Eureka AirSpeed PRO ALL FLOORS Rewind Pet AS1061A Quick Start Guide
Eureka AirSpeed PRO ALL FLOORS Rewind Pet AS1061A Manual
 |
View all Eureka AirSpeed PRO ALL FLOORS Rewind Pet AS1061A manuals
Add to My Manuals
Save this manual to your list of manuals |
Eureka AirSpeed PRO ALL FLOORS Rewind Pet AS1061A manual content summary:
- Eureka AirSpeed PRO ALL FLOORS Rewind Pet AS1061A | Quick Start Guide - Page 1
Guide. It is designed to help you assemble your vacuum easily. To view an assembly video, go to Eureka.com/videos or scan QR code. If you have questions about your new vacuum, please contact our customer service Easy assembly ! PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving
-
1
 |
 |
What’s in the carton
STEP
1
1
Vacuum cleaner
Handle
Carry handle
Lower hose retainer
Dusting
brush
Crevice
tool
WAND
1
Hose
Turbo holder
Dust
cup
Easy assembly
Remove dust cup
to assemble vacuum.
Place handle on
vacuum; push down
to snap in place.
Slide carry handle into back of
handle. Snap into place.
STEP
2
2
!
PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts! Assemble the vacuum cleaner before using.
Insert top tab
A
turbo holder into handle. Place thumbs on each side
and snap bottom corners
B
into place. Turn
C
knob to lock.
Store turbo nozzle in holder.
Some models:
Snap
D
turbo cover
straight on from front to back.
Empty
dust cup
after
each use.
No screws
or tools
required!
Place lower hose retainer
in slots on back of vacuum.
Push down to snap into place.
To install hose connector,
align tab at right and
snap on at left.
WAND
WAND
2
1
Pull out bottom of lower hose
retainer and position hose.
Place hose over
carry handle.
How to use and clean your vacuum
TOOLS
FLOORS
To vacuum floors, turn
air path knob to ‘floors.’
Pull out cord to desired length.
Do not pull past red line;
push cord into cord clip.
Use foot to adjust height for
carpet or bare floors.
Step on power switch to turn
on; step on again to turn
off.Next, step on handle
release to lower handle into
position.
To store, press switch to
retract cord.
STEP
3
3
!
Power
switch is
marked
for
on-off.
I
Attach tool to end of wand.
Turn air path knob to ‘tools.’
Some models:
Slip wand 2
over wand 1.
Push wand 1 onto end of
hose. Place over bottom
hook; snap in at top.
Store dusting brush and crevice tool on back
of vacuum. Store turbo nozzle in holder
(tools vary by model).
AS1060A- AS1069A Series
THANK YOU FOR PURCHASING YOUR NEW EUREKA VACUUM!
Helpline Hours:
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday
Please take a few moments to read this Quick Start Guide.
It is designed to help you assemble your vacuum easily.
To view an assembly video, go to Eureka.com/videos or scan QR
code.
If you have questions about your new vacuum, please
contact our customer service helpline at
1-800-282-2886
.
We're here to help!
Important safeguards
OWNER’S
GUIDE
3
5
1
8
9
11
7
6
QUICK START GUIDE
Follow
1-11
in order
to ensure
proper
assembly.
4
TOOLS
FLOORS
Snap!
Snap!
10
A
B
Snap!
Air path
knob
Air path
knob
Lock!
D
C
SPECIAL FEATURES
Available on some models
Turbo nozzle
Turbo
cover
Wand 1
Wand 2
WAND
2
2
For quick clean,
tap filter.
Grasp filter and twist to remove from lid.
Shake dust from filter. Remove screen.
Rinse screen and dust cup.
Dry thoroughly
.
Remove dust cup.
Pull filter latch to release
dust cup cover.
Align tab with slot to reinstall screen.
Grasp filter and twist in lid to reinstall.
Align lid at front; press down until lid snaps.
© 201
4
Electrolux Home Care Products, Inc. Printed in China PN
88454
Step on pedal to turn
brushroll on for carpet
and off for bare floors.