Foscam FI9900P User Manual
Foscam FI9900P Manual
 |
View all Foscam FI9900P manuals
Add to My Manuals
Save this manual to your list of manuals |
Foscam FI9900P manual content summary:
- Foscam FI9900P | User Manual - Page 1
User Manual Outdoor HD IP Camera Model: FI9903P Model: FI9900P / FI9800P Model: FI9900EP / FI9901EP - Foscam FI9900P | User Manual - Page 2
Model: FI9803EP Model: FI9803P Model: FI9804W Model: FI9805W Model: FI9805E V3.7.5 - Foscam FI9900P | User Manual - Page 3
Table of Contents Security Warning...1 1 Overview...1 1.1 Key Features...1 1.2 PoE (Power over Ethernet-FI9805E / FI9803EP / FI9900EP / FI9901EP 2 1.3 Read before Use...2 1.4 Packing Contents...2 1.5 Physical Description...3 1.6 SD Card Management...6 1.7 Wall Installation...7 1.8 The Different - Foscam FI9900P | User Manual - Page 4
6.5 WARRANTY...93 6.6 Statement...95 7 Obtaining Technical Support...96 - Foscam FI9900P | User Manual - Page 5
password of your camera regularly, using a combination of numbers, letters and special characters. 2.We recommend that you regularly update your camera to the latest available software and firmware versions to help ensure the best experience for your camera. 1 Overview FOSCAM Outdoor HD IP Camera - Foscam FI9900P | User Manual - Page 6
Embedded FOSCAM DDNS (dynamic domain name service) Service Supports remote viewing & record from anywhere anytime Multi-level users management with password protection Motion detection alert via email or upload image to FTP Supporting Third Party Domain name Providing Phone apps for - Foscam FI9900P | User Manual - Page 7
, FI9900EP, FI9901EP) DC Power Supply * 1 Mounting Bracket * 1 (except for FI9900P, FI9900EP, FI9800P, FI9901EP) 1.5 Physical Description 1.5.1 Front Panel Front Panel for FI9804W / FI9805W / FI9805E Warranty Card * 1 1 2 3 4 1 WIFI Antenna: Wireless Antenna (FI9804W, FI9805W) 2 Infrared LED - Foscam FI9900P | User Manual - Page 8
IC Front Panel for FI9903P 1 2 3 1 LENS: CMOS sensor with fixed focus lens 2 Infrared Lamp Array 3 Induction IC Front Panel for FI9900P / FI9900EP / FI9800P / FI9901EP 1 2 3 4 1 WIFI Antenna: Wireless Antenna (FI9900P / FI9800P) 2 Infrared LED: 30 IR LEDs 3 LENS: CMOS sensor 4 Induction IC 4 - Foscam FI9900P | User Manual - Page 9
camera can be connected with various network devices, such as hub, router, etc. 3 Reset button Press and hold on the reset button for 5 seconds. Releasing the reset button, the password will back to the factory default administrator password. The default administrator user is admin with no password - Foscam FI9900P | User Manual - Page 10
to two labels located at the bottom of the camera, this is an important feature of original Foscam cameras. If your camera does not have labels, it may be a clone. Cloned Foscam cameras can not use original firmware and are not eligible for warranty or technical services. 1.6 SD Card Management The - Foscam FI9900P | User Manual - Page 11
-install the camera, please ensure the tightness with the camera. 1.7 Wall Installation FI9803EP / FI9803P / FI9903P Step 1: Screw the mount on the wall with the 3 screws provided. Step 2: Install the camera on the mounting bracket with 1 screw to complete installation. FI9800P / FI9900P / FI9900EP - Foscam FI9900P | User Manual - Page 12
ports at the end of the pig tail wiring. These connectors are not weather-resistant. The cable of an outdoor camera should, from the position where the cable is divided into several cables, be fitted dry. Install the cable into a waterproof junction box (1) or bring the cable indoors (2). 8 - Foscam FI9900P | User Manual - Page 13
1.8 The Different Features between the Models Involved Differences Model Wireless FI9804W FI9805W FI9805E FI9803EP FI9803P FI9903P FI9900P FI9900EP FI9800P FI9901EP PoE (Power over Ethernet) Alarm In / Out Audio Input / Output RS485 P2P 9 - Foscam FI9900P | User Manual - Page 14
the Equipment Search Tool from our website for free. 2.2 Access the Camera In LAN 2.2.1 Wired Connection The camera supports HTTP and HTTPS protocols, you can access the camera in two ways. (1) Http:// LAN IP + Http Port No. The default HTTP port NO. is 88. Double click the Search Tool icon to - Foscam FI9900P | User Manual - Page 15
, you can see and change the HTTP and HTTPS port NO. NOTE: When logging in for the first time, you will need to download and install the add-on. 2.2.2 Wireless Connection Only some models support EZLink wireless connection , please refer to the Quick Setup Guide. 11 - Foscam FI9900P | User Manual - Page 16
in WAN 2.3.1 Static IP Addresses Users who have static IP addresses do not need to set DDNS service settings for remote access. When you have finished connecting the camera using the LAN IP address and port forwarding, you can access the camera directly from the Internet using the WAN IP address - Foscam FI9900P | User Manual - Page 17
and DNS Server: Set it to the IP address of your router. 2. Enable UPnP and DDNS in the camera's settings page. We recommend you to use the DDNS by factory default. Select Yes and click Save. Click Enable DDNS and click Save. The content in the Manufacture's DDNS column is the domain - Foscam FI9900P | User Manual - Page 18
router: Choose Forwarding > UPnP, make sure that the Current UPnP Status is Enabled. If there is no UPnP function in your router: You need to manually add port (HTTPS port) forwarding, refer to the following steps. You need go to the Forwarding > Virtual Servers panel for - Foscam FI9900P | User Manual - Page 19
finished the Port Forwarding setup. 5. Now you can access your IP camera by https://domain name: HTTPS port via the Internet. 2.4 Using the VLC Player This camera supports RTSP streaming, here you can view the camera using VLC player. RTSP URL rtsp:// [user name][:password]@IP:port number/videosream - Foscam FI9900P | User Manual - Page 20
Sometimes you may need to enter the user name and password again. Click OK and you can see the real-time 16 - Foscam FI9900P | User Manual - Page 21
mapping. NOTE: If you modify the camera's username or password, you had better reboot the camera, or else the new username and password cannot take effect when you enter the authentication in the VLC. 2.5 IP Camera Connection to the Server Device supports ONVIF 2.2.1 protocol,You can easily access - Foscam FI9900P | User Manual - Page 22
after finish quick installation. 3.1 Login Window Section1 Enter the Username and password The default administrator username is admin with no password, please change the password at first using and prevent unauthorized users login the camera. Section2 Stream The camera supports two stream modes - Foscam FI9900P | User Manual - Page 23
for the first time, you will go to Setup Wizard automatically. Here you can set the basic parameters of camera, such as camera name, camera time, wireless settings, IP configuration. Country: Select the country. Device Name: You could give name for your camera. System Time: Select the time zone you - Foscam FI9900P | User Manual - Page 24
Wireless networks: Click Scan, find the SSID of your wireless router, select and enter the password. IP: Set IP address of the camera. You could choose to obtain an IP automatically or set the IP address according to your needs. 20 - Foscam FI9900P | User Manual - Page 25
NOTE: It needs about 1 minute to connect the camera to your router. 3.2 Surveillance Window 1 2 8 3 4 5 6 7 Differences Model FI9804W FI9805W FI9805E FI9803EP FI9803P FI9903P Playback WDR 9 Pan / Tilt Control Zoom out / Zoom in Cruise 21 - Foscam FI9900P | User Manual - Page 26
in multi-camera panel. Section3 Mode / Stream / WDR / NAA / Mirror / Flip buttons Mode 1) 50Hz ---------Indoor surveillance (Region: Europe, China) 2) 60Hz ---------Indoor surveillance (Region: USA, Canada) 3) Outdoor Mode------Outdoor surveillance Stream The default stream supports multiple modes - Foscam FI9900P | User Manual - Page 27
OFF as default. "Zoom in" or "Zoom out" (FI9900P, FI9900EP, FI9901EP) Device Support 8x zoom feature, click or ,The focal length of the camera lens will be use this feature. 1 3 4 2 1------Up control button, 3------Left control button, Click this button and go to center 2------Down control - Foscam FI9900P | User Manual - Page 28
will cruise following the predefined path. Thirdly: Click stop button and finish cruising. Section6 IR LED Lights Click Infra led and there are three modes to adjust the infrared led: Auto, Manual and Schedule. Auto: Select it and the camera will adjust the infra led (on or off) automatically - Foscam FI9900P | User Manual - Page 29
and the icon will become to , then talk to the microphone that connected with PC, people around the camera can hear your voice if the camera has connected with audio output device. Click the icon again and stop talking. 4------ Audio Click the button and the icon will become to , you can hear - Foscam FI9900P | User Manual - Page 30
. Onscreen Mouse Control Right click the mouse and you can adjust the screen ration, full screen and Zoom up. Keep Ration: Select it and the camera will adjust the size of live window based on the computer monitor automatically. Sometimes there is a black border around the video, please select Keep - Foscam FI9900P | User Manual - Page 31
: Click it and the live view will be digital zoomed up, then click Zoom Down and the live view back to original size. NOTES: 1. This camera don't support Pan / Tilt function, so here can not allow to use Screen PTZ. 2. For Mac OS, the plugin cannot - Foscam FI9900P | User Manual - Page 32
Settings Click the button Settings, goes to Administrator Control Panel to make advanced camera settings. 4.1 Setup Wizard The way panel where you can change your camera name. The default device name is anonymous. Camera ID: Display the MAC address of your camera. For example Device ID is - Foscam FI9900P | User Manual - Page 33
the time. System Firmware Version: Display the System Firmware version of your camera. Application Firmware Version: Display the application firmware version of your camera. Plug-In Version: Display the plug-in version of your camera 4.2.2 Device Status On this page you can see device status such as - Foscam FI9900P | User Manual - Page 34
one page number, click Go button and go to the corresponding page . Reboot the camera and clear the log records. 4.3 Basic Settings This section allows you to configure your Camera Name, Camera Time, Mail, User Accounts and Multi-Device. 4.3.1 Camera Name Default alias is anonymous. You can define - Foscam FI9900P | User Manual - Page 35
Save button to submit your settings. NOTE: If the power supply of camera is disconnect, you need set the camera's time again. 4.3.3 User Accounts Here you can create users and set privilege, visitor, operator or administrator. The default administrator user accounts are admin with a blank password - Foscam FI9900P | User Manual - Page 36
, select the account which you want to change the password, then select Change Password, enter the old password and the new password, lastly click modify to take effect. How to add account ? Select one blank column, then enter the new user name, password and privilege, last click Add to take effect - Foscam FI9900P | User Manual - Page 37
83, 84, 85, 86, 87, 88 to the cameras if there is 8 cams installed. The firmware within the camera can support a maximum of 9 devices monitoring all at the same time. This page you can both add FOSCAM MJPEG and H.264 series cameras to the first camera and view multi-surveillance screen on one window - Foscam FI9900P | User Manual - Page 38
following boxes automatically . 3 Click Add to take effect . 2 Enter the User name and password of the 2nd camera . Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show you which series the camera belongs to. Back to Surveillance Windows, and click Four Windows - Foscam FI9900P | User Manual - Page 39
via the internet (remote computer), you will need to add them using DDNS domain name. Firstly, make sure all of the cameras you added can be accessed through the internet. (Read How to configure DDNS settings in chapter 4.4.4 DDNS) Login to the first camera using a DDNS domain name and port. 35 - Foscam FI9900P | User Manual - Page 40
Settings. Choose The 2nd Device. Fill in the 2nd camera's name, DDNS domain name, port number. Enter user name and password and then choose Add. 1 2 3 4 5 1----- The camera model: MJ or H.264. 2----- The 2nd camera's name 3----- Fill in the 2nd camera's DDNS host not LAN IP 4 ---- Enter the 2nd - Foscam FI9900P | User Manual - Page 41
enable or select "No" to disable. If select "Yes", you can hear the voice prompt after connect the audio output device. 4.4 Network This section will allow you to configure your camera's IP, PPOE, DDNS, Wireless Settings, UPnP, Port, Mail Settings and FTP Settings. 4.4.1 IP Configuration If you want - Foscam FI9900P | User Manual - Page 42
the subnet mask, gateway and DNS server, you can check your computer's local area connection as follows: Control Panel > Network Connections > Local Area Connections > Choose Support > Details. 38 - Foscam FI9900P | User Manual - Page 43
the Default Gateway. 4.4.2 Wireless Settings (FI9803P / FI9804W / FI9805W / FI9900P / FI9800P) Step 1: Choose Settings on the top of the camera interface, and go to the "Network" panel on the left side of the screen, then click Wireless Settings. Click the Scan button and the camera will detect all - Foscam FI9900P | User Manual - Page 44
connection of the camera successfully. NOTE: If you fail to make a wireless connection, please refer to your seller or contact us directly for assistance. 4.4.3 PPPoE Only some models support PPPoE. If you are using a PPPoE connection, enable it and enter the User Name and Password for your PPPoE - Foscam FI9900P | User Manual - Page 45
4.4.4 DDNS If you need Foscam DDNS, you can apply it on DDNS page. First Enable DDNS, then select "myfoscam.org" from DDNS Server list, click "Get My DDNS Now". Then login your Foscam Cloud account for myfoscam.org, and click "Get DDNS". 41 - Foscam FI9900P | User Manual - Page 46
If you don't have a Foscam Cloud account, click "Tap HERE" to register one, then click "Get DDNS". 42 - Foscam FI9900P | User Manual - Page 47
After get DDNS, click "Finish" to go back to DDNS settings. If the network error, you fail to get the DDNS, please try again. 43 - Foscam FI9900P | User Manual - Page 48
Once you success get Foscam DDNS, you can follow below step to use. Here take test09.myfoscam.org for domain name. Now you can use http:// Domain name + HTTP Port to access the camera via internet. Take hostname cp4911.myfoscam.org and HTTP Port no. 8000 for example, the accessing link of the - Foscam FI9900P | User Manual - Page 49
, here click this button and start Manufacturer's DDNS Service. Third Party Domain Name Settings User can also use third to register Please register an account step by step according to instructions on www.no-ip.com After registration, please login your email password to create your domain name. 45 - Foscam FI9900P | User Manual - Page 50
step by step according to instructions on www.no-ip.com Step 2 DO DDNS Service Settings within the Camera Please set DDNS Settings within the camera by hostname, a user name and password you've got from www.no-ip.com Take hostname ycxgwp.no-ip.info, user name foscam, password foscam2012 for example - Foscam FI9900P | User Manual - Page 51
Thirdly, fill foscam as DDNS user, fill password foscam2012 as DDNS password, fill ycxgwp.no-ip.info as DDNS domain and server URL, Then click save to make effect. The camera will restart and to take the DDNS settings effective. Fourthly, after the restart, login the camera, and go to option of - Foscam FI9900P | User Manual - Page 52
be issues with your routers security settings, and sometimes may error. We recommend you configure port forwarding manually on your router . 4.4.6 Port This camera supports HTTP Port / HTTPS Port / ONVIF Port. HTTP Port is used to access the camera remotely. HTTP port: By default, the HTTP is set to - Foscam FI9900P | User Manual - Page 53
password, click OK. Step 2: Enter the username and password of the Administrator (default username is admin with a blank password), and click OK to apply changes. Step 3: Wait around 10 seconds, you'll see that the camera problems later with remote access and seeing the camera remotely if the camera - Foscam FI9900P | User Manual - Page 54
ports. RTSP Port: The default port is 554,only some IP Cameras have RTSP port. 4.4.7 Mail Settings If you want the camera to send emails when motion has been detected, here Mail will need to be configured. 5 1 2 6 3 4 1----- SMTP Server / Port / Transport Layer Security Enter SMTP server for sender - Foscam FI9900P | User Manual - Page 55
Test . 1) Cannot connect to the server. 2) Network Error. Please try later. 3) Server Error. 4) Incorrect user or password. 5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try again. 6) The receiver is denied by the server. Maybe because of - Foscam FI9900P | User Manual - Page 56
the internet, you can set as below. Port: Default is port 21. If changed, external FTP client program must change the server connection port accordingly. FTP Mode: Here supports two modes: PORT and PASV. Username / password: The FTP account and password. Click Save to take effect. Click Test to see - Foscam FI9900P | User Manual - Page 57
smart phone (Android or iOS operating system),please refer to the Quick Setup Guide. First of all, you need to open the P2P function of the camera at Settings > Network > P2P. 4.5 Video This section allows you to configure Video stream settings, On screen display and Snapshot settings. 4.5.1 Video - Foscam FI9900P | User Manual - Page 58
larger too, and it will take up more bandwidth. (Different models support different specific types. ) Bit Rate: Generally speaking, the larger the bit rate Bit Rate (except for FI9900P, FI9900EP): Select the Bit rate type to constant or variable. If select Yes, the camera will change the video bit - Foscam FI9900P | User Manual - Page 59
not support this Function. This page is used to add privacy zone on the video. Allow On Screen Display Mask There are two options: Yes or NO. Select yes and draw a mask area on the video, the mask area will be black on the video. The privacy zone Click OK button and - Foscam FI9900P | User Manual - Page 60
, when alarming, the camera will snap pictures to the FTP or SD card automatically. If you select the FTP, you can set the file name which the picture save to. For example: file name is "NAME", the snapshot picture is "NAME_20150605-180000.jpg". Only FI9803EP, FI9900P, FI9900EP support SD card. 56 - Foscam FI9900P | User Manual - Page 61
black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the camera will capture turned off. 4.6 Detector 4.6.1 Motion Detection IP Camera supports Motion Detection Alarm, when the motion has been detected, it will send emails or upload images - Foscam FI9900P | User Manual - Page 62
The interval time between two motion detections. Here supports 5s / 6s / 7s / 8s / 9s / 10s / 11s / 12s / 13s / 14s / 15s. Select one interval time. 4 There are some alarm indicators: A Camera Sound and PC Sound If the camera has connected with a speaker or other audio output device, if you select - Foscam FI9900P | User Manual - Page 63
area and it pop up a window, then you can draw the detection area. Click Back button after settings. When something moving in the detection area, the camera will alarm. 6 Alarm Schedule A Alarm anytime when motion is detected Click the black button up the MON, you will see all time range turn red - Foscam FI9900P | User Manual - Page 64
you can select the serial area, 7 Click Save button to take effect. When the motion is detected during the detection time in the detection area, the camera will alarm and adopt the corresponding alarm indicators. NOTE: You must set the detection area and detection schedule, or else there is no alarm - Foscam FI9900P | User Manual - Page 65
55db. If the Sensitivity is set to Medium, the camera will detect the sound whose more than 65db. If the Sensitivity is set to Low, the camera will detect the sound whose more than 75db. If the Sensitivity is set to Lower, the camera will detect the sound whose more than 85db. If the Sensitivity is - Foscam FI9900P | User Manual - Page 66
There is an IO alarm input / output lines in the FOSCAM camera tails. Enable IO alarm need this cable to connect to the alarm device (door sensor, infrared sensor, smoke detector, etc.). I/O Alarm has four ports: Port 1 - Foscam FI9900P | User Manual - Page 67
restart. NOTE: Motion detection alarm can also be triggered IO alarm output. 4.7 Record 4.7.1 Storage Location Recording Location: SD card, FTP. SD card (Only FI9803EP / FI9900P / FI9900EP / FI9901EP): The video will be saved in SD card. Make sure the camera has been inserted the SD card. On this - Foscam FI9900P | User Manual - Page 68
4.7.2 Alarm Record 4.7.3 Local Alarm Location On this page you can enable local alarm record, and select the local alarm record time. 4.7.4 Schedule Recording When the video is selected as FTP, the device supports scheduled recording. 64 - Foscam FI9900P | User Manual - Page 69
When the video is selected as SD card, the device supports pumping frame recording (FI9803EP, FI9900P, FI9900EP support SD card). 65 - Foscam FI9900P | User Manual - Page 70
end. 4.7.5 SD Card Management (FI9803EP / FI9900P / FI9900EP / FI9901EP) The SD card Slot inside the camera, if you want to install or remove the SD card, you need to open the camera. When you plug in the SD card during the camera work process, please reboot the camera again, or else the SD Card may - Foscam FI9900P | User Manual - Page 71
: very fast, fast, normal, slow and very slowly. Select the desired pan / tilt speed type and click save button . 4.8.2 RS485 Configuration This camera supports the standard 485 cradle head protocol (PELCO-D and PELCO-P). Please configure the RS485 protocol corresponding information first, or else - Foscam FI9900P | User Manual - Page 72
Save to take effect. 4.10 System In this panel, you can back up / restore your camera settings, upgrade the firmware to the latest version, restore the camera to default settings and reboot the device. 4.10.1 Back-up & Restore Click Backup to save all the parameters you have set. These parameters - Foscam FI9900P | User Manual - Page 73
, you can see the upgrade result. Upgrade Firmware by Equipment Search Tool Double click the Equipment Search Tool shot icon , select the Camera IP that you want to upgrade the firmware. Then select Upgrade Firmware and enter the username and password, choose the firmware file, and upgrade. 69 - Foscam FI9900P | User Manual - Page 74
the Device Firmware. 5) Never shut down the power of the camera during upgrade until the IP camera restart and get connected. 6) After upgrade successfully, please clear the cache of browser, uninstall the old plugin and re-install it, then reset the camera to the default factory settings before - Foscam FI9900P | User Manual - Page 75
. After installing is complete, you will receive a system prompt. 4.10.4 Factory Reset Click Factory Reset button and all parameters will return to factory settings if selected. The default administrator username is admin with a blank password. 4.10.5 Reboot Click Reboot to reboot the camera. This - Foscam FI9900P | User Manual - Page 76
/ FI9900P / FI9900EP) On this page you can view the record files stored in the SD card. Section 1 Define the Record files time and Type : The storage path of record files : Here supports three types: current day, current month and All records. Another way, select the time on the time&date manually - Foscam FI9900P | User Manual - Page 77
the conditions you set. Section 3 Play / Stop / Audio / Full screen Buttons Please select one record file before use these buttons. Click this button to play the record files Click this button to stop the record files Open or stop audio Click this button to make full screen, and double click left - Foscam FI9900P | User Manual - Page 78
6 Appendix 6.1 Frequently Asked Questions 6.1.1 Install the ActiveX of Firefox Browser, Google Chrome and IE Chrome. 74 - Foscam FI9900P | User Manual - Page 79
75 - Foscam FI9900P | User Manual - Page 80
76 - Foscam FI9900P | User Manual - Page 81
6.1.2 Uninstall the ActiveX of Firefox Browser, Google Chrome and IE Chrome. 77 - Foscam FI9900P | User Manual - Page 82
that, press and hold down the RESET BUTTON about 5 seconds. Releasing the reset button, the password will turn to the factory default. Default administrator username / password: admin with blank password 6.1.4 Subnet doesn't Match Check whether your ip camera in the same subnet of your computer - Foscam FI9900P | User Manual - Page 83
6.1.7 Can't Access IP Camera in Internet There are some reasons: 1 ActiveX controller is not installed correctly 2 The port which camera used is blocked by with router's security settings. So we recommend you do port forwarding manually. You can view your camera in internet successfully after 79 - Foscam FI9900P | User Manual - Page 84
camera. 6.2 Default Parameters Default network parameters IP address: obtain dynamically Subnet mask: obtain dynamically Gateway: obtain dynamically DDNS: Embedded FOSCAM DDNS Service Username and password Default admin username: admin with a blank password 6.3 Specification or manual With - Foscam FI9900P | User Manual - Page 85
Security Remote Access Network Protocol Operating System Browser Motion Detection User Accounts Firewall Reset via E-mail, upload alarm snapshot to FTP Three levels user role Supports IP Filtering Reset button is available DC 12V / 1.0A 4.2 Watts ( manual Infrared lamp array, IR LEDs for IR range up to 20m - Foscam FI9900P | User Manual - Page 86
System Browser Motion Detection Privacy Block User Accounts Firewall Storage Reset Power Supply PoE Power via E-mail, upload alarm snapshot to FTP Set privacy area manually Three levels user role Supports IP Filtering SD card and local storage Reset button is available DC 12V / 1.0A IEEE. 802.3af - Foscam FI9900P | User Manual - Page 87
Browser Motion Detection Privacy Block User Accounts Firewall Reset Power Supply Power Consumption Dimension (L * W * H) Net Weight Power Consumption Operating Temperature Operating Humidity Storage Temperature Storage Humidity CE, FCC, IP66, RoHS adjustable flip and mirror Automatic or manual With - Foscam FI9900P | User Manual - Page 88
Flip image Infrared mode IR range Input / Output Audio Compression Ethernet Wireless Standard Data Rate Wireless Security Network Protocol Operating System Browser Motion Detection Privacy Block User Accounts Firewall Reset Power Supply Power Consumption Dimension (L * W * H) Net Weight Operating - Foscam FI9900P | User Manual - Page 89
, sharpness are adjustable Infrared mode Automatic or manual IR range Ethernet Supported Protocol Wireless Standard Support IP address Alarm detection Alarm inform POWER Interface Audio Input / Output Interface Reset Buttons Operate Temper Operate Humidity Storage Temper Storage Humidity - Foscam FI9900P | User Manual - Page 90
, dynamic IP address The motion detecting, I/O alarm Support Email, FTP, I/O output alarm etc alarm inform way DC 12V / 2.0A (EU,US,AU adapter or other types option), Power Consumption < 8 Watts One audio input jack, One audio output jack. Reset Buttons One Reset I/O alarm interface Control - Foscam FI9900P | User Manual - Page 91
Audio Compression Ethernet Wireless Standard Network Data Rate Wireless Security Remote Access Network Protocol System Requirements Operating System FI9900P mirror Automatic or manual With 30pcs IR-LED, IR LEDs for IR range up to 20m / 66ft External RCA interface for two-way audio PCM / G.726 - Foscam FI9900P | User Manual - Page 92
Physical Environment Certification Motion Detection Privacy Block User Accounts Firewall Reset Power Supply Power Alarm via E-mail, upload alarm snapshot to FTP Set privacy area manually Three levels user role Supports IP Filtering Reset button is available DC 12V / 1.0A 5 Watts (Max.) 97mm * - Foscam FI9900P | User Manual - Page 93
Input / Output Audio Compression Ethernet Remote Access Network Protocol System Requirement s Operating System Browser Other Features Power Physical Environment Certification Motion Detection Privacy Block User Accounts Firewall Reset Power Supply POE Standard Power Consumption Dimension - Foscam FI9900P | User Manual - Page 94
/ Output Audio Compression Ethernet Wireless Standard Data Rate Wireless Security Remote Access Motion Detection Alarm via E-mail, upload alarm snapshot to FTP Privacy Block Set privacy area manually User Accounts Three levels user role Firewall Supports IP Filtering Reset Reset button - Foscam FI9900P | User Manual - Page 95
Audio Compression Ethernet Remote Access Network Protocol System Requirement s Operating System Browser Other Features Power Physical Environment Motion Detection Privacy Block User Accounts Firewall Reset Power Supply POE area manually Three levels user role Supports IP Filtering Reset button is - Foscam FI9900P | User Manual - Page 96
and used in accordance with the installation manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is like to cause harmful interference, in which case the user will be required to correct the interference at his own expense. FCC Caution - Foscam FI9900P | User Manual - Page 97
who then sell products to end users. No warranty service is provided unless the product is returned to an authorized return center in the region where the product was first shipped by FOSCAM or to the point-of-purchase, which may have regional specific warranty implications. If you purchase your - Foscam FI9900P | User Manual - Page 98
Abuse firmware upgrade without sold by FOSCAM. Damage caused by improper installation of third- FOSCAM. Different region may have different service fee, please contact the point-of-purchase to confirm that before you ask for this service. Our technicians will quote the total price after detect - Foscam FI9900P | User Manual - Page 99
upgrade equipment firmware to strengthen security consciousness. Our company makes no warranty, implied or otherwise, that this product is suitable for any particular purpose or use. You need to abide by the relevant laws and regulations of the use restrictions when using Foscam cameras. Our company - Foscam FI9900P | User Manual - Page 100
some issues or have questions that this User's Guide has not answered. If you have problem with FOSCAM IP camera, please first contact FOSCAM reseller for solving the problems. If our reseller cannot provide service, please contact our service department: [email protected] . CE Certicate Website: http
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
 |
 |
User
User
Manual
Manual
Outdoor HD IP Camera
Model: FI9903P
Model: FI9900P / FI9800P
Model: FI9900EP / FI9901EP