Epson VS335W Quick Setup

Epson VS335W Manual

Get Epson VS335W PDF manuals and user guides View all Epson VS335W manuals
Add to My Manuals
Save this manual to your list of manuals

Epson VS335W manual content summary:

  • Epson VS335W | Quick Setup - Page 1
    online User's Guide for instructions. Computer port Connect one end of a VGA cable to the projector's Computer port, and the other end to your computer's monitor port. If you are using a laptop, switch it to external display (see "Troubleshooting"). You can also connect an audio cable. HDMI
  • Epson VS335W | Quick Setup - Page 2
    an Internet connection). If you don't have a User's Guide icon, you can install it from the projector CD or go to the Epson website, as described below. Telephone support services To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your
  • Epson VS335W | Quick Setup - Page 3
    VS330/VS335W Installation rapide Avant d'utiliser le projecteur, assurez-vous de lire les instructions de sécurité dans le Guide de l'utilisateur en ligne. Branchez le projecteur Choisissez parmi les connexions suivantes. Voyez les sections ci-dessous ou consultez le Guide ble audio Câ Epson DC
  • Epson VS335W | Quick Setup - Page 4
    également être étiquetée CRT/LCD ou peut être identifiée par une Guide de l'utilisateur, vous pouvez l'installer à partir du CD tel que décrit dans la section ci-dessous. Services de soutien téléphonique Pour utiliser le service de soutien Epson® PrivateLine®, composez le 1 800 637-7661. Ce service
  • 1
  • 2
  • 3
  • 4
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide
for details.
Computer
USB cable
HDMI cable
VGA cable
Audio cable
USB port
Connect the square end of a USB cable to the projector’s
USB-B
(square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows
®
2000 SP4 or later:
After turning on the projector, follow the
on-screen instructions to install the Epson
®
USB Display software
(EMP_UDSE.EXE;
only on first connection). If the software screen does not
display automatically, open
My Computer
or
Computer
, then double-click
EPSON_PJ_UD
.
Mac OS X 10.5.8 or higher:
After turning on the projector, the setup folder
for USB Display appears in the Finder. Double-click
USB Display Installer
and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Note:
If you have problems installing the USB Display software, make sure the
USB Type B
setting in the projector’s
Extended
menu is set to
USB Display
.
See the online
User’s Guide
for instructions.
Computer port
Connect one end of a VGA cable to the projector’s
Computer
port, and the
other end to your computer’s
monitor port. If you are using a laptop,
switch it to external display (see “Troubleshooting”). You can also connect an
audio cable.
HDMI port
Connect one end of an HDMI cable to the projector’s
HDMI
port and the other
end to an HDMI port on your computer.
Video device
Connect up to 4 video devices and use the
Source Search
button on the
remote control to switch between them.
RCA video cable (composite video)
Component video to VGA cable
S-Video cable
HDMI cable
Audio cable
Camera, USB device, or Epson DC-06 document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-06
document camera to the projector’s
USB-A
(flat) port.
USB cable
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s PC Free feature. See the online
User’s Guide
for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The
power
light on the projector turns blue.
3
Open the
A/V Mute
slide all the way.
4
Press the
power button on
the projector or remote control.
The projector beeps, the Status
light flashes blue, and then
stays on.
Note:
To shut down the projector, press the
power button twice, then
unplug it. You don’t have to wait for the projector to cool down.
5
The default language of the menu system is English. To select another
language, press the
Menu
button on the projector or remote control.
Select
Extended
and press
Enter
. Select
Language
and press
Enter
.
Select your language and press
Enter
.
Press the
Menu
button to exit the
menu system.
Adjust the image
1
If you don’t see an image, press the
Source Search
button on the
projector or remote control to select the image source.
Note:
If you still see a blank screen or have other display problems, see
the troubleshooting tips on the right.
2
To raise the image, press the
foot release button and lift
the front of the projector.
Release the button to lock
the foot in position.
VS230/VS330/VS335W
*412526500*
*412526500*