Epson SureColor T7770DM Start Here - Installation Guide

7

Open the top covers and remove the protective film from the print head

and any tape and protective material inside.

8

Close the top covers.

9

SureColor T5770DM/T7770DM:

Make sure to remove any tape and

protective materials from inside the scanner unit.

10

Remove the tape from the front of the printer and the paper catch

basket.

11

Open the ink cover and remove any protective material inside.

Note:

Make sure to open all compartments and remove all tape and

protective materials from inside the printer before turning the printer on.

Otherwise, you may not be able to print.

Turn On and Configure

1

Connect the power cord to the back of the printer and plug the other

end into an outlet.

Note:

If you are using the SSD (Solid State Drive) unit, make sure to install it

in the expansion slot on the back of the printer before turning the printer on.

(The SSD unit is pre-installed for the SureColor T5770DM/T7770DM; it is an

option for all other models.)

2

Press the

power button on the control panel to turn on the printer.

Epson

®

SureColor

®

T3770D/T3770DE/T3770E/T5770D/T5770DM/T7770D/T7770DL/T7770DM

Start Here

IMPORTANT:

Before using this product, make sure you read these instructions

and the safety instructions in the online

User’s Guide

.

The illustrations show the SureColor T7770D, but the steps are the same for all

models, unless otherwise specified.

Choose a Location for the Printer

Choose a location for the printer that is near a wall outlet where the power cord

can be easily unplugged. Avoid places subject to rapid changes in temperature

and humidity. Also keep the printer away from direct sunlight, strong light, or

heat sources.

Make sure to place the printer on a flat, stable surface capable of supporting the

weight of the printer and with enough space on all sides (see illustration and

table below).

Note:

See the online

User's Guide

for your printer's weight specifications.

7.87 in.

(200 mm)

46.25 in.

(1175 mm)

2.75 in.

(70 mm)

2.75 in.

(70 mm)

12.99 in*

(330 mm)

Model

W

D1

D2

SureColor

T7770D/T7770DM

78.26 in. (1988 mm)

44.44 in. (1129 mm)

in front of the

printer, plus working

space when using

roll paper

62.99 in. (1600 mm)

in front of and behind

printer, plus working

space when using cut

sheets/poster board

SureColor T7770DL

78.46 in. (1993 mm)

SureColor

T5770D/T5770DM

70.27 in. (1785 mm)

SureColor

T3770D/T3770DE

59.25 in. (1505 mm)

SureColor T3770E*

32.63 in. (829 mm)

Note:

If you are loading rigid poster board, the printer must be at least 30 inches

(762 mm) away from the wall.

Unpack and Place Printer

1

Make sure you have these items:

Printer

Ink cartridges (6)

(SureColor T3770D/T3770DE/T3770E/

T5770D/T5770DM/T7770D/T7770DM)

Limited warranty

Power cord

Note:

Initial ink supply units (ink packs) are not included with SureColor

T7770DL.

2

Remove the outer carton from the pallet and printer and carefully lift

the printer off of the pallet.

WARNING:

The printer requires four people to lift and move it. Make sure to

grip the printer as shown in the illustration.

3

Remove the protective plastic and all tape from the outside of the

printer.

4

Lock the front casters by pushing the tabs down.

5

Secure the two adjustable feet on the back of the printer.

Note:

Turn the adjustable feet by hand until they touch the floor. If you turn

them 180° or more after they touch the floor, print quality may decline.

6

Remove the protective film from the touchscreen.

Note:

The touchscreen will not operate if you do not remove the protective

film.

3

Select your language, date, and time on the

touchscreen.

Note:

•

You can change these settings later using the

product’s control panel. For more information, see the online

User’s

Guide

.

•

If an error code appears, turn off the printer and check that no protective

material has been left inside.

4

Follow the instructions on the touchscreen to begin ink initialization.

Install Ink Cartridges (SureColor

T3770D/T3770DE/T3770E/T5770D/

T5770DM/T7770D/T7770DM)

Caution:

Keep the ink cartridges out of the reach of children and do not drink the ink.

Note:

•

The printer is designed for use with Epson

®

cartridges only, not third-party

cartridges or ink.

•

The cartridges included with the printer are designed for printer setup and not for

resale. After some ink is used for initializing, the rest is available for printing.

1

Open the ink cartridges and shake them as shown for 10 seconds, or

about 30 times.

Caution:

Do not touch the green chip on top of the cartridge. Doing so may

prevent normal operation and printing.

2

Open the ink cover.

3

Insert the cartridges in the slot for each color as described on the label

inside the ink cover. Push the cartridges in until they click.

Note:

Make sure all of the ink cartridges are properly inserted in the product;

otherwise printing is not possible.

T3770D5770D7770D_SH_E_CPD61140R1.indd

1

T3770D5770D7770D_SH_E_CPD61140R1.indd

1

3/6/23

10:57 AM

3/6/23

10:57 AM

Epson SureColor T7770DM Start Here - Installation Guide

Epson SureColor T7770DM Manual

Epson SureColor T7770DM manual content summary: