Epson VS355 Quick Setup and Warranty
Epson VS355 Manual
 |
View all Epson VS355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson VS355 manual content summary:
- Epson VS355 | Quick Setup and Warranty - Page 1
differ from the illustrations on this sheet, but the instructions are the same. Connect the projector Choose from the following connections. See the sections below or the online User's Guide for details. Computer USB cable HDMI cable VGA cable Audio cable Computer port Connect one end of a VGA cable - Epson VS355 | Quick Setup and Warranty - Page 2
projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting projector, use the horizontal keystone slider on the projector to correct the image shape. VS250 VS350 VS355 6 Your projector CRT/LCD or - Epson VS355 | Quick Setup and Warranty - Page 3
desktop to access the online manual (requires an Internet connection). If you don't have a User's Guide icon, you can install it from the projector CD or go to the Epson website, as described below. Telephone support services To use the Epson PrivateLine® Support service, call (800) 637-7661. This - Epson VS355 | Quick Setup and Warranty - Page 4
Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark and Epson Connection is a service mark of Epson America, Inc. Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries. General Notice: Other product names used
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Note:
Your product may differ from the illustrations on this sheet, but the
instructions are the same.
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide
for details.
Computer
USB cable
HDMI cable
VGA cable
Audio cable
Computer port
Connect one end of a VGA cable to the projector’s
Computer
port, and the
other end to your laptop or computer’s
monitor port. Make sure to switch
your laptop to external display (see “Troubleshooting” on this sheet). You can
also connect an audio cable.
HDMI port
Connect one end of an HDMI cable to the projector’s
HDMI
port and the other
end to an HDMI port on your computer.
USB port
Connect the square end of a USB cable to the projector’s
USB-B
(square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows Vista
®
or later:
After turning on the projector, follow the on-screen
instructions to install the Epson
®
USB Display software (
EMP_UDSE.EXE
; only
on first connection). If the software screen does not display automatically, open
My Computer
or
Computer
, then double-click
EPSON_PJ_UD
.
OS X 10.7.x or higher:
After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click
USB Display Installer
and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Video device
Connect multiple video devices and use the
Source Search
button on the
projector or the remote control to switch between them.
Component video
to VGA cable
HDMI cable
RCA video cable
(composite video)
RCA audio cable
USB device
Connect a digital camera, USB flash drive, or USB storage device to the
projector’s
USB-A
(flat) port.
USB cable
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s PC Free feature. See the online
User’s Guide
for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The power light on the projector turns blue.
3
Open the A/V Mute slide all the way.
4
Press the
power button on the projector or remote control. The
projector beeps, the Status light flashes blue, and then stays on.
Note:
To shut down the projector, press the
power button twice.
5
Use the arrow buttons on the remote control to highlight any of the
options on the Home screen that appears, then press
to select it.
You can switch between projection sources and quickly access various
adjustment options from this screen.
6
The default language of the menu system is English. To select another
language, press the
Menu
button on the projector or remote control.
Select
Extended
and press
. Select
Language
and press
. Select
your language and press
. Press the
Menu
button to exit the menu
system.
VS250/VS350/VS355