Epson VS410 Start Here

Epson VS410 Manual

Epson VS410 manual content summary:

  • Epson VS410 | Start Here - Page 1
    VS350W/VS410 Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Connect the projector Choose from the following connections. See the sections below or the online User's Guide for details. Computer VGA cable Turn on your equipment 1 Turn on
  • Epson VS410 | Start Here - Page 2
    on and off Choose which source to display Access projector menus Navigate projector menus Turn off projector display Get solutions to common problems For more information on using the remote control, see the online User's Guide. Troubleshooting If you see a blank screen or the No signal
  • Epson VS410 | Start Here - Page 3
    VS350W/VS410 Installation rapide Avant d'utiliser le projecteur, assurez-vous de lire les instructions de sécurité dans le Guide de l'utilisateur en ligne. Branchez le projecteur Choisissez parmi les connexions suivantes. Consultez les sections ci-dessous ou consultez le Guide logiciel Epson USB
  • Epson VS410 | Start Here - Page 4
    tre étiquetée CRT/LCD ou peut être Guide de l'utilisateur, vous pouvez l'installer à partir du CD du projecteur ou aller sur le site Web d'Epson, tel que décrit dans la section ci-dessous. Services de soutien téléphonique Pour utiliser l'assistance technique Epson Web www.epson.ca/support pour
  • 1
  • 2
  • 3
  • 4

Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide
for details.
Computer
VGA cable
USB cable
USB Port
Connect the square end of a USB cable to the projector’s
USB
TypeB
(square) port. Connect the flat end of the cable to any USB port on your
computer.
Windows
®
2000 SP4 or later:
After turning on the projector, follow
the on-screen instructions to install the Epson USB Display software
(
EMP_UDSE.EXE
; only on first connection).
Note:
If the software screen does not display automatically, open
My
Computer
or
Computer
, then double-click
EPSON_PJ_UD
.
Mac OS
®
X 10.5.1 or higher:
After turning on the projector, the setup folder
for USB Display appears in the Finder. Double-click
USB Display Installer
and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Monitor Port
Connect one end of a VGA cable to the projector’s
Computer
port, and the
other end to your computer’s
monitor port. If you are using a laptop,
switch it to external display (see “Troubleshooting”). You can also connect an
audio cable.
Video Device
Connect up to 3 video devices and use the remote control to switch
between them.
RCA video cable (composite video)
Component video to VGA cable
S-Video cable
Audio cable
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The power light on the projector turns orange.
3
Open the
A/V Mute
slide all the way.
4
Press the
power button on the projector or remote control. The
projector beeps, the power light flashes green, and then stays on.
Note:
To shut down the projector, press the
power button twice, then
unplug it. You don’t have to wait for the projector to cool down.
5
The default language of the menu system is
English
. To select another
language, press the
Menu
button on the remote control. Select
Extended
and press
Enter
. Select
Language
and press
Enter
. Select
your language and press
Enter
.
Press the
Menu
button to exit the menu
system.
Adjust the image
1
If you don’t see an image, press the
Source Search
button on the
projector or remote control to select the image source.
Note:
If you still see a blank screen or have other display problems, see the
troubleshooting tips on the right.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
Turn the zoom ring to reduce or enlarge the image.
W
T
VS350W/VS410
*412125900*
*412125900*