Epson SureColor S80600 User Manual

Epson SureColor S80600 Manual

Epson SureColor S80600 manual content summary:

  • Epson SureColor S80600 | User Manual - Page 1
    Epson® SureColor® Network Guide
  • Epson SureColor S80600 | User Manual - Page 2
    this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation and its affiliates shall not be liable against any damages or problems arising from the use of any options or any consumable products other
  • Epson SureColor S80600 | User Manual - Page 3
    This information is subject to change without notice. Copyright © 2015 Epson America, Inc. 10/15 CPD-39090R2 Copyright and Trademarks 3
  • Epson SureColor S80600 | User Manual - Page 4
    Instructions Warning, Caution, Important, and Note 7 Introduction About Your Printer 8 About This Guide 8 Operating Environment 9 Features of the Network Interface 9 Network Interface Operation 10 Status light 10 Network connector 10 About the Software 17 OS X 18 Setting Up the Network
  • Epson SureColor S80600 | User Manual - Page 5
    Software EpsonNet Config for Windows 31 About EpsonNet Config 31 System Requirements 31 Installing EpsonNet Config 31 Accessing the EpsonNet Config User's Guide Printer Port 43 Troubleshooting General Problems 46 Tips for Administrator Setting an IP Address on the Printer's Control Panel 47
  • Epson SureColor S80600 | User Manual - Page 6
    IEEE 802.1X 48 Secure Communications (IPsec/Access Control 49 Overview and Sample Settings 49 Configuration Workflow 50 Product Security Policies 51 Supported Security Methods 54 6
  • Epson SureColor S80600 | User Manual - Page 7
    Safety Instructions Warning, Caution, Important, and Note Warning must be followed carefully to avoid serious bodily injury. Caution must be followed observed to avoid damage to your equipment. Note contains important information and useful tips on the operation of your printer. Safety Instructions 7
  • Epson SureColor S80600 | User Manual - Page 8
    interface on a network. It includes how to set up the network interface, install the configuration software, and modify network settings of your printer and computers. For information about your printer, see your User's Guide. Note: O To read the guide, you must have Adobe Reader or Adobe Acrobat
  • Epson SureColor S80600 | User Manual - Page 9
    Some screen shots in this guide may list a printer name other than your printer. This difference does not alter the instructions. O The supported operating systems are different depending on the printer. See your printer's User's Guide for the supported operating systems. Operating Environment The
  • Epson SureColor S80600 | User Manual - Page 10
    Network Status Ready (10 M link) Receiving packets (10 M link) Ready (100 M link) Receiving packets (100 M link) Large format inkjet printers (Models that support 1000 Mbps communication) Status light Red Red Green Green Data light Yellow Yellow (Flashing) Yellow Yellow (Flashing) Network Status
  • Epson SureColor S80600 | User Manual - Page 11
    Software The Software Disc provided with your printer includes the following network software. Note: The software provided varies depending on your printer that provides peer to peer printing to Epson printers on the TCP/IP network. See "EpsonNet Print (for Windows users)" on page 36 Introduction
  • Epson SureColor S80600 | User Manual - Page 12
    (Windows)" on page 19, "Configuring the Network Interface (OS X)" on page 20, or "Installing the Printer Driver" on page 21 for details. 6. If necessary, configure the network settings of the network interface using EpsonNet Config. Configure the network interface using EpsonNet Config. For Windows
  • Epson SureColor S80600 | User Manual - Page 13
    exists On the server, set the printer to connect and turn it into a shared printer. Your clients can then print to this shared printer. Printing from OS X OS directly to the network; no USB cable required. O No special utility for Windows is required. O You can see the printer status using EPSON
  • Epson SureColor S80600 | User Manual - Page 14
    operating system. Note: O The Windows operating system disk may be required during the installation. O When using TCP/IP for printing, you need to set the IP address, the subnet mask, and the default gateway of the computer. Windows 8.x/7/Vista/Server 2012/Server 2008 Use the following procedure to
  • Epson SureColor S80600 | User Manual - Page 15
    Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) on the Local Area Connection Properties dialog box to open the properties dialog box. Set the IP address, the subnet mask, etc. and then click OK. 5. Restart the computer. The necessary components are now installed. Go to the section
  • Epson SureColor S80600 | User Manual - Page 16
    5. Double-click Internet Protocol (TCP/IP) on the Local Area Connection Properties dialog box to open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP address, the subnet mask, etc. and then click OK. 6. Restart the computer. The necessary components are now installed. Go to the
  • Epson SureColor S80600 | User Manual - Page 17
    are in the list. The following table lists the components required for configuring the network interface with EpsonNet Config. EpsonNet Config's setting screens TCP/IP, WSD, UPnP, Bonjour Necessary components Internet Protocol (TCP/IP) The following table lists the components required for
  • Epson SureColor S80600 | User Manual - Page 18
    Setting Up the Network Interface" on page 18. Setting Up the Network Interface Connecting the Network Interface to the Network Follow the instructions below to connect the network interface to the network. 1. Make sure that your printer computer directly. Be sure to use a HUB to connect the
  • Epson SureColor S80600 | User Manual - Page 19
    want to disable the Bonjour setting, use the printer's control panel. See your printer User's Guide for details. Now, you can configure the network interface to use on the TCP/IP network and also install the printer driver using the Software Disc shipped with your printer. If you are using Windows
  • Epson SureColor S80600 | User Manual - Page 20
    the Epson Driver and Utilities check box and EpsonNet Network Utilities check box, then click the Install button. Note: If your printer is connected to your computer with a USB cable, clear the EpsonNet Network Utilities check box. 8. Software installation starts. Follow the on-screen instructions
  • Epson SureColor S80600 | User Manual - Page 21
    on the TCP/IP network. Note: If your printer supports scanning, see the product's User's Guide to configure the settings. Installing the Printer Driver About Installing the Printer Driver To print to the network printer, you need to install the printer driver on the computer. The following section
  • Epson SureColor S80600 | User Manual - Page 22
    3. Click Add a local printer. 4. Select the Create a new port radio button, and then select Standard TCP/IP Port from the list. Then click Next. 5. Enter the IP address of the network interface and then click Next. How To 22
  • Epson SureColor S80600 | User Manual - Page 23
    radio button and then select EPSON Network Printer. Click Next. 7. Click Finish. 8. See "Installing the Printer Driver" on page 21 to install the printer driver. Installing the printer driver 1. Insert the Software Disc shipped with the printer or run the software package that you downloaded
  • Epson SureColor S80600 | User Manual - Page 24
    and follow the on-screen instructions to complete the setup. Windows XP The printer driver installation procedure differs printer check box, and then click Next. Note: You must clear the Automatically detect and install my Plug and Play printer check box because the printer is attached directly
  • Epson SureColor S80600 | User Manual - Page 25
    4. Select the Create a new port radio button, and then select Standard TCP/IP Port from the list. Then click Next. 5. Enter the IP address of the network interface and then click Next. How To 25
  • Epson SureColor S80600 | User Manual - Page 26
    radio button and then select EPSON Network Printer. Click Next. 7. Click Finish. 8. See "Installing the printer driver" on page 26 to install the printer driver. Installing the printer driver 1. Insert the Software Disc shipped with the printer or run the software package that you downloaded
  • Epson SureColor S80600 | User Manual - Page 27
    follow the on-screen instructions to complete the setup. Windows Server 2003 The printer driver installation procedure differs printer check box, and then click Next. Note: You must clear the Automatically detect and install my Plug and Play printer check box because the printer is attached directly
  • Epson SureColor S80600 | User Manual - Page 28
    4. Select the Create a new port radio button, and then select Standard TCP/IP Port from the list. Then click Next. 5. When the Add Standard TCP/IP Printer Port Wizard dialog box appears, click Next. 6. Enter the IP address of the network interface and then click Next. How To 28
  • Epson SureColor S80600 | User Manual - Page 29
    radio button and then select EPSON Network Printer. Click Next. 8. Click Finish. 9. See "Installing the printer driver" on page 26 to install the printer driver. Installing the printer driver 1. Insert the Software Disc shipped with the printer or run the software package that you downloaded
  • Epson SureColor S80600 | User Manual - Page 30
    . OS X Follow the steps below to set up a printer. Note: Make sure that the printer driver is installed on your OS X system before following the steps below. See the manual shipped with your printer for instructions on how to install the printer driver. Bonjour printing 1. Open System Preferences
  • Epson SureColor S80600 | User Manual - Page 31
    disk drive space 30 MB Installing EpsonNet Config You can install EpsonNet Config on your computer from the Software Disc that comes with your printer or the software package that you downloaded. Insert the Software Disc in the CD/DVD drive or run the installer, then select EpsonNet Config on the
  • Epson SureColor S80600 | User Manual - Page 32
    you add or delete protocols or services from your operating system after installing Guide appears. By clicking the links on the front page or contents page, you can get information on using EpsonNet Config. EpsonNet Config for Mac OS About EpsonNet Config EpsonNet Config is configuration software
  • Epson SureColor S80600 | User Manual - Page 33
    Software Disc that comes with your printer or the software package that you downloaded. Insert the Software Disc in the CD/DVD drive or run the installer, then select EpsonNet Config on the Software on your computer. O TCP/IP must be correctly set for the computer and the network interface. O Do not
  • Epson SureColor S80600 | User Manual - Page 34
    instructions. ❏ If Set supported, we recommend that you select Manual and then enter an IP address. This is because if you select Auto, the IP address of the network interface changes every time you turn on the printer so that you need to change the printer port setting accordingly. Network Software
  • Epson SureColor S80600 | User Manual - Page 35
    follow the on-screen instructions to reset the printer. Note: ❏ Since the new IP address becomes available after the printer is reset, you need to restart EpsonNet Config by entering the new IP address. ❏ Only changes on the page where you press the Transmit button take effect. Network Software 35
  • Epson SureColor S80600 | User Manual - Page 36
    network interface into the address bar of your browser. Note: O The item appears only if your printer supports the function, and the name of the item may vary depending on the model. O See utility program that provides peer-to-peer printing to Epson printers on the TCP/IP network Network Software 36
  • Epson SureColor S80600 | User Manual - Page 37
    for a printer with its IP address assigned manually, see "Adding a port for a printer assigned with a static IP address" on page 40. Note: O Be sure that the computer is connected to the network and TCP/IP is correctly set. O A valid IP address must be assigned to the printer. Network Software 37
  • Epson SureColor S80600 | User Manual - Page 38
    list. Click Next. Note: If the Windows Security Alert screen appears, click the Unblock button, and then click the Search Again button to search the printers. 3. Select the target printer, and then click Next. Network Software 38
  • Epson SureColor S80600 | User Manual - Page 39
    However, Manual Setting is always displayed on the top of the list regardless of sorting. ❏ If you want to search printers in other segments, click the N/W Settings button. error. 4. Confirm the information about the printer's port you want to configure, and then click Finish. Network Software 39
  • Epson SureColor S80600 | User Manual - Page 40
    are in the same segment, you can select this port type. IP Address (Manual): Use the printer's IP Address for the port name. HostName (DNS): Use the printer's host name registered in the DNS server for the port name. The following items are displayed: - Port Name (If the port type is changed, the
  • Epson SureColor S80600 | User Manual - Page 41
    , clear the Automatically detect and install my Plug and Play printer check box, and then click Next. Select the Create a click the Search Again button to search the printers. 3. Select Manual Setting from the list, and then click Next. 4. Enter the printer's name and the port name is automatically
  • Epson SureColor S80600 | User Manual - Page 42
    is created in your computer. To install the printer driver, see "Installing the Printer Driver" on page 42. Installing the Printer Driver Install the printer driver on your computer using the Software Disc that came with your printer or the software package that you downloaded. See "Installing the
  • Epson SureColor S80600 | User Manual - Page 43
    button. Click Next. 8. Click Finish and follow the on-screen instructions to complete the setup. 9. The printer is now ready for peer-to-peer printing. To configure the printer port, see "Configuring the Printer Port" on page 43. Configuring the Printer Port Follow the steps below to configure the
  • Epson SureColor S80600 | User Manual - Page 44
    RAW) radio button. The Epson high-speed printing port sends a print job to the target network printer without spooling all of printer does not support High-Speed printing, or if you fail to connect to the printer, an error message appears. Follow the message to remedy the problem. Network Software
  • Epson SureColor S80600 | User Manual - Page 45
    Troubleshooting General Problems Cannot configure the network interface or cannot print from the network. Cause The printer settings or network settings may be wrong. What to do First, check to see if you can print a status sheet, as described in "Printing a Network Status Sheet" on page
  • Epson SureColor S80600 | User Manual - Page 46
    TCP/IP is installed on the computer, but its IP address is not set correctly. What to do Install the TCP/IP protocol. Set a correct IP address for the computer. Unable to start EpsonNet Config with interface. To print a network status sheet, see the printer's User Guide. Troubleshooting 46
  • Epson SureColor S80600 | User Manual - Page 47
    to set the IP address for the network interface. For information on using the printer control panel to enter the IP address, subnet mask, and default gateway, see the printer User's Guide. Secure Communication Using IPsec, Access Control, SSL, and IEEE 802.1X Some printers may not support secure
  • Epson SureColor S80600 | User Manual - Page 48
    Remote Manager on the computer and import the digital certificate, then make the IEEE 802.1X settings and other necessary settings. 4. Turn off the printer and disconnect the printer and computer. 5. Connect the printer to the destination IEEE 802.1X network and turn it on, then print the network
  • Epson SureColor S80600 | User Manual - Page 49
    your printer supports these features, see the printer manual. This document provides sample IPsec/Access Control configurations and information on setup and troubleshooting. Overview and Sample Settings IPsec and Access Control are configured differently and use different connection types. Review
  • Epson SureColor S80600 | User Manual - Page 50
    the network. 2. Adjust Remote Manager settings. See the following page information on Remote Manager settings. 3. Transmit the settings to the printer.* 4. Adjust client computer security settings (not required for Access Control). 5. Connect the printer to a secure network. Tips for Administrator
  • Epson SureColor S80600 | User Manual - Page 51
    the product will be used. Note: We recommend that the product be assigned a static IP address for secure access using IPsec or Access Control. Settings will be invalidated if the IP address changes. Sample 1 Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control > Default
  • Epson SureColor S80600 | User Manual - Page 52
    Name Setting RAW (Port 9100) Enable ENPC SNMP Access Permission Enter the print client IP address (prefix length can be used to specify range if desired). Example (IPv4): 192.168.0.0/24 Service Name RAW (Port 9100) ENPC SNMP 1. An Epson protocol used by Epson printer and scanner drivers
  • Epson SureColor S80600 | User Manual - Page 53
    the group policies for administrators precede those for print clients. Note that EpsonNet Config (Windows/OS X) will be unable to detect the printer if separate group policies are not created for the Service Name > ENPC, SNMP options. Sample settings are shown below. Tips for Administrator 53
  • Epson SureColor S80600 | User Manual - Page 54
    Choose Port Service Name Setting RAW (Port 9100) Enable ENPC SNMP Access Permission Enter the print client IP address (prefix length can be used to specify range if desired). Example (IPv4): 192.168.0.0/24 Service Name RAW (Port 9100) ENPC SNMP 1. An Epson protocol used by Epson printer and
  • Epson SureColor S80600 | User Manual - Page 55
    Security method Authentication algorithm Encryption algorithm Key exchange algorithm Option SHA-256 SHA-1 MD5 AES-CBC 256 AES-CBC 192 AES-CBC 128 3DES DES Elliptic Curve Diffie-Hellman P-384 Elliptic Curve Diffie-Hellman P-256 Diffie-Hellman Group 14 Diffie-Hellman Group 2 Diffie-Hellman Group 1
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55

EpsonĀ® SureColorĀ®
Network Guide