Epson SureColor T5470M Start Here - Installation Guide

Epson

®

SureColor

®

T3470/T5470/T5470M

Start Here

IMPORTANT:

Before using this product, make sure you read these instructions

and the safety instructions in the online

User’s Guide

.

The illustrations show the SureColor T3470, but the steps are the same for all

models, unless otherwise specified.

Choose a Location for the Printer

Choose a location for the printer that is near a wall outlet where the power cord

can be easily unplugged. Avoid places subject to rapid changes in temperature

and humidity. Also keep the printer away from direct sunlight, strong light, or

heat sources.

Make sure to place the printer on a flat, stable surface capable of supporting

the weights indicated below and with enough space on all sides (see illustration

below).

SureColor T3470: 141 lbs (64 kg)

SureColor T5470: 167.5 lbs (76 kg)

SureColor T5470M: 196.2 lbs (89 kg)

5.9 in. (150 mm)

5.9 in.

(150 mm)

23.6 in.

(600 mm)

WARNING:

The SureColor T3470 printer requires two people to lift and move it (three

people for the SureColor T5470/T5470M).

Unpack and Place Printer

1

Make sure you have these items:

Printer

Printer and roll spindle

Limited warranty

Ink cartridges (4)

Power cord

Edge guides

(SureColor T5470M)

Stand

Stand (assembled)

Bolts (4)

Basket rods

Paper basket

Note:

To assemble the stand, see the instructions included with the stand

packaging.

2

Remove the protective plastic from the outside of the printer.

3

If you are installing the printer on the stand, lock the front casters by

pushing the tabs down.

4

Lift and place the printer on the stand. Make sure to grip the printer as

shown in the illustrations.

SureColor T3470

SureColor T5470/T5470M

5

Secure the printer to the stand using the supplied bolts.