Fluke 700P24Ex Fluke 700pex Instruction Sheet

PN 2106534

(English)

May 2004



2004 Fluke Corporation. All rights reserved. Printed in USA

Product Compliance Markings

P

(

II 1 G Eex ia IIC T4

0344

)

I.S. Class I Div. 1 Groups A-D T4

221839

AEx ia IIC T4

Ta = 0

°

C… + 50

°

C

Ex Cerification by Mensor Corporation, San Marcos, TX USA

EMC:

Complies with EN61326, Criteria C.

Limited Warranty

Each Fluke product is warranted to be free from defects in material and

workmanship under normal use and service. The warranty period is one year

and begins on the date of shipment. Parts, product repairs and services are

warranted for 90 days. This warranty extends only to the original buyer or end

user customer of a Fluke authorized reseller, and does not apply to fuses,

disposable batteries or to any product which, in Fluke’s opinion, has been

misused, altered, neglected or damaged by accident or abnormal conditions of

operation or handling. Fluke warrants that software will operate substantially in

accordance with its functional specifications for 90 days and that it has been

properly recorded on nondefective media. Fluke does not warrant that software

will be error free or operate without interruption.

Fluke authorized resellers shall extend this warranty on new and unused

products to enduser customers only but have no authority to extend a greater or

different warranty on behalf of Fluke. Warranty support is available if product is

purchased through a Fluke authorized sales outlet or Buyer has paid the

applicable international price. Fluke reserves the right to invoice Buyer for

importation costs of repair/replacement parts when product purchased in one

country is submitted for repair in another country.

Fluke’s warranty obligation is limited, at Fluke’s option, to refund of the purchase

price, free of charge repair, or replacement of a defective product which is

returned to a Fluke authorized service center within the warranty period.

To obtain warranty service, contact your nearest Fluke authorized service center

or send the product, with a description of the difficulty, postage and insurance

prepaid (FOB Destination), to the nearest Fluke authorized service center. Fluke

assumes no risk for damage in transit. Following warranty repair, the product

will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke

determines that the failure was caused by misuse, alteration, accident or

abnormal condition of operation or handling, Fluke will provide an estimate of

repair costs and obtain authorization before commencing the work.

Following repair, the product will be returned to the Buyer transportation prepaid

and the Buyer will be billed for the repair and return transportation charges (FOB

Shipping Point).

THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS IN

LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE

LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL

DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, WHETHER ARISING

FROM BREACH OF WARRANTY OR BASED ON CONTRACT, TORT,

RELIANCE OR ANY OTHER THEORY.

Since some countries or states do not allow limitation of the term of an implied

warranty, or exclusion or limitation of incidental or consequential damages, the

limitations and exclusions of this warranty may not apply to every buyer. If any

provision of this Warranty is held invalid or unenforceable by a court of

competent jurisdiction, such holding will not affect the validity or enforceability of

any other provision.

®

700PEx Series Pressure Modules

Instruction Sheet

Introduction

The Fluke 700PEx Series Pressure Modules allow you to

measure pressure with Fluke intrinsically safe calibrators

such as the 718Ex. Read this sheet before using the

pressure modules. This instruction sheet contains

specifications and information about how to avoid damaging

the pressure modules and describes how to safely use them

in hazardous locations. Refer to your calibrator’s Users

Manual

for complete operating instructions.

The pressure modules measure pressure using an internal

microprocessor. They receive operating power from and

send digital information to the intrinsically safe calibrators.

•

Gage pressure modules have one pressure fitting and

measure pressure with respect to atmospheric pressure.

•

Differential pressure modules have two pressure fittings

and measure the difference between the applied

pressure on the high fitting versus the low fitting. A

differential pressure module functions like a gage

module when the low fitting is open.

•

Absolute pressure modules measure relative to a

vacuum.

In Case of Difficulty

For service or calibration, call your nearest authorized Fluke

Service Center.

For application or operation assistance or information on

Fluke products, call:

USA:

1-888-99-FLUKE (1-888-993-5853)

Canada:

1-800-36-FLUKE (1-800-363-5853)

Europe:

+31 402-675-200

Japan:

+81-3-3434-0181

Singapore:

+65-738-5655

Anywhere in the world:

+1-425-446-5500

Or, visit Fluke's Web site at

www.fluke.com

.

To register your product, visit

register.fluke.com

Fluke Corporation

Fluke Europe B.V.

P.O. Box 9090

P.O. Box 1186

Everett, WA 98206-9090

5602 B.D. Eindhoven

USA

The Netherlands

Box Contents

Each pressure module comes with an installed strap and

instruction sheet. All pressure modules, with the exception of

the 700P29Ex, come with 1/4 NPT to 1/4 ISO metric

adapters.

Fluke 700P24Ex Fluke 700pex Instruction Sheet

Fluke 700P24Ex Manual

Fluke 700P24Ex manual content summary: