Epson WorkForce 600 Start Here
Epson WorkForce 600 - All-in-One Printer Manual
 |
View all Epson WorkForce 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson WorkForce 600 manual content summary:
- Epson WorkForce 600 | Start Here - Page 1
place over corresponding text on the control panel. Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. If anything is missing, contact Epson as described on the back under "Any questions?". Remove all protective - Epson WorkForce 600 | Start Here - Page 2
select AM or PM. 9 Press OK when done. Note: You can change the date and time settings by pressing the Home button, selecting Setup, selecting Printer Setup, then selecting Date/Time. - Epson WorkForce 600 | Start Here - Page 3
OK button to charge ink. Charging takes about 2 minutes. Note: Your WorkForce 600 Series ships with full cartridges and part of the ink from the first cartridges is used for priming the WorkForce 600 Series. Caution: Don't turn off the WorkForce 600 Series while the ink system is initializing or - Epson WorkForce 600 | Start Here - Page 4
5 Load paper 1 Open the paper support and pull out the extension. 2 Extend the output tray and raise the stopper. Note: If you are using legal-size paper, do not raise the stopper. 3 Flip the feeder guard forward, then squeeze the edge guide and slide it to the left. 4 Load paper against the right - Epson WorkForce 600 | Start Here - Page 5
for faxing, connect the included phone cord from a telephone wall jack to the LINE port on the WorkForce 600 Series. To connect a telephone or answering machine, see the Quick Guide for instructions. Note: If you're connecting to a DSL phone line, you must use a DSL filter or you won't be able - Epson WorkForce 600 | Start Here - Page 6
fax! See your Quick Guide or on-screen Epson Information Center. Macintosh® 1 Make sure the WorkForce 600 Series is NOT CONNECTED to your computer. 2 Insert the WorkForce 600 Series software CD. 3 Double-click the Epson icon. 4 Click Install and follow the on-screen instructions. 5 When you see this - Epson WorkForce 600 | Start Here - Page 7
troubleshooting advice, and software downloads. You can also purchase paper and ink. Network Installation Guide Instructions on configuring the WorkForce 600 Series for a network. On-screen help with your software Select Help or ? when you're using your software. Epson Technical Support Internet - Epson WorkForce 600 | Start Here - Page 8
600 Series Ink Cartridges Color Black Standard Capacity 69 High Capacity 68 Extra High Capacity 97 Cyan 69 68 -- Magenta 69 68 -- Yellow 69 68 -- The 68 High Capacity color ink cartridges are available only online; visit www.epson.com/highcapacity (U.S. sales) or www.epson
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
*411556300*
*411556300*
Canada only:
For French speakers, remove sticker(s) from the backing sheet and
place over corresponding text on the control panel.
Caution:
Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
If anything is missing, contact Epson as described on the back
under “Any questions?”.
Remove all protective materials.
Unpack
1
Start Here
(Included for
Canada only)
1
Connect the power cable.
±
Caution:
Do not connect to your computer yet.
2
Lift the control panel to raise it, then press the
On
button.
Turn on
2
Series
Ethernet cable
(gray)
Phone cord
(black)
Power cord