3 to attach them again. Otherwise, the head may be damaged. 6. While holding the tabs of each media holding plate on both sides, move - Epson SureColor S70675 High Production Edition | User Manual - Page 179
Disposal of Used Consumables Used cleaning sticks, dirty ink cleaner, waste ink bottles, wipers, wiper cleaners, flushing pads, and post-printing media are industrial waste. Dispose of items according to local laws and regulations. For example, contract an industrial waste disposal company for - Epson SureColor S70675 High Production Edition | User Manual - Page 180
Consumable Replacement Check Sheet Use this page to track maintenance tasks. When to replace Component to be replaced Cleaned on date When a replacement message is 2. Waste ink bottle / / / / / displayed on the control panel screen See "Disposing of Waste Ink" on / / / / / page 166. - Epson SureColor S70675 High Production Edition | User Manual - Page 181
Other Maintenance Checking for Clogged Nozzles We recommend that you check the nozzles for clogs each time you print to ensure quality results. There are three ways to check for clogs. ❏ Auto Nozzle Check The printer automatically checks for clogs at specified intervals by scanning a test pattern - Epson SureColor S70675 High Production Edition | User Manual - Page 182
Depending on the width of the media used, you can save media by printing additional test patterns in the space beside an existing pattern: ❏ If the width is equal to or greater than 51 inches but less than 64 inches, up to three patterns can be printed (one on the left, one in the center, and one on - Epson SureColor S70675 High Production Edition | User Manual - Page 183
print head as described below. There is no need to clean the head if the print result does not contain faint areas or other color problems. Maintenance 183 - Epson SureColor S70675 High Production Edition | User Manual - Page 184
Head cleaning level Choose from three levels of head cleaning. Select Execute (Light) first. If the pattern still contains faint or missing segments after head cleaning has been performed once, try again using Execute (Medium) or Execute (Heavy). Auto maintenance options The printer features handy - Epson SureColor S70675 High Production Edition | User Manual - Page 185
" on page 181. If you paused the printer in Step 1, printing will resume when head cleaning is complete; check the printout to confirm whether the problem has been resolved. If nozzle clogs cannot be cleared even after repeated head cleaning, the area around the print head maybe stained. See the - Epson SureColor S70675 High Production Edition | User Manual - Page 186
Head Washing If nozzle clogs cannot be cleared even after you have performed normal head cleaning several times and cleaned around the print head, perform Head Washing from the Maintenance menu. Check colors with faint or missing segments in the nozzle check pattern, and select the appropriate ones - Epson SureColor S70675 High Production Edition | User Manual - Page 187
Product name S70675 S506752 S30675 Color mode 10 Color 9 Color 8 Color (unfixed) 8 Color (fixed) 5C Mode 4C Mode - Cartridges 10 9 8*1 8 10 (5) 8 (4) 4 1 Eight cartridges are required, excluding the two attached cartridges. 2 The number enclosed in parentheses indicates the number of required - Epson SureColor S70675 High Production Edition | User Manual - Page 188
Follow the on-screen instructions to replace the cartridge. When Ready appears on the screen, head washing is complete. Print a nozzle pattern and inspect the results to determine whether the problem has been resolved. See "Printing nozzle check patterns" on page 182. Note: In the S70675 or S50675, - Epson SureColor S70675 High Production Edition | User Manual - Page 189
❏ Tint unevenness of colors other than spot color: All (except MS/WH) or All (except WH) 8 Color mode (S70675), 4C Mode (S50675), S30675 Select All Nozzles. Long-Term Storage (Pre-Storage Maintenance) If the printer will not be used for an extended period (and switched off), perform Pre-Storage - Epson SureColor S70675 High Production Edition | User Manual - Page 190
S50675 (4 color mode) Interval Cartridges 3 weeks or more 8 S30675 Interval 1 month or more Cartridges 4 Colors All Nozzles (All colors) Colors All Nozzles (All colors) Important: After performing Pre-Storage Maint. for spot color ink only, you must charge spot color ink if you want to - Epson SureColor S70675 High Production Edition | User Manual - Page 191
ink. When charging using removed ink cartridges, have new ink cartridges on hand as a precaution. Switch on the power and follow the on-screen instructions. When first printing after restarting use, perform a nozzle check and check that there are no clogs. See "Checking for Clogged Nozzles" on page - Epson SureColor S70675 High Production Edition | User Manual - Page 192
Changing from 10 Color mode ❏ When not using only the Metallic Silver for three months* or more: Select 9 Color. One Cleaning cartridge is required. ❏ When not using both spot color inks for three months* or more: Select 8 Color (Unfixed). Two Cleaning cartridges are required. Changing from 9 Color - Epson SureColor S70675 High Production Edition | User Manual - Page 193
to select Change Color Mode and press the Z button. 3. Use the d/u buttons to select any mode and press the Z button. Follow the on-screen instructions to replace the cartridge. When storing the ink cartridges that were removed during use, see "Handling ink cartridges" on page 32. Maintenance 193 - Epson SureColor S70675 High Production Edition | User Manual - Page 194
Applying Secondary Carriage Rod Grease If Apply secondary carriage rod grease. See manual. is displayed on the screen of the control panel, grease using the grease kit supplied with the printer. ❏ In the illustration below (showing the S70675), - Epson SureColor S70675 High Production Edition | User Manual - Page 195
3. Hold the grease tool against the secondary carriage rod (rod A) so that the pad on the tool is placed firmly against the back of the rod, and then slide it smoothly twice from one end to the other and back again to wipe off stains on the rod. 4. Using a new cleaning stick, stir the grease in the - Epson SureColor S70675 High Production Edition | User Manual - Page 196
❏ Apply the grease to the pad at the end of the grease tool. 7. Hold the grease tool against the secondary carriage rod and smoothly slide it twice from one end to the other and back again as shown in Step 3. 8. Remove the stained pad, and then store the grease tool with the grease. When disposing - Epson SureColor S70675 High Production Edition | User Manual - Page 197
while the maintenance request is displayed. See "When a Maintenance Call/Service Call Occurs" on page 217. Part life varies with operating conditions. the quality of the print results. Contact your dealer or Epson Support for information on replacing components. Component status can be printed by - Epson SureColor S70675 High Production Edition | User Manual - Page 198
Chapter 4 Using the Control Panel Menu Menu Operations The menus are used as shown below. Menu List The following items and parameters can be set and executed in the Menu. See the reference pages for more details on each item. Items or values marked with a superscript "1" apply to the S70675 and - Epson SureColor S70675 High Production Edition | User Manual - Page 199
to 15 m (4 to 50 ft) Print RIP Settings, 1 to 30 (media setting bank number) 1.5, 2.0, 2.5 Input thickness. 0.1 to 1.0 mm (4 to 40 mil) Print Print Manual(Uni-D), Manual(Bi-D), Manaul(Dual Head)*1 Printable Side Out, Printable Side In Periodically, Every Page, Off 0 to 40 Yes, No Up to 22 half-size - Epson SureColor S70675 High Production Edition | User Manual - Page 200
Menu Printer Setup See "The Printer Setup Menu" on page 208. Item Media Tension Media Suction Head Movement Tension Measurement Multi-Strike Printing Feed Speed Roll Type Restore Settings Print Media List Side Margin(Right) Side Margin(Left) Print Start Position Media Size Check Media End Check - Epson SureColor S70675 High Production Edition | User Manual - Page 201
Menu Maintenance See "The Maintenance Menu" on page 211. Item Nozzle Check Print At Right Print At Center Print At Left Cleaning All Nozzles Head 1/Head 22, Head 12, Head 22 Selected Nozzles Head Maintenance Waste Ink Counter Ink Circulation1 Ink Refresh Head Washing Pre-Storage Maint. Change - Epson SureColor S70675 High Production Edition | User Manual - Page 202
Menu Network Setup See "The Network Setup Menu" on page 213. Item IP Address Setting Auto Panel Preference See "The Preference Menu" on page 214. Reset All Settings See "The Reset All Settings Menu" on page 214. Bonjour Print Status Sheet Restore Settings Date And Time Language Unit: Length Unit: - Epson SureColor S70675 High Production Edition | User Manual - Page 203
Details of the Menu Items or values marked with a superscript "1" apply to the S70675 and S50675; items marked with a superscript "2" apply to the S50675; items marked with a superscript "3" apply to the S30670; items marked with a superscript "4" apply to the S70670. The Media Setup Menu The Media - Epson SureColor S70675 High Production Edition | User Manual - Page 204
thickness. 0.1 to 1.0 mm (4 to 40 mil) Print Print Manual(Uni-D), Manual(Bi-D), Manual(Dual head)1 Select Head Alignment to realign print head when print media, resulting in excessive slack or other maladjustments that cause printing problems, in which case you should select Off. Note, however, - Epson SureColor S70675 High Production Edition | User Manual - Page 205
Platen Gap Auto Media Adjust Parameter 1.5 2.0 2.5 Media Adjust Feed Adjustment Auto Manual Head Alignment Standard (Auto) Standard (Manual) Block pattern Heating & Drying Print Print Print Print Manual(Uni-D) Manual(Bi-D) Manual(Dual Head)1 Explanation Assign the media setting bank a name up to - Epson SureColor S70675 High Production Edition | User Manual - Page 206
. See "The Printer Setup Menu" on page 208. During general use, use the default setting value without changing it. When using special media or when a problem such as head striking or banding is detected in printing results, change the default. Using the Control Panel Menu 206 - Epson SureColor S70675 High Production Edition | User Manual - Page 207
, the print head will move the full width of the largest media supported by the printer. Select this option for more even print results with less some media, resulting in excessive slack or other maladjustments that cause printing problems, in which case you should select Off. Note, however, that Off - Epson SureColor S70675 High Production Edition | User Manual - Page 208
Print Media List Parameter Print Explanation Print the contents of media setting banks 1 to 30. The Printer Setup Menu indicates default settings. Item Side Margin(Right) Side Margin(Left) Print Start Position Media Size Check Media End Check Media Skew Check Head Strike Warning2 Parameter 3 to - Epson SureColor S70675 High Production Edition | User Manual - Page 209
Item Warning Options Warning Level Options Auto Nozzle Check Nozzle Check Cycle Options When Clogged Print Nozzle Pattern Periodical Cleaning Parameter Off On 1 to 5 Explanation Choose whether the printer automatically detects (On) or does not automatically detect (Off), the media lifting during - Epson SureColor S70675 High Production Edition | User Manual - Page 210
Item Light Medium Heavy Power3 Cleaning Cycle Heat Off Timer Head Mode1 Restore Settings Parameter Off/1 to 240 hours Off 1 to 10 pages 15 to 240 minutes 2 Heads Mode Head 1 Head 2 Yes No Explanation Choose the frequency with which the printer performs head cleaning for each level: never (Off) or - Epson SureColor S70675 High Production Edition | User Manual - Page 211
(Light) first. If the problem persists after you have used Execute (Light), choose Execute (Medium). If the problem persists after you have used using this option to position the head for cleaning. Moving the print head manually could cause malfunction. See "Regular Cleaning" on page 137. If you - Epson SureColor S70675 High Production Edition | User Manual - Page 212
Item Change Color Mode4 Parameter 8 Color (Unfixed), 9 Color, 10 color The Ink Level Menu Item Explanation The menu displayed in the setting item varies depending on the currently specified mode. When spot color ink printing is not performed at all for longer than a specified period of time, - Epson SureColor S70675 High Production Edition | User Manual - Page 213
enabled, the last uploaded time is displayed. This function is not supported in some areas and some countries. View the printer Firmware Version. Off Print Yes No Choose whether IP addresses are obtained automatically (Auto) or manually (Panel) using DHCP. If Panel is selected, enter an IP address, - Epson SureColor S70675 High Production Edition | User Manual - Page 214
The Preference Menu indicates default settings. Item Date And Time Language Unit: Length Unit: Temperature Alert Sound Setting Alert Lamp Setting Parameter MM/DD/YY HH:MM Japanese English French Italian German Portuguese Spanish Dutch Russian Korean Chinese m ft/in °C °F On Off On Off Explanation - Epson SureColor S70675 High Production Edition | User Manual - Page 215
Problem Solver When a Message Is Displayed If one of the following messages is displayed, read and follow the instructions control panel again, contact your dealer or Epson support. See "Replacing and Shaking Ink Cartridges" on Guide and the Heavy Media Roll System Setup Guide. Problem Solver 215 - Epson SureColor S70675 High Production Edition | User Manual - Page 216
service life. Auto Take-up Reel Unit stopped. Media Size Error Load correct size media. Media Sensor Error Loaded media or print out has a problem Support. The current print head is nearing the end of its service life. Contact your dealer or Epson Support printer, execute the manual menu. If this - Epson SureColor S70675 High Production Edition | User Manual - Page 217
error. Lower the media loading lever again, and follow the on-screen instructions of the printer to correctly specify the Roll Type. This message is service is displayed on the LCD panel, contact Epson Support for assistance. Tell them the call for service code is "XXXX". Problem Solver 217 - Epson SureColor S70675 High Production Edition | User Manual - Page 218
directly to the computer using a USB cable, and then try to print. If you can print via USB, there are some problems on the network environment. Ask your system administrator, or refer to the manual for your network system. If you cannot print via USB, see the appropriate section in this User - Epson SureColor S70675 High Production Edition | User Manual - Page 219
been clogged. Steps to take when the printer has not been used for a long time. See "Notes When Not Using the Printer" on page 31. Problem Solver 219 - Epson SureColor S70675 High Production Edition | User Manual - Page 220
but may slightly reduce print quality. For better quality results, select Printer Full Width for Head Movement. See "The Printer Setup Menu" on page 208. Problem Solver 220 - Epson SureColor S70675 High Production Edition | User Manual - Page 221
the cartridge thoroughly and perform Ink Circulation several times. See "Shaking cartridges" on page 163 and "Ink Refresh" on page 188. If the problem persists, perform Ink Refresh. The print is not positioned properly on the media. o Is the media loaded correctly and are the margins correct? If - Epson SureColor S70675 High Production Edition | User Manual - Page 222
. Areas secured by pressure rollers are stained. o Are the pressure rollers stained? Clean the pressure rollers. See "Cleaning Inside the Printer (Daily)" on page 155. Problem Solver 222 - Epson SureColor S70675 High Production Edition | User Manual - Page 223
adhered, capping fails, causing a printing failure. Clean the affected area periodically. See "Regular Cleaning" on page 137. o Replace consumables. If the problem persists after Head Cleaning has been performed several times or regular cleaning has been performed, the wipers or wiper cleaners may - Epson SureColor S70675 High Production Edition | User Manual - Page 224
Horizontal lines or tint unevenness (banding) Multiple causes are possible. Perform the following sequence until the print results have improved. If the following problems remain unsolved, this symptom will not be able to be resolved by taking any actions. Before taking any actions, check that such - Epson SureColor S70675 High Production Edition | User Manual - Page 225
is required even with the same media. In Media Adjust, select Feed Adjustment - Manual - 500mm Pattern. See "Changing Settings During Printing" on page 121. If feed adjustment does not resolve the problem, continue with the next step. 4. Resolve ink drying time differences. During bidirectional - Epson SureColor S70675 High Production Edition | User Manual - Page 226
sections with wrinkles or waviness before using media. Furthermore, store media as described in the manual accompanying the printer and load media in the printer just before printing. If the problem is not resolved even when printing on sections without wrinkles or waviness, continue with the next - Epson SureColor S70675 High Production Edition | User Manual - Page 227
or canvas ❏ Set the value to 2 temporarily. See "Customize Settings" on page 204. ❏ Print and check if the print results have improved. ❏ If the problem is not resolved, raise the setting value one level. Repeat Steps 2 and 3 until print results are improved in the range up to a setting value of - Epson SureColor S70675 High Production Edition | User Manual - Page 228
to 40. See "Customize Settings" on page 204. ❏ Print and check if the print results have improved. If changing Media Tension does not resolve the problem, return the Media Tension setting to default and continue with the next step. 5. Check that the media is loaded correctly in the auto take-up - Epson SureColor S70675 High Production Edition | User Manual - Page 229
reel unit and attachment of counterweights. See "Using the Auto Take-up Reel Unit" on page 92. If the measures above do not resolve the problem, continue with the next step. 6. Adjust Media Suction. Media may rise because the media suction is weak. Adjust Media Suction in the following manner. ❏ Set - Epson SureColor S70675 High Production Edition | User Manual - Page 230
or too thin? Check the media specifications to determine whether it can be used in the printer. See "Supported Media" on page 235. If you are using a software RIP, contact the manufacturer for information on the . Continued use could damage the pressure rollers or print head. Problem Solver 230 - Epson SureColor S70675 High Production Edition | User Manual - Page 231
moving the media holding plates out of the way. Contact with deformed media holding plates could damage the print head. 5. Raise the media loading lever. Problem Solver 231 - Epson SureColor S70675 High Production Edition | User Manual - Page 232
groove and use a cutter to remove torn or creased portions. 7. Manually rewind the cut media. 8. Remove any media that remains inside the /S50675" on page 41 or "Loading Media - S30675" on page 65. Other Problems Periodical Cleaning is set to Off, but auto cleaning is performed. o The printer - Epson SureColor S70675 High Production Edition | User Manual - Page 233
reel unit. o See the following sections and clean the part. See "Cleaning the Sides of the Auto Take-up Reel Unit (Daily)" on page 161. Problem Solver 233 - Epson SureColor S70675 High Production Edition | User Manual - Page 234
erratic printer behavior. Information about non-genuine ink levels may not be displayed, and use of non-genuine ink is recorded for possible use in service support. Appendix 234 - Epson SureColor S70675 High Production Edition | User Manual - Page 235
wipe is not available from Epson, BEMCOT M-311 from Asahi Kasei Corporation is recommended. 2 Not available for purchase in some countries and regions. Supported Media The following media can be used with the printer. Print quality is greatly affected by the type and quality of media used. Choose - Epson SureColor S70675 High Production Edition | User Manual - Page 236
Standard Roll Media System Roll core size Roll outer diameter Media width Media thickness Roll weight 2 or 3 inches Up to 250 mm (9.8 inches) 300* to 1626 mm (11.8 to 64 inches) Up to 1 mm (0.04 inch) Up to 40 kg (88.2 lb) *Minimum media width for ink layering is 508 mm (20 in.) Heavy Roll Media - Epson SureColor S70675 High Production Edition | User Manual - Page 237
the steps below to ready it for use. 1. Check that the new location is appropriate. See the Setup Guide. 2. Plug in the power cables and turn the printer on. See the Setup Guide. 3. Perform a nozzle check to check for clogged nozzles. See "Checking for Clogged Nozzles" on page 181. Appendix 237 - Epson SureColor S70675 High Production Edition | User Manual - Page 238
in the media settings and check print quality. See "Auto Media Adjust" on page 113. Transportation Before transporting the printer, contact Epson Support. Recommended Media Settings To register media settings, refer to the table shown below. For all the item values in the media settings, you - Epson SureColor S70675 High Production Edition | User Manual - Page 239
After heater Advanced Settings Media Suction Media Tension Counterweight1 Adhesive vinyl 50 Transparent or white film 50 4 4 15 15 - - 1 See "Using the Auto Take-up Reel Unit" on page 92. 2 Change the factory default setting value. Banner 50 4 302 Attach Canvas 50 4 15 - Microweave (M/W) - Epson SureColor S70675 High Production Edition | User Manual - Page 240
Resolution (dpi) 720×1440 Number of passes 12 M/W level 3 4 Result Stripe banding less likely Tint unevenness less likely Recommendation ✓ S50675 Resolution (dpi) Banner 720×720 Number of passes 4 M/W level 1 2 3 4 Vinyl 720×1440 6 0 1 All media (Including Banner/Vinyl) 720×1440 8 2 - Epson SureColor S70675 High Production Edition | User Manual - Page 241
Note: In some cases, your software RIP does not support the above-mentioned print modes. S30675 Resolution Number M/W (dpi) of passes level Banner 2 720×720 4 3 Vinyl 0 720×1440 6 1 All media (Including Banner/Vinyl) 3 720×1440 8 4 - Epson SureColor S70675 High Production Edition | User Manual - Page 242
Specifications Printer Specifications Printing method Nozzle configuration Resolution (maximum) Control code Media feed method Built-in memory Interface Rated voltage (#1, #2, #32) Rated frequency (#1, #2, #32) Rated current (#1, #2) Rated current (#32) Power consumption On-demand ink jet S70675: - Epson SureColor S70675 High Production Edition | User Manual - Page 243
Printer Specifications Temperature Humidity Dimension Weight 3 Operating: 15 to 35 °C/59 to 95 °F (20 to 32 °C/68 to 89 °F recommended) Storage: -20 to 40°C (-4 to 104oF) (within a month at 40°C or 104oF) Operating: 20 to 80% (40 to 60% recommended) (without condensation) Storage: 5 to 85% (without - Epson SureColor S70675 High Production Edition | User Manual - Page 244
. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference - Epson SureColor S70675 High Production Edition | User Manual - Page 245
WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a - Epson SureColor S70675 High Production Edition | User Manual - Page 246
and proof of purchase. Visit Epson's U.S. support website (www.epson.com/support) or Canadian website (www.epson.ca/support) and select your product for solutions to common problems. You can download drivers, firmware, and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your - Epson SureColor S70675 High Production Edition | User Manual - Page 247
. If you desire to receive the source code of the Bonjour Programs, please see the "Contacting Customer Support" in Appendix or Printing Guide of this User's Guide, and contact the customer support of your region. You can redistribute Bonjour Programs and/or modify it under the terms of the Apple - Epson SureColor S70675 High Production Edition | User Manual - Page 248
, to anyone other than You; and/or (b) to use Covered Code, alone or as part of a Larger Work, in any way to provide a service, including but not limited to delivery of content, through electronic communication with a client other than You. 1.5 "Larger Work" means a work which combines Covered - Epson SureColor S70675 High Production Edition | User Manual - Page 249
(a) You must retain and reproduce in all copies of Original Code the copyright and other proprietary notices and disclaimers of Apple as they appear in the Original Code, and keep intact all notices in the Original Code that refer to this License; and (b) You must include a copy of this License with - Epson SureColor S70675 High Production Edition | User Manual - Page 250
from Apple which Apple may grant in its sole discretion. 6. Additional Terms. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations and/or other rights consistent with the scope of the license granted herein ("Additional Terms") to one or more - Epson SureColor S70675 High Production Edition | User Manual - Page 251
COVERED CODE IS PROVIDED "AS IS" AND WITHOUT WARRANTY, UPGRADES OR SUPPORT OF ANY KIND AND APPLE AND APPLE'S LICENSOR(S) (COLLECTIVELY REFERRED TO AS any other trademarks, service marks, logos or trade names belonging to Apple (collectively "Apple Marks") or to any trademark, service mark, logo or - Epson SureColor S70675 High Production Edition | User Manual - Page 252
11. Ownership. Subject to the licenses granted under this License, each Contributor retains all rights, title and interest in and to any Modifications made by such Contributor. Apple retains all rights, title and interest in and to the Original Code and any Modifications made by or on behalf of - Epson SureColor S70675 High Production Edition | User Manual - Page 253
13.3 Independent Development. Nothing in this License will impair Apple's right to acquire, license, develop, have others develop for it, market and/or distribute technology or products that perform the same or similar functions as, or otherwise compete with, Modifications, Larger Works, technology - Epson SureColor S70675 High Production Edition | User Manual - Page 254
The Original Code and all software distributed under the License are distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR - Epson SureColor S70675 High Production Edition | User Manual - Page 255
from misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or the Info-ZIP URL(s), such as to imply Info-ZIP will provide support for the altered versions. 4. Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip," "UnZipSFX," "WiZ," "Pocket UnZip," "Pocket Zip," and
![](/manual_guide/products/epson-surecolor-s30675-88bfda0/1.png)
.
Epson
®
SureColor
®
S30675
S50675
S70675
User’s Guide