Fender Showman 412S Enclosure Owner Manual
Fender Showman 412S Enclosure Manual
 |
View all Fender Showman 412S Enclosure manuals
Add to My Manuals
Save this manual to your list of manuals |
Fender Showman 412S Enclosure manual content summary:
- Fender Showman 412S Enclosure | Owner Manual - Page 1
and is designed for use with the Fender® Cyber-Twin™ Head or other professional quality instrument amplifier. In order to more fully understand the operational characteristics of your Showman® 412S loudspeaker enclosure, please read through all instructions and heed all caution and safety warnings
-
1
 |
 |
Your new Showman
®
412S Loudspeaker Enclosure is constructed from
5/8" (1.6 cm) 11-ply Birch Plywood and is capable of handling up to 300
Watts.
The Showman
®
412S features four 12" (30.5cm) speakers with
54 oz (1.53 kg) magnets and is designed for use with the Fender
®
Cyber–Twin™ Head or other professional quality instrument amplifier.
In
order to more fully understand the operational characteristics of your
Showman
®
412S loudspeaker enclosure, please read through all
instructions and heed all caution and safety warnings on both your
amplifier and Showman
®
412S loudspeaker enclosure.
CONNECTING THE SHOWMAN
®
412S LOUDSPEAKER
ENCLOSURE
Because the Showman
®
412S may be used in either a stereo or monaural
configuration, it it important to make connections from your amplifier to the
412S correctly.
When using a stereo amplifier such as the Fender
®
Cyber–Twin™ Head, connect speaker cables with 1/4 inch plugs from the
right and left speaker outputs to the RIGHT and LEFT 8
Ω
input jacks on the
412S.
Move the switch on the 412S input plate up to the STEREO position.
When using an amplifier with a single monaural output, connect a speaker
cable with 1/4 inch plugs from the speaker output to the RIGHT 16
Ω
input
jack on the 412S.
Move the switch on the 412S input plate down to the
MONO position.
Note that the left input jack
will now be disconnected and unusable.
Note:
If using a tube amplifier, your tube amp
could fall into protect mode or even be
damaged by using an improper impedance
load.
Therefore, it is important to heed all
caution and safety warnings on both your
amplifier and Showman
®
412S loudspeaker
enclosure.
SPECIFICATIONS
PART NUMBER
021-1675-010
DRIVERS
Four 12" (30.5 cm) Steel Frame Drivers
1 3/4" (4.5 cm) Voice Coils
54 oz (1.53 kg) Magnets
CABINET
5/8" (1.6 cm) 11-ply Birch Plywood
SENSITIVITY
96 dB, 1 Watt - 1 Meter
POWER HANDLING
300 Watts
IMPEDANCE
16
Ω
Mono, 8
Ω
/8
Ω
Stereo
CONNECTIONS
1/4" High Current Input Jacks
ENCLOSURE VOLUME
V
B
=
5.2 ft
3
(147 L)
DIMENSIONS
Height:
30 in
(76.2 cm)
Width:
30 in
(76.2 cm)
Depth:
15 in
(38.1 cm)
WEIGHT
99 lb
(45.0 kg)
Product specifications are subject to change without notice.
P/N 057486 REV A
THE FENDER
®
SHOWMAN
®
412S LOUDSPEAKER ENCLOSURE
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.
CORONA, CA USA
Copyright © 2002 FMIC