Fluke 3561/3502 FC Product Manual
Fluke 3561/3502 FC Manual
 |
View all Fluke 3561/3502 FC manuals
Add to My Manuals
Save this manual to your list of manuals |
Fluke 3561/3502 FC manual content summary:
- Fluke 3561/3502 FC | Product Manual - Page 1
3561 FC/3502 FC Vibration Sensor/Gateway Getting Started Manual PN 5020149 July 2018 ©2018 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their respective - Fluke 3561/3502 FC | Product Manual - Page 2
center to obtain return authorization information, then send the product to that Service Center with a description of the problem. THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY - Fluke 3561/3502 FC | Product Manual - Page 3
Contents Introduction 3 Before you install 4 Step 1: Watch the setup video 4 Step 2: Choose the connectivity option 4 Step 3: Setup the network 5 Step 4: Determine asset information 6 Step 5: Record the asset information 10 In-app Setup 11 Step 6: Download and install Fluke Connect 11 Step - Fluke 3561/3502 FC | Product Manual - Page 4
to the user. Symbols used on the Product and in this manual are explained in Table 1. XWWarning To prevent possible electrical shock, • Do not use the Product if it operates incorrectly. • Carefully read all instructions. • Use this Product indoors only. • Have an approved technician repair the - Fluke 3561/3502 FC | Product Manual - Page 5
Item Description Starter/Expansion kits 3502 FC Gateway (In Starter Kit only) Getting Started Manual 3561 FC Vibration Sensors (4) Epoxy (2) Epoxy application instructions Not pictured Software subscription enabled for Sensors (1 year / 3 year) Description Gateway 3502 FC - Fluke 3561/3502 FC | Product Manual - Page 6
3561 FC/3502 FC Getting Started Manual Before you install Important: For a successful setup, follow the sequence in these instructions. Step 1: Watch the setup video To see the system setup and installation, watch the video From the Quick Start page, select 3561 FC Vibration Sensor. - Fluke 3561/3502 FC | Product Manual - Page 7
install Step 3: Setup the network Note Skip this step if you are using mobile router/hotspot for connectivity. For this step, you will need support from your IT team. 1. Obtain the WiFi network name and password. 2. Make sure your network complies with these requirements: WLAN Standards: 802.11 - Fluke 3561/3502 FC | Product Manual - Page 8
3561 FC/3502 FC Getting Started Manual Step 4: Determine asset information Collect information on the asset (equipment) where you are installing the Sensor. Including: • Determine the assets Assets are the equipment being - Fluke 3561/3502 FC | Product Manual - Page 9
Vibration Sensor/Gateway Before you install • Determine the Machine Category Machine category is a critical piece of information required to screen the health of your assets. Choose 1 of the 37 machine categories shown in Table 3. Table 3: Machine Categories Machine Category Pumps Description - Fluke 3561/3502 FC | Product Manual - Page 10
3561 FC/3502 FC Getting Started Manual Machine Category Fans Description Belt-driven fan (1800 to 3600 RPM) Belt-driven fan (600 to 1799 RPM) General direct drive fan (direct coupled) Shaft- - Fluke 3561/3502 FC | Product Manual - Page 11
Machine Category Vibration Sensor/Gateway Before you install Blower Description Lobe-type rotary blower (belt or direct drive) Multi-stage centrifugal blower (direct drive) Cooling Tower Drives Long, hollow shaft (motor) Belt-drive (motor and fan - all arrangements) Direct drive ( - Fluke 3561/3502 FC | Product Manual - Page 12
3561 FC/3502 FC Getting Started Manual Step 5: Record the asset information Create an asset information table. For example, see Table 4. Table 4: Asset Information Asset Group Asset Test Point Sensor ID Machine - Fluke 3561/3502 FC | Product Manual - Page 13
In-app Setup Vibration Sensor/Gateway In-app Setup Important: Complete all steps in this section before you install the Sensor on the asset. Step 6: Download and install Fluke Connect Sign up or sign into the Fluke Connect app. 11 MyFlukeStore Shop for Fluke products online at: www. .com 1.888 - Fluke 3561/3502 FC | Product Manual - Page 14
3561 FC/3502 FC Getting Started Manual Step 7: Complete the in-app setup 1. Start the in-app setup on your phone. 2. Log into the Fluke Connect app. 3. On the Home screen, tap Setup Logging or Monitoring. 4. Follow the in-app instructions to complete the setup. Important: • On your mobile phone, - Fluke 3561/3502 FC | Product Manual - Page 15
the Sensor. • During the in-app setup, the maximum distance between the Gateway and the Sensor must be ≤5 ft (1.5 m). ≤1.5 m (5') ≤10 cm (4″ ) For step-by-step guide on in-app setup, go to: Choose 3561 FC Vibration Sensor and download Step by step inapp setup - Fluke 3561/3502 FC | Product Manual - Page 16
3561 FC/3502 FC Getting Started Manual Sensor Installation Important: After completing in-app setup process, wait for a few minutes until the data appears in the session details page. Step 8: Select the - Fluke 3561/3502 FC | Product Manual - Page 17
Vibration Sensor/Gateway Sensor Installation Step 9: Confirm the Sensor and Gateway connection The Bluetooth range between the Gateway and Sensors is 65 m (213 ft) line-ofsight. However, this range is affected by metal and concrete around the Sensors and Gateway. Fluke recommends these steps to make - Fluke 3561/3502 FC | Product Manual - Page 18
3561 FC/3502 FC Getting Started Manual Step 10: Mount the Sensors Use the epoxy provided in the package to mount the Sensor on the asset test point. Refer to the Epoxy Application Instructions for mounting the Sensors. Epoxy Mount the Sensor on solid metal of bearing(s) of the machine. Do not mount - Fluke 3561/3502 FC | Product Manual - Page 19
Vibration Sensor/Gateway Specifications Specifications Safety IEC 60950 Sensor Sensitivity Range 32 g Frequency Range ...... 10 Hz to 1000 Hz Sampling Rate 25 600 Hz Temperature Operating 30 °C to +80 °C (-20 °F to +176 °F) Storage 30 °C to +80 °C (-20 °F to +176 °F) Trending Range ......... - Fluke 3561/3502 FC | Product Manual - Page 20
3561 FC/3502 FC Getting Started Manual Gateway Temperature Operating Range 25 °C to +65 °C (-13 °F to +149 °F) Storage 25 °C to +65 °C (-22 °F to +149 °F) Relative Humidity 10 % to 95 % non-condensing Altitude
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
3561 FC/3502 FC
Vibration Sensor/Gateway
Getting Started Manual
PN 5020149
July 2018
©2018 Fluke Corporation. All rights reserved. Specifications are subject to change without
notice. All product names are trademarks of their respective companies.
Shop for Fluke products online at:
1.888.610.7664
www.
MyFlukeStore
.com