Epson TM-T70II-DT2 Technical Reference Guide

Epson TM-T70II-DT2 Manual

Get Epson TM-T70II-DT2 PDF manuals and user guides View all Epson TM-T70II-DT2 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson TM-T70II-DT2 manual content summary:

  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 1
    for system development using TM-DT software. PC-POS System Development Describes information necessary for developing a PC-POS system. Handling Describes how to handle the product. Replacement of the TM-T70II-DT Describes how to replace the TM-T70II-DT. Product Specifications Describes this
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 2
    to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. • Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 3
    For Safety Key to Symbols The symbols in this manual are identified by their level of importance, as defined below. Read the following carefully before handling the product. You must follow warnings carefully to avoid
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 4
    Do not connect the cables in ways other than those specified in the manuals. Different connections may cause equipment damage or fire. • Do not block spills into this product, immediately unplug the AC cable, and contact qualified service personnel. Continued use may lead to fire or shock. • Do not
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 5
    Excessive humidity and dust may cause paper jams and other problems, such as fire, or electric shock. • Be • Be careful of the cutter blades of the printer. • Make sure that the total power requirements by checking the descriptions on the devices or manuals. Do not use a device whose rated current
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 6
    own judgment on this product's suitability after a full evaluation. Open Source Software License This product uses open source software in addition to Epson proprietary software. For information of the open source software used in this product, see the following URL. http://xxx.xxx.xxx.xxx/licenses
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 7
    1 Product Overview Chapter 2 Setup Chapter 3 Printer Functions and Settings Chapter 4 Windows Settings Chapter 5 TM-DT Software System Development Chapter 6 PC-POS System Development Chapter 7 Handling Chapter 8 Replacement of the TM-T70II-DT Appendix Product Specifications 7
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 8
    License 6 ■ About this Manual ...7 Aim of the Manual ...7 Manual Content ...7 ■ Contents...8 Product Overview 13 ■ Features ...13 Features of the POS Terminal (Controller) ...13 Printer Features...13 ■ Product Configurations ...14 Models...14 Accessories ...14 ■ Part Names and Functions 15 Main
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 9
    Self-test Mode ...44 NV Graphics Information Print Mode...45 Receipt Enhancement Information Print Mode ...45 Software Setting Mode ...46 Hexadecimal ...52 TM-DT Software System Development 53 ■ Systems that Use TM-DT software 53 Software Configuration ...53 Network Printer Control...54
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 10
    Web service function 98 Settings - Admin settings - Admin information - Admin information 98 Settings - Admin settings - Admin information - Password 99 ■ TM-DT Software Specification 100 Controllable printer...100 ■ Software and Manuals ...101 Systems that Use TM-DT software...101 Utility
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 11
    POS System Development 103 ■ System Configuration...103 System Configuration Figure ...103 Peripheral Devices ...104 ■ How to Control Peripherals 105 Printer...105 Cash drawer...105 Customer display...105 Other devices...105 ■ Software and Manuals ...106 Development kit...106 Driver ...107 Utility
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 12
    Product Specifications 118 ■ Controller Specifications 118 ■ Printer Specifications ...120 Printing Specifications...120 Character Specifications ...121 Printable Area ...122 Printing and Cutting Positions ...123 Paper Specifications ...124 ■ Power supply capacity for external devices
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 13
    (A model without an OS is also available.) • Can control POS peripheral devices using TM-DT software Printer Features The printer has the following features. • Front access operation for paper ejection • Thermal receipt printer • High speed printing: 250 mm/s maximum • Print resolution: 180x180
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 14
    (differs depending on the destination) • Connector cover • Connector cover (Bottom) • Power button cover • Roll paper • Screws x2 (Connector cover) • Manual CD • Product warranty (differs depending on the destination) Options • Windows10 Recovery DVD (OT-RD01): Windows model • SSD module (OT-SS032
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 15
    Part Names and Functions Main Unit Front 1 Chapter 1 Product Overview 7 1 2 6 3 5 4 1 holding this button with a paper-clip or other pointed object until the 3 Printer reset button printer LED turns off resets the printer. This does not turn off the power for this product, and it
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 16
    Controller LED This displays the controller status. Chapter 1 Product Overview (3) Storage Access LED (1) Status LED (Blue) (2) Status LED (Orange) (Blue) Product status On Flashing -- (Approx. 1 second intervals) On Off -- Starting up Updating software Power on (Normal) 1 Flashing
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 17
    LED This displays the printer status. For details see "Status and Errors" on page 35. Chapter 1 Product Overview LED LED status Description (3) Paper (Paper) LED (Orange) On Flashing Off Roll
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 18
    Connect an external speaker here. 5 Ethernet port Connect the LAN. Connect external devices with USB interface here. 6 USB3.0 ports (Type A) Supports USB 3.0 and can connect up to 6 devices. Dedicated for charging tablets, etc. If setting this port to perform communication, 7 USB2.0 port
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 19
    Chapter 1 Product Overview LAN Status LED The LAN status LEDs are the LEDs on the Ethernet port. They indicate the network communication status of this product. 1 2 Status of LED LED Description 1 Active/Link ON (Green) Link is established correctly 1 Flashing (Green) Data transmission /
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 20
    the "TM-DT Software System Development" and "PC-POS" chapters of this guide. Flow of Setup This chapter consists of the following sections along with the setup flow of the product and peripherals. 1. Installing the Printer
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 21
    installed horizontally on a flat surface (not tilted). • Do not place the printer in dusty locations. • Do not knock or strike the Product. This may Do not catch cables and do not place foreign matter under the printer. • Firmly fix the printer so that it does not move when you open or close the
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 22
    does not fit within the specifications shown in the figure below, the following problems may occur. 2 • Cannot set the roll paper in the printer • Cannot cut the paper with the manual cutter Range that manual cutting is possible Area required for loading the roll paper (diameter: 83 mm
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 23
    an enclosed area such as a shelf, secure the following space between the printer and the shelf to avoid heat staying inside. • Top: 15 mm or more • Rear: 130 mm or more • Sides: 50 mm or more (one side
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 24
    Chapter 2 Setup Connecting the AC Adapter Follow the steps below to connect the AC adapter. Be sure to use the specified AC adapter [AC Adapter, T1(Model: M284B)] only. WARNING Be sure to leave a space between the AC adapter and the main unit. 1 Firmly insert the DC connector of the AC adapter all
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 25
    the "DM-D30 Technical Reference Guide". The USB port of the DM-D30 cannot be used. • Systems that use TM-DT software This is enabled using EPSON TMNet WebConfig. • PC-POS System 2 The customer display is directly controlled from the application using Advanced Printer Driver for DM-D, OPOS APD
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 26
    using an optional product for TM printers. • Systems that use TM-DT software The cash drawer is controlled from this product's printer. Configure the printer to use. • PC-POS System The cash drawer is controlled from this product's printer. There is no dedicated driver for the cash drawer you
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 27
    Chapter 2 Setup Drawer kick Connector Circuitry F.G 1 Shielded drawer kick connector 2 Drawer kick solenoid 3 Control device +24 V 4 5 6 Drawer open/close switch Printer side User side [Drawer kick side] 2 27
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 28
    scanners and so on, see the respective product manuals. • Systems that use TM-DT software Set the device ID, control script and so on with EPSON TMNet WebConfig. For details, see "Settings - Web service settings - Key input device" on page 80. • PC-POS System Since it is recognized as a HID device
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 29
    Chapter 2 Setup Attaching/Removing the Connector Cover Attaching the connector cover Be sure to hold both sides of the connector cover when attaching it, or it may become damaged. Follow the steps below to attach the connector cover to protect cables. 1 Align the tab on the connector cover with the
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 30
    . You can also attach bottom cover to hide connectors. Chapter 2 Setup 2 Removing the connector cover Push the connector cover down while pushing the lower part of the both sides of it inward to detach the hooks from the main body. If the connector cover (bottom) is attached, first remove the
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 31
    . 3 Attach the power button cover as shown in the illustration. Align the inside edge of the power button cover with the left edge of the printer reset button. Align the inside edge of the power button cover with the upper edge of the power button
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 32
    Chapter 2 Setup Securing the Product Using the optional affixing tape (Model: DF-10) secures the product to the installation surface. Follow the steps below to use the affixing tape. 1 Turn over the product so that you can see its bottom. 2 With two pieces of the affixing tape combined, peel off
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 33
    Chapter 2 Setup Operating Test You can confirm the connections and settings you made in the following ways. Item Tool Description Printer TM-T70II-DT2 Utility Use the [Operation Check] to perform printing. TMNetWebConfig Use the test print to print the character string of "TEST_PRINT".
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 34
    is online and ready for normal printing unless there is a reason to go offline. Offline The printer automatically goes offline under the following conditions: • While the printer power is turning on/off (Shut down) • While a self-test is running • While roll paper is fed using the Feed button
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 35
    cause of the error, use the methods below to restore the printer to its normal status. Error Error description Error LED flash code 2.56 s Remove the paper jam or the foreign material and then press the printer reset button, close the roll paper cover, or use the ePOSDevice XML error recovery
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 36
    . Contact qualified service personnel. Turn off the power immediately when unrecoverable errors occur. CAUTION Error Error description Error LED flash code Memory R/W error The product does not operate prop- LED ON erly after performing a memory read/ LED OFF write check of the printer memory
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 37
    Power off standing by Error LED OFF OFF OFF OFF ON ON OFF OFF OFF -: Changes depending on whether or not paper is detected. Chapter 3 Printer Functions and Settings Paper LED OFF - Flashing - ON ON OFF OFF 3 37
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 38
    values, see "Software Settings" on page 39. R/E (Receipt Enhancement) Graphics, such as shop logos to be printed on top or bottom of receipts can be registered. Use the TM-T70II-DT2 Utility to register Logo. Maintenance Counter With this function, printer information, such as the number of lines
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 39
    . You can perform settings using the software setting mode by operating the printer panel, or by using the TM-T70II-DT2 Utility or TMNet WebConfig. Item\Method Software Setting Mode TM-T70II-DT2 Utility TMNet WebConfig * Automatic paper reduction ✔ ✔ - Auto paper feed & cut at cover close
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 40
    • Cuts • Does not cut (default setting) Character code table defaults Selectable from 43 pages including user defined page Initial setting: PC437: USA, Standard Europe Chapter 3 Printer Functions and Settings 3 40
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 41
    Chapter 3 Printer Functions and Settings International character defaults Selectable from 18 sets Initial setting: USA Font A auto replacement • Does not replace (default setting) • Font B Font B auto replacement •
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 42
    printer settings and checking items. • Self-test mode • NV graphics information print mode • Receipt Receipt and turn on the printer while pressing the Feed button then hold it down. * Receipt Enhancement Information Press the Feed button cover, and turn on the printer while pressing the Feed button
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 43
    Functions and Settings 2. Mode selection guidance Mode Selection Modes 3 0: Exit and Reboot Printer 1: NV Graphics Information 2: Receipt Enhancement Information 3: Customize Value Settings 4 or more: None Select Modes by executing following procedure. step 1. Press the Feed button less
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 44
    length, number of times of autocutting) Follow the steps below. 1 Close the roll paper cover. 2 While pressing the Feed button, turn on the printer. (Hold down the Feed button until printing starts.) After printing the current print status, a Continuing self-test guidance is printed, and the Power
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 45
    information printing, the Mode selection guidance is printed again. 3 To finish, turn off the power, or select "Exit and Reboot Printer". Receipt Enhancement Information Print Mode You can check the following items using the R/E information mode: • Automatic top logo setting • Automatic bottom
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 46
    Functions and Settings Software Setting Mode Set the printer's memory switches and customized values. • Print density • Auto reduction of amount of paper to use • Enabling/disabling paper autocutting at cover close • Auto replacement of
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 47
    guidance is printed, and the Paper LED flashes. 5 To close Software setting mode, turn off the printer, or select "Exit" to return to Mode selection guidance, and then select "Exit and Reboot Printer". • To select 0 as the item number, hold down the Feed button until printing starts. • If the
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 48
    in hexadecimal numbers and characters. By comparing the print outs and the program, you can check whether or not data is being sent to the printer correctly. • When there are no characters that correspond to the print data, " . " is printed. • If you press the Feed button when there is less than
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 49
    the recovery DVD. 3 When the log-on screen appears, enter the password. For the initial settings, the user name is "EPSON-USER" and the password is "T70II-DT2". 4 The Windows desktop is displayed. Select [Start], then [Control Panel], and [Date and Time]. The "Date and Time Properties" window
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 50
    • Following functions will be stopped, when ePOS-Device Service is disabled. ∗ TM-DT software ∗ TMNet WebConfig 4 ∗ Store/restore settings of this product • You will no longer be able to call TMNet WebConfig from the TM-T70II-DT2 Utility. Speaker Volume Setting Volume of the speakers equipped
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 51
    the Windows setup screen is displayed. 8 When the log-on screen is displayed, enter the password. The initial user name is "EPSON-USER", and the initial password is "T70II-DT2". 9 Select [Start]-[Settings]-[Time & language], and the [Date and Time] is displayed. Set the Date and time, and Time zone
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 52
    rapid_storage_technology EPSON Advanced Printer Driver Ver.5.09 VCPdriver_Ver.2.01 Advanced Printer Driver for DM-D Ver.5.09 TM-DT Software ePOS-Device Ver.5.XX Tool EPSON TMNet WebConfig TM-T70II-DT2 Utility User information (Default) User Name EPSON-USER User Password T70II-DT2 EPSON
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 53
    describes the functions of TM-DT software. Software Configuration TM-T70II-DT2 TM-T70II (Printer) Control program Software Printer driver for Windows TM-DT Software Server Direct Print Device Data Notification Utility EPSON TMNet WebConfig ePOS-Device Service Easy Setup Apache HTTP
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 54
    becomes easy. For controllable network printers, see "TM-DT Software Specification" on page 100. Setting Items Setting Enabling / Disabling for ePOS-Device Service (page 50) Web service (page 78) Network printer (page 79) Items • Enabling ePOS-Device Service • Enabling the Device Control
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 55
    Software System Development Spooler and Forward Printing Spooler A spooler for saving print data and conducting background printing is implemented in the TM-DT software. Even in systems where multiple print jobs are concentrated, an application system can be configured where response is not impeded
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 56
    printing process and executes the next operation. 4 This product successively prints print data A to C. 5 The TM-DT software saves the printing results (JobID, printing result = true) in the log. • If the printer cannot print because it is offline or there is an error, print data cannot be printed
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 57
    is implemented in the TM-DT software. You can configure a secure system that enables printing to be performed on a separate printer even if one printer cannot be used. All you need to do is specify the forwarded printer in the case where printing cannot be performed to EPSON TMNet WebConfig. There
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 58
    [JobID, Print result = false, Error code = Printer status] • Printing or print forwarding: [JobID, the log storage area is cleared. For detail, see "TM-DT Software Specification" on page 100. • When printing cannot ePOS-Device Service (page 50) • Enabling ePOS-Device Service Web service (page 78
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 59
    Chapter 5 TM-DT Software System Development Spooler and Print Forwarding This section explains the print enabled Print forwarding (8) Printing complete 5 Reprint (6) Printing failed Secondary Printer print processing Printing succeeded Print forwarding message (10) Reprint (6) Printing
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 60
    TM-DT Software System Development When spooler is disabled 1: If printing is successful, [JobID, Print result = true] is returned to the application. 2: If printing fails, [JobID, Print result = false, Error code = Printer ) in EPSON TMNet WebConfig. For detail, see "Settings - Web service settings -
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 61
    files control OPOS-specification peripherals. For controllable POS peripherals, device control script files, and device control program files, see the Epson ePOS SDK and ePOS-Device XML User's Manuals, and the TM-DT Series Peripheral Device Control Guide. Device control script file The following
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 62
    Chapter 5 TM-DT Software System Development Setting Items Setting Enabling / Disabling ePOS-Device Service (page 50) Web service (page 78) Customer ) Device control program - Add/delete (page 83) Items • Enabling ePOS-Device Service • Enabling the Device Control • Use / Do not use • Device ID •
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 63
    for exchanging data between applications. The communication box can be set and used from applications compatible with Epson ePOS SDK and ePOSDevice XML. This can be used in TM-DT software Ver.2.5 or later. Communication Box Mechanism -App1 -App2 -App1 -App2 The
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 64
    Software notify the barcode data to App2. 3 App2 acquire the barcode data, then convert to POS data. 4 App2 sends display data to communication box of TM-DT Software. 5 TM-DT Software notify the data is stored into communication box to App1. 6 App1 acquire the stored display data from communication
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 65
    System Development System Configuration Using the TM-DT Software System Configuration • Systems that implemented application in the smart device Using Epson ePOS SDK Application • Web application system Using Epson ePOS SDK Browser Application Database • Server Direct Print system Application
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 66
    issues a print request to the Web server application. 2 The Web server application sends a response that includes print data to the TM-DT 5 software. 3 The TM-DT software sends print data to the printer and performs printing. 4 The software notifies the printing results to the application. 66
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 67
    print data in the responses to requests from the TM-DT software Setting Items Setting Enabling / Disabling ePOS-Device Service (page 50) Web service (page 78) Server direct print (page 86) Status notification (page 87) Network printer (page 79) Proxy settings (page 90) Items • Enabling ePOS
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 68
    a device directly from the Web server and notifying the control results to the application is implemented in the TM-DT software. The Web server application can control the printer and device designated simply by including print data or device control data in the response. You can configure
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 69
    for including device control data in response to requests from the TM-DT software Setting Items Setting Items Enabling / Disabling ePOS-Device Service (page 50) • Enabling ePOS-Device Service Web service (page 78) • Enabling device control • Enabling device data notification Device data
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 70
    implemented in the TM-DT software. Utilizing Epson ePOS SDK, you can easily configure an application system using API for controlling POS peripherals and printers. Setting Items Setting Items Enabling / Disabling ePOS-Device Service (page 50) • Enabling ePOS-Device Service Web service (page 78
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 71
    this product's POS peripherals and network printers from Web applications is implemented in the TM-DT software. You can also shut this product down from Web applications. Moreover, you can print images that are drawn on HTML5 Canvas from a HTML5-compatible Web browser. Using the Epson ePOS SDK for
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 72
    from Socket Communication Compatible Applications A function for controlling this product's POS peripherals and network printers from applications compatible with Web services is implemented in the TM-DT software. There is no need to install drivers and plug-ins to terminals. Through using the ePOS
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 73
    system which mounts the server-side scripting (Perl or php) Web contents on the Apache HTTP Server, which is the operating environment for the TM-DT software. You can also use the SQLite database. Moreover, you can configure an automatic update system of Web contents for automatically updating Web
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 74
    png js *.js sample *.html Register the prepared Web content file to TM-DT Software. Setting Items Setting Enabling / Disabling ePOS-Device Service (page 50) Web content update (page 85) Web service (page 78) Items • Enabling ePOS-Device Service • Register the web content • Web server settings for
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 75
    WebConfig to set the TM-DT software. Each section describes the items that are displayed from [Information] and [Settings] of EPSON TMNet WebConfig. Starting EPSON TMNet WebConfig Start EPSON TMNet WebConfig by the following method. If ePOS-Device Service is invalid, EPSON TMNet WebConfig will not
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 76
    Chapter 5 TM-DT Software System Development Information - Current status You can check the basic location for this product. We b s e r v i c e Web service function function Displays whether the Web service function is enabled or not. Status of Web content update Automatic update for Web
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 77
    Chapter 5 TM-DT Software System Development Information - System settings - Network You can check / restore settings, displaying whether or not proxy is used. 5 Update Web service Update web service function, displaying whether or not proxy is functions used. Device Data Notification Device
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 78
    Server Displays the address set as a time server. Settings - Web service settings - Startup settings Performs the settings for the Web services that are provided with the TM-DT software. Item Description Web service function Device control Enables or disables device control functions that
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 79
    Chapter 5 TM-DT Software System Development Settings - Web service settings - Printer Performs the settings for printers controlled by TM-DT Software. You can set the printers when you have set [Enable] under [Device control] in the "Settings - Web service settings - Startup settings" on page 78.
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 80
    - Key input device Performs the settings for the key input device controlled by TM-DT Software. You can set the key input devices when you have set [Enable] under [Device control] in the "Settings - Web service settings - Startup settings" on page 78. Item Description Key input devices to Device
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 81
    Device Performs the settings for serial communication devices controlled by TM-DT Software. You can set the serial communication devices when you have set [Enable] under [Device control] in the "Settings - Web service settings - Startup settings" on page 78. Item Description Serial communication
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 82
    registered devices Displays other devices registered on this product. Settings - Web service settings - Control script - Add/delete Performs registration or deletion for device control scripts used by TM-DT Software. Item Description Control script to be registered Set the control script
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 83
    settings for devices controlled by TM-DT Software. You can set the devices when you have set [Enable] under [Device control] in the "Settings - Web service settings - Startup settings" . For methods of developing device control programs, see the "TM-DT Series Peripheral Device Control Guide". 83
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 84
    Chapter 5 TM-DT Software System Development Settings - Web service settings - Print Settings - Spooler Performs settings for spooler and print forwarding. You can set the spooler and print forwarding when you have set [Enable] under [Spooler] in the "Settings - Web service settings - Startup
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 85
    Chapter 5 TM-DT Software System Development Settings - Web Service settings - Web Content - Update settings Performs settings settings are registered on this product, the Web content will be updated. Manual update Web content file (*.zip) Specifies the registered Web content. Upload Uploads
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 86
    Chapter 5 TM-DT Software System Development Settings - Web service settings - Server access - Direct Print Performs settings for server direct print. You can set the server direct print when you have set [Enable] under [Server Direct Print] in the "Settings - Web service settings - Startup
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 87
    Chapter 5 TM-DT Software System Development Settings - Web Service settings - Server access - Status notification Performs settings for status notification. You can set the status notification when you have set [Enable] under [Status Notification] in the "Settings - Web service settings - Startup
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 88
    TM-DT Software System Development Settings - Web Service settings - Server access - Device Data Notification Performs settings for device data notification. You can set the device data notification when you have set [Enable] under [Device Data Notification] in the "Settings - Web service settings
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 89
    Chapter 5 TM-DT Software System Development Settings - System settings - Network - TCP/IP Sets Get IP Address] is set to [Manual]. Sets the subnet mask when [Get IP Address] is set to [Manual]. Sets the default gateway when [Get IP Address] is set to [Manual]. Sets the method of getting the address
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 90
    Chapter 5 TM-DT Software System Development Settings - System settings - Proxy settings Performs settings for this product's proxy and the services that use the proxy. Item Description Proxy URL Input the URL for the proxy server in use. Proxy port no. Input the port number for
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 91
    Chapter 5 TM-DT Software System Development Settings - System settings - Date and time - to perform password authentication for shutdown protection from an application compatible with ePOS-Device XML or Epson ePOS SDK for JavaScript. It can be selected when "Shutdown permission" is "Permit". 5
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 92
    - Admin settings - Maintenance - Store restore settings Stores and restores various settings for TM-DT Software. The stored data is not only used for restoring the product, but is also used to create a TM-T70II-DT2 with the same settings. Item Description Auto backup/ Auto restore settings Auto
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 93
    the list. Select when restoring this product using a setting files stored on a Web server. Sets the ID for identifying the setting file for restoring the TM-DT software settings on the Web server side. This ID becomes the user ID used for Digest authentication. The set value is also passed as the
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 94
    Chapter 5 TM-DT Software System Development Restored items Items to be restored in the [Restore Data Notification • Automatic register / delete of key input device • Spooler Available Registered device Printer • Device ID • Type • Model no. • IP address • Retry interval Available Customer
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 95
    Chapter 5 TM-DT Software System Development Item Availability Print settings Spooler • Spooler settings • Forwarding message • Print forwarding route Available Web content Automatic update settings • Update schedule • ID • Password •
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 96
    Chapter 5 TM-DT Software System file / setting file URL • ID • Password • Server authentication Available Update web service func- • Specify the local file to use / Specify the file tion URL Password • Password Not available Printer setting • Printer settings • Logo data registered
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 97
    Settings - Admin settings - Maintenance - Initialization Initializes the Web service settings for TM-DT Software. Item Description Initialize Initializes the Web service settings. If you initialize the Web service, the password for EPSON TMNet WebConfig will also be initialized. The initial
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 98
    System Development Settings - Admin settings - Maintenance - Update Web service function Updates and sets the Web service function of TM-DT Software. The latest version TM-DT software can be used through renewing the Web service functions. Item Description Specify a local file Select when
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 99
    Chapter 5 TM-DT Software System Development Settings - Admin settings - Admin information - Password Sets the password for launch for EPSON TMNet Webconfig. Item Description Old password Input the current password. New password Input the new password. New password (Reenter to confirm) For
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 100
    , or UB-R04 • TM-L90 • TM-T20II • TM-T70 • TM-T70II • TM-T88V • TM-T90 • TM-T90II • TM-T90KP • Following TM printers (Wi-Fi model) • TM-P20 • TM-P60II • TM-P80 • Following TM-Intelligent Printers • TM-T70II-DT • TM-T70II-DT2 • TM-T88V-DT • TM-T88VI-DT2 Number of printers 20 at maximum
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 101
    describing the method for controlling peripherals Control Guide with TM-DT series printers. It explains device control programs and scripts. ✔ - This manual is included in the Epson ePOS SDK package. ePOS-Device XML User's Manual Manual describing the method for transmitting XML data from
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 102
    Utility Software TM-T70II-DT2 Utility Related Manuals Manual DM-D110/ DM-D210 Technical Reference Guide DM-D30 Technical Reference Guide Chapter 5 TM-DT Software System Development Descriptions Windows-compatible application that performs printer settings, network settings, and TM-DT software
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 103
    System Development This chapter describes the information necessary to develop a PC-POS system. System Configuration You can install a POS application and drivers on this product and connect peripheral devices to create a simple POS system. You can also construct a system using an existing Windows
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 104
    -T70II) with a local con- nection. USB TM printer with a local connection. Ethernet Network printer. U S B ( s a m e a s t h e Controlled via the product's printer. product's printer) COM3 * Connects to a USB connector but is recognized as a virtual COM port by the COM-USB conversion driver
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 105
    How to Control Peripherals Chapter 6 PC-POS System Development Printer Control can be performed using the following development kits or drivers. • EPSON OPOS ADK • EPSON OPOS ADK for .NET • EPSON Advanced Printer Driver Cash drawer Printer development kits and drivers include the control function.
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 106
    support application development. As these are not included in the product, they must be downloaded before use. Software Overview EPSON OPOS ADK EPSON OPOS ADK for .NET EPSON JavaPOS ADK This OCX driver can control POS divides software into part blocks. The OPOS driver is presupposed to be
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 107
    An Epson customer display common driver is available. This driver is installed in this product. Utility Software TM-T70II-DT2 Utility Overview This is a Windows-compatible application for performing printer settings for this product. It is already installed in this product. Related Manuals Manual
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 108
    Chapter 7 Handling Handling This chapter describes basic handling of the printer. Turning Power On/Off CAUTION • If you turn the product off, wait more than 10 seconds before you turn it on again. • When the product
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 109
    Chapter 7 Handling Functions of the Power button The functions of the power button when this product is on or in sleep mode can be set on the OS. Power status of this product before the power button is pressed Time the power button is pressed Operation of this product after the power button is
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 110
    with your hands when installing or replacing the roll paper. Otherwise, you may be injured because the manual cutter blade is sharp. • Use roll paper that meets the printer specification. For details about paper specification, see "Paper Specifications" on page 124. • Paper must not be pasted
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 111
    4 Pull out some paper, and close the roll paper cover. Chapter 7 Handling 5 Tear off the paper. 7 111
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 112
    Chapter 7 Handling Removing Jammed Paper CAUTION Do not touch the thermal head because it can be very hot after printing. Thermal head When a paper jam occurs, never pull out the paper forcibly. When paper is jammed, never pull out the paper forcibly. Open the roll paper cover"Installing and
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 113
    such solvents. Doing so may damage or break the parts made of plastic and rubber. Cleaning the Thermal Head Epson recommends cleaning the thermal head periodically (generally every 3 months) to maintain receipt print quality. Turn off the printer, open the roll paper cover, and clean the thermal
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 114
    Chapter 7 Handling Preparing for Transport Follow the steps below to transport the printer. 1 Operate the power button to turn the power off. 2 Remove the DC connector of the AC adapter, display, keyboard, mouse, and any peripheral devices. 3 Remove the roll paper. 4 Pack the printer upright. 7 114
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 115
    Replacement of the TM-T70II-DT Replacement of the TM-T70II-DT The TM-T70II-DT2 is designed so that it can smoothly replace the TM-T70II-DT. This chapter describes precautions for the replacement. Comparison of Product Specifications TM-T70II-DT2 TM-T70II-DT Base printer CPU TM-T70II (Max.250mm
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 116
    Chapter 8 Replacement of the TM-T70II-DT Product power consumption OS TM-T70II-DT2 9.1 W (when standby) /78.9 W (when printing) Windows 10 IoT Enterprise 2016 LTSB 64bit TM-T70II-DT N2600/N2800 13 W (when standby)/ 47 W (when printing) D2550 13 W (when standby)/ 47 W (when printing) Windows
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 117
    Chapter 8 Replacement of the TM-T70II-DT Compatibility The TM-T70II-DT2 printer unit is the same as that of the TM-T70II-DT. The print speed, paper area, and other specifications are the same. Therefore, you can get the same print results without performing any special settings on
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 118
    Specifications This chapter describes the TM-T70II-DT2 product specifications. Controller Specifications CPU) SATAIII SSD M.2 type 2242 (32 GB or more) 10Base-T/100Base-TX/1000Base-T 1port (RJ-45) Supports the Wake On LAN and network boot functions. USB 3.0 6 ports (Type A) USB 2.0 2 ports (Type
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 119
    Product Specifications Item Intel® Core ™ i5 model Intel® Core ™ i3 model Intel® Celeron® model Printer unit Base printer TM-T70II Printing method Direct thermal line thermal printing Speed 250 mm/s Dot density 180 × 180 dpi Paper width 80mm {3.15"} Software BIOS AMI Aptio V OS
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 120
    Specification Thermal line printing 180 × 180 dpi Unidirectional with friction feed (Reverse feed is not supported.) 72.0 mm (2.83"), 512 dots 42 56 250 mm/s 4.23 mm {1/6"} dpi: dots per inch *: when the printer prints text (built-in fonts) with the default print density level at 25°C {77°F}. Print
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 121
    Product Specifications Character Specifications Items Number of characters Character structure (W x H dots) ANK font A ANK font B Character size (W x H) ANK font A ANK font B Barcode/ two-dimensional symbol/ composite symbol printing Specification Alphanumeric characters: 95 Extended
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 122
    Product Specifications Printable Area 80 mm paper width printing The printable area of paper with a width of 79.5 ± 0.5 mm {3.13 ± 0.02"} is 72.2 ± 0.2 mm {2.84 ± 0.008"} (512 dots), and the space on the right and left sides is approximately 3.7 mm {0.15"}. Roll paper width 79.5±0.5 mm {3.13±0.02"}
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 123
    Printing and Cutting Positions Manual-cutter position Autocutter blade position Approx. 13 Product Specifications Last line of a previous receipt Approx. 30 Center of the print dotline Printable area Paper feed direction [units: mm (All the numeric values are typical.)] • The values above may
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 124
    83 mm {3.27"} maximum Inside: 12 mm {0.47"}, Outside: 18 mm {0.71"} 80 + 0.5/-1.0 mm 79.5 ± 0.5 mm Epson Certified Media List for Thermal Receipt Printers ☞ www.epson-biz.com/?content=sht_tm_media P30521, P30523, P31523, P35524 (Kanzaki Specialty Papers) AF50KS-E (Jujo Thermal Oy) F5041 (Mitsubishi
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 125
    Product Specifications Power supply capacity for external devices Port Power supply Supply capacity USB 3.0 Type A * USB 2.0 Type A * USB 2.0 Type-C * Drawer HDMI DC +5 V DC +5 V DC +5 V DC +24 V DC +5 V 900 mA each 500 mA 3 A 1 A 100 mA ∗ The current capacity that can be supplied by USB
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 126
    , P35524 [°C] Elevation Acoustic noise 3000 m or less When printing: 55 dB When standby: 42 dB Note: The values above are measured in the Epson evaluation condition. Acoustic noise differs depending on the paper used, printing contents, and the setting values, such as print speed or print density
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 127
    MTBF MCBF Item Controller Printer AC adapter Printer Parts with limited Controller lifespan Printer RTC Specification 169,000 hours temperature of 40°C) Lithium primary battery (for RTC): Around 5 years Printer mechanism: Thermal head: Autocutter: 17 million lines (printing) 120 km
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 128
    External Dimensions • Width: • Depth: • Height: 172 mm {6.77"} 290 mm {11.42"} (including connector cover) 114 mm {4.49"} Product Specifications 128
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 129
    AC Adapter Specifications 35 200 85 1500 210 33.5 Product Specifications 6.5 24.3 Input conditions Output conditions Item Input voltage Frequency Input current (rating) Output voltage (rating) Output current (rating) 55 145 [Units: mm] 60 Specification AC 100 V to 240 V 50/60 Hz 2.4 A DC
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 130
    Interface Product Specifications USB 3.0 port Item Compliant standards Number of ports Connector Bus power (Bus power is output even at Sleep) Functions of each connector pin Pin No. Signal 1 VBUS 2 D- 3 D+ 4 GND 5 SSRX- 6 SSRX+ 7 GND 8 SSTX- 9 SSTX+ I/O -I/O I/O -I I -O O
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 131
    Product Specifications USB 2.0 port (Type A) Item Compliant standards Number of ports Connector Bus power (Bus power is output even at Sleep) Functions of each connector pin Pin No. Signal 1 VBUS 2 D- 3 D+ 4 GND I/O -I/O I/O -- USB 2.0 Specification 1 ports Type A 5V, 500mA
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 132
    ) A12 GND -- GND B1 GND -- GND Ethernet port Item Compliant standards Number of ports Connector Specifications 10Base-T/ 100Base-TX/ 1000Base-T IEEE 802.3 1 ports RJ-45 Supports the Wake On LAN and network boot functions. 132
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 133
    254.*.*) will be set by APIPA. ∗2 Default value when [Get IP address] is set to [Manual]. ∗3 Default value when [Acquire DNS Server Address Automatically] is set to [Disable]. Line-out port to this jack, output to the internal TM-T70II-DT2 speaker is instead sent to the external speaker. 133
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 134
    Product Specifications Serial port Item Number of ports Connector Female screw Maximum Communication speed Functions of each connector pin Pin No. Signal 1 N.C. 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 N.C. I/O -I O O -I O I -- Specifications 1 port DSUB 9-pin male
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 135
    GND 11 N.C. 12 DDCDATA 13 HSYNC 14 VSYNC 15 DDCCLK I/O O O O -----I/O O O I/O Specifications VESA Video Signal Standard (VSIS) Version 1, Rev.2 Compliant Support DDC communication (+5V level I2C interface) 1920 x 1200 dots /60Hz 1 port DSUB 15-pin female Description Red data Green data
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 136
    ) GND (TMDS data 0 shield) TMDS data channel 0 (DDI0_TXN2) TMDS clock (DDI0_AUXP) GND (TMDS clock shield) TMDS clock (DDI0_AUXN) Not supported Not supported HEC function I²C serial clock for DDC (DDI0_DDC_CLK) I²C serial data for DDC (DDI0_DDC_DATA) GND +5 V, 100mA (disabled on S3 State) Hot plug
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 137
    Product Specifications Drawer kick connector Item Compliant standards Number of ports Drawer side connector Specifications RJ12 6pin 1 port RJ12 telephone jack (6-position 6-contact) Functions of each connector pin Pin No. Signal 1 Frame GND 2 Drawer kick drive signal 1 3 Drawer open/
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 138
    you do not want to save settings, or select "Save Changes and Reset" if you do want to save the settings. 2 Follow the on-screen instructions and select [Yes]. 3 BIOS Setup ends and this product starts up. Settings for the USB 2.0 Charging Port By default settings, the USB 2.0 port (Type-C) is
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 139
    [USB Port Disable Override]. 3 Select [Select Per-Pin]. 4 Select the number of the USB port and set it to [Disable]. #5 #4 #3 #2 #1 #7 #8 #0 As USB port #6 is the printer for this product, do not set that to [Disable]. 5 Press [F4] to save the settings. 139
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 140
    Sub Board MAC BIOS Information BIOS Vendor Core Version Project Version Model Access Level System Date System Time Type ID Speed L1 Data Cache L1 Instruction Cache L2 Cache L3 Cache L4 Cache VMX SMT/TXT Microcode Revision DMI/BCLK/PEG/SATA/USB3/PCIe Clock Settings Default Clock Settings Frequency
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 141
    DC/PWM 1 CPUFAN Temperature 2 CPUFAN DC/PWM 2 CPUFAN Critical Temp Tolerance Enable ACPI Auto Configuration Enable Hibernation ACPI Sleep State CSM Support CSM16 Module Version GateA20 Active Option ROM Messages INT19 Trap Response Boot option filter Option ROM execution Launch PXE OpROM Storage
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 142
    USB Configuration USB Module Version USB Controllers: USB Devices: USB Configuration Network Configuration Type-C Port Charge Legacy USB Support XHCI Hand-off USB Mass Storage Driver Support USB hardware delays and time-outs: USB transfer time-out Device reset timu-out Device power-up delay
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 143
    Chipset Security Product Specifications Menu SATA Configuration NVMe Configuration Serial Port Configuration GPIO Configuration USB port Configuration SATA Controller(s) SATA Mode Selection SATA Controller Speed Serial ATA Port 1 Software Preserve Port 1 Serial ATA Port 2 Software Preserve Port 2
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 144
    Physical Presence Spec Version TPM 20 InterfaceType Device Select Quiet Boot Hide Specified Log Fast Boot SATA Support VGA Support USB Support NetWork Stack Driver Support Setup Prompt Timeout Bootup NumLock State AC Power Recovery Notify Battery Error FIXED BOOT ORDER Priorities Boot Option
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 145
    Character Code Tables Refer to the following URL regarding the character code table. www.epson-biz.com/pos/reference/charcode/ Product Specifications 145
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 146
    printer product printer product. If you desire to receive the source code above, please contact the customer support 4 ) OpenSSL toolkit This printer product includes software developed by the of open source software programs included with this printer product and the whole license agreements of each
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 147
    that provide functionality such as mail, calendar, contacts, music and news that are included with and are a part of Windows. If this agreement contains terms regarding a feature or service not available on your device, then those terms do not apply. b. Additional terms. Depending on your device
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 148
    directly to another user's computer, usually to correct problems. (vi) POS application. If the software is installed on a retail point of service device, you may use the software with a point of service application ("POS Application"). A POS Application is a software application which provides only
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 149
    manually by Internet or telephone. In either case, transmission of certain information will occur, and Internet, telephone and SMS service ). Certain updates, support, and other services might only be your name, address, how to contact you, what the problem is, and what you want. A form is available
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 150
    , it's permanently barred. g. Severability. If the class action waiver is found to be illegal or unenforceable as to all or some parts of a dispute, those parts won't be arbitrated but will proceed in court, with the rest proceeding in arbitration. If any other provision of Section 9 is found
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 151
    . Some features of the software and services accessed through the software may require your THE AVC, THE VC-1, AND THE MPEG-4 PART 2 VISUAL PATENT PORTFOLIO LICENSES FOR THE PERSONAL AND programs directly support the manufacturer's specific use for the device, or provide system utilities, resource
  • Epson TM-T70II-DT2 | Technical Reference Guide - Page 152
    SHOULD IT PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL SERVICING OR REPAIR. NEITHER THE DEVICE MANUFACTURER NOR MICROSOFT GIVES ANY EXPRESS AND DIRECT, CONSEQUENTIAL, SPECIAL, INDIRECT, OR INCIDENTAL DAMAGES, UNDER ANY PART OF THIS AGREEMENT OR UNDER ANY THEORY. THIS LIMITATION APPLIES TO (I)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
Technical Reference Guide
Describes features of the product.
Describes setup for the product and peripheral devices
necessary before using this product.
Describes the printer functions and setting items.
Describes the pre-installed Widows settings and
speciļ¬cations.
Describes the requirements for system development using
TM-DT software.
Describes information necessary for developing a PC-POS
system.
Describes how to handle the product.
Describes how to replace the TM-T70II-DT.
Describes this product's speciļ¬cations.
M00112101
Rev. B
Product Overview
Setup
TM-DT Software System Development
Printer Functions and Settings
PC-POS System Development
Handling
Windows Settings
Replacement of the TM-T70II-DT
Product Specifications