Foscam FN3104H User Manual

Foscam FN3104H Manual

Get Foscam FN3104H PDF manuals and user guides View all Foscam FN3104H manuals
Add to My Manuals
Save this manual to your list of manuals

Foscam FN3104H manual content summary:

  • Foscam FN3104H | User Manual - Page 1
    Network Video Recorder User Manual Model: FN3004H Color: Black Model: FN3004H Color: White Version:V1.2 Model: FN3104H
  • Foscam FN3104H | User Manual - Page 2
    NVR User Manual Table of Contents Table of Contents...1 Preface...3 Important safety instructions...4 1 Overview...5 1.1 Product Introduction...5 1.2 Key Features...5 1.3 Relevant Version...8 1.4 Icons Description...8 1.5 Common Operations...9 2 Device...11 2.1 FN3104H 3.2 Setup Wizard...
  • Foscam FN3104H | User Manual - Page 3
    NVR User Manual 3.4.2 Playback...36 3.4.3 Backup...38 3.4.4 About...39 3.4.5 Settings...43 3.4.6 System...62 4 Web...67 4.1 Instructions before Login...67 4.2 Login...67 4.3 Live Video...70 4.4 Parameter Configuration...74 4.4.1 Local Settings...74 4.4.2 Device Management...83 4.4.3 Service
  • Foscam FN3104H | User Manual - Page 4
    NVR User Manual Preface Welcome to use our product, Network Video Recorder. This document mainly focuses on the installation and configuration of NVR LAN application system. With high performance video, user-friendly GUI, and practical industrial designs. This series NVR is suitable for civil
  • Foscam FN3104H | User Manual - Page 5
    NVR User Manual Important safety instructions This chapter describes how to use the product properly so as to prevent danger and property loss. Be sure to follow the security instructions operations such as recording and playback.  Please press power button to shut down the NVR instead cutting off
  • Foscam FN3104H | User Manual - Page 6
    NVR User Manual 1 Overview 1.1 Product Introduction The series of product series is a 4 channel embedded NVR. This advanced product series receives a high quality video stream that is transmitted digitally by the IP Camera (IPC). The product can perform live video preview, recording, playback,
  • Foscam FN3104H | User Manual - Page 7
    are different, the NVR recording will based on the NVR system time. Playback You can play back video files stored in the HDD. Recording includes schedule recording, manual recording, and alarm recording. Single-screen playback and four-screen synchronous playback are supported. When display mode
  • Foscam FN3104H | User Manual - Page 8
    NVR User Manual  I/O Alarm (FN3004H does not supports NVR system can also enable I/O alarm recording, send pictures to your mailbox and the buzzer of the NVR select the cycle cover the earliest recording or stop recording. Backup You can query video files stored by the NVR in the HDD and can back
  • Foscam FN3104H | User Manual - Page 9
    NVR User Manual  Support the logging function.  Support local GUI output and perform shortcut operations through the mouse.  The NVR may also be controlled with the included IR remote control.(FN3004H does not supports this function)  Three roles can access the NVR, which are respectively
  • Foscam FN3104H | User Manual - Page 10
    NVR User Manual : IO Alarm is triggered but linkage recording does not start. : Motion detection alarm is triggered but linkage recording does not start. : The HDD is full, and the recording has been stopped. You can select the cycle cover the earliest recording on the General page to make the icon
  • Foscam FN3104H | User Manual - Page 11
    NVR User Manual - After login, right-click the mouse, you can click Shutdown in the shortcut menu. turning off the power switch on the rear panel (especially during recording). Reset You can reset the NVR device to restore the factory settings. You can choose any one of the following methods operate
  • Foscam FN3104H | User Manual - Page 12
    NVR User Manual 2 Device 2.1 FN3104H 2.1.1 Package Contents When you receive the NVR, please open the box and check whether there is any visible damage to the NVR appearance. Then, please verify that all contents received are complete according to the package contents listed below. At last,
  • Foscam FN3104H | User Manual - Page 13
    NVR User Manual 2.1.2 Installing the HDD For the first use,please install the HDD. WARNING  Before installing a hard disk drive (HDD), please make sure the power is disconnected from the NVR.  Recommend that you use HDD of 7200 high-speed or above.  Find the ESD gloves from the package of the NVR
  • Foscam FN3104H | User Manual - Page 14
    NVR User Manual 4. Re-install the cover of the NVR and fasten screws. 2.1.3 Device Structure Front Panel Icon Name PWR POWER Status Indicators Description The Power LED on the front panel will light in green after complete the wiring. www.foscam.com 13
  • Foscam FN3104H | User Manual - Page 15
    NVR User Manual HDD HDD Status Indicators The red LED is on: The HDD is not installed or cannot be detected. Blinks green: The HDD is writing, the NVR is recording. The green LED is on: The HDD is in the normal status and the NVR does not record. Rear Panel www.foscam.com 14
  • Foscam FN3104H | User Manual - Page 16
    NVR User Manual Icon Name Power Switch Power Supply Description Switch for turning on/off the device. 12VDC power supply. HDMI VGA LAN Interface HDMI video output connector. VGA video output connector. Display local video with the NVR. Ground terminal Control Description The NVR may also be
  • Foscam FN3104H | User Manual - Page 17
    NVR User Manual to aim the remote control at the IR receiver in the middle position of the front panel. No. 1 12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Name Power Recording Playback NO. (0-9) Switch MENU SEQ Manageme nt PTZ ESC Direction OK Previous Slow progress key Rewind key Next key Fast
  • Foscam FN3104H | User Manual - Page 18
    NVR User Manual 2.1.5 Device Connection Connect to the Power Supply You should first make sure that the AC voltage connected with the NVR power adapter matches with the requirements. And then connect the power adapter to power input interface of NVR, the power indicator on the front panel will
  • Foscam FN3104H | User Manual - Page 19
    NVR User Manual fluency and clarity of the images transmitted over the network. Connect to the Alarm Input and Output Devices The alarm input/output device should be connect the Alarm IN /Alarm OUT interface of NVR. Connect to the Video Output Device Connect the VGA Monitor to VGA interface of NVR,
  • Foscam FN3104H | User Manual - Page 20
    NVR User Manual ● Warranty Card×1 The package contents list does not contain a mobile FOSCAM IPC, or the third-party IPC which supports ONVIF protocol. 2.2.2 Device Structure Side Panel Icon Name HDMI Description HDMI video output connector. VGA VGA video output connector. Display local video
  • Foscam FN3104H | User Manual - Page 21
    NVR User Manual Rear Panel Icon Name LAN Interface Description Connector for LAN. USB Interfaces POWER Status Indicators Power Supply Universal Device Connection Connect to the Power Supply You should first make sure that the AC voltage connected with the NVR power adapter www.foscam.com 20
  • Foscam FN3104H | User Manual - Page 22
    NVR User Manual matches with the requirements. And then connect the power adapter to power input interface of NVR, the power status indicators on the rear panel will light in green,which means that the power supply is properly connected. Note Please use the NVR power adapter provided in the package
  • Foscam FN3104H | User Manual - Page 23
    NVR User Manual Click and Drag Right-Click Single-Click Time or Area box: Select the time or zone range. Time bar: Drag time bar. Live view: Show menu. Menu: Exit current menu to upper level menu. Note The Single-Click mentioned in this article is refer to the left mouse click. www.foscam.com
  • Foscam FN3104H | User Manual - Page 24
    NVR User Manual 3 GUI You can visit the local NVR device via the display or monitor, and view or manage NVR system. NVR device is connected to the network,mouse,and mobile storage devices have been successfully installed. Make sure the video output device is connected successfully. 3.1 Login Step1
  • Foscam FN3104H | User Manual - Page 25
    NVR User Manual Step5 Click OK button when pop-up message box . Then enter the new username, new password and confirm the password. Click OK button. -------End 3.2 Setup Wizard By default, the Setup Wizard starts once the NVR has loaded, as shown in Figure below. The Setup Wizard can walk you
  • Foscam FN3104H | User Manual - Page 26
    NVR User Manual Note You can also close the setup wizard by setting the Setup Wizard on "Menu > Settings > General". Step2 Click next button, enter the date and time settings Automatically synchronize with and Internet time server, you need configure the NTP Server information。 www.foscam.com 25
  • Foscam FN3104H | User Manual - Page 27
    NVR User Manual - If you don't select the Automatically synchronize with and Internet time Select the HDD and initialize the HDD, click the Format Local Disk button to format the disk for recording. Click the Format USB Disk button to format the disk for backup. Initialization removes all the data
  • Foscam FN3104H | User Manual - Page 28
    NVR User Manual 1. You can find and select the IPC to be added. 2.Click Add 1.Select the IPC Note If you don't find out your IP camera, you the input keyboard. 3. Click OK button to exit the IP Camera Setting window. 4. You can find the IP Camera in the IP Camera List. www.foscam.com 27
  • Foscam FN3104H | User Manual - Page 29
    NVR User Manual 5. Click Finish button to complete the startup Setup Wizard. Live view interface shows you the video image getting from each IP camera in real time. ------End 3.3 Shortcut Menu Live view shows you the video image getting from each IP camera in real time. The NVR automatically
  • Foscam FN3104H | User Manual - Page 30
    NVR User Manual After login, right-click the mouse, you will enter the shortcut menu. 1-Channel/4-Channel Switch between different channels video. Menu Click Menu to enter the . Playback You can display the video of every a channel for playback. For details, see "0 3.4.2 www.foscam.com 29
  • Foscam FN3104H | User Manual - Page 31
    NVR User Manual Playback". Manual Record Click Manual Record to set manual record for single channel or all channels. 【Enable Manual Record】 Check the Channel checkbox, Click OK button to take effect. Right- In PTZ control settings, select the channel from the drop-down list. www.foscam.com 30
  • Foscam FN3104H | User Manual - Page 32
    NVR User Manual 【Optical Zoom】 Configure the zoom of the IP Camera by clicking IPC devices with zoom function.) 【Preset points】 or .(This feature only supports IP Sequential Select Sequential. You can see the monitoring video of each channel on the preview page cyclically. The foscam.com 31
  • Foscam FN3104H | User Manual - Page 33
    NVR User Manual NVR system. 3.4 Menu Right-click in live view mode and select Menu from the Shortcut Menu, the Menu interface is displayed. 3.4.1 IPC Manager basic information of the camera lists in the IP Camera List, and you can configure the basic setting of the IP cameras. www.foscam.com 32
  • Foscam FN3104H | User Manual - Page 34
    NVR User Manual Note Before applying Add function, please make sure that IP camera is compatible with NVR, and the username, password and port number of the IP camera are known. Searching IP Cameras NVR will automatically Camera 1．Select the IP Camera in the IPC Manager list. www.foscam.com 33
  • Foscam FN3104H | User Manual - Page 35
    NVR User Manual 2.Click Add button 1.Select the IPC 2．Click Add button and the following interface will be shown: 1.Select Channel 2.Input the Username and adding. And the camera and its information will be added in the IP Camera list. 4．Click Save button to take effect. www.foscam.com 34
  • Foscam FN3104H | User Manual - Page 36
    NVR User Manual Green indicates that the connection is successful. 5．Right-Click to return the previous interface. Manually Adding IP Cameras Click Manually Add button in the IPC Management interface. You can select the in the list of cameras. Click OK button to take effect. www.foscam.com 35
  • Foscam FN3104H | User Manual - Page 37
    NVR User Manual 3.4.2 Playback Right-click in live view mode and select Playback from the Shortcut Menu, or choose "Menu > Playback" in the Menu interface. The Playback interface is displayed. It supports single-screen or four screens. 1: Select a date with recording in calendar. 2: Select the
  • Foscam FN3104H | User Manual - Page 38
    NVR User Manual After searching file, click the button to play. Pause Stop Fast forward. The the normal speed. Frame forward. View the image of each frame. 5:Playback time and maximized video playback Button Description Zoom-in time axis. Left moving time axis. Right moving time axis. Zoom-out
  • Foscam FN3104H | User Manual - Page 39
    NVR User Manual 3.4.3 Backup Choose "Menu > Backup" in the Menu interface. The Backup interface is displayed. You can search the record information, and export the record information to a mobile storage device for backup. The record type contains Schedule Record, Manual Record and Alarm Record. 【
  • Foscam FN3104H | User Manual - Page 40
    NVR User Manual 1.Double-click NO by the left mouse,the status will change from No to Yes. 2.Select the object address 3.Click Backup 5. Check backup result. The system saves the recording to the mobile storage device in the format of MP4. For example, indicates that the video file is created
  • Foscam FN3104H | User Manual - Page 41
    NVR User Manual Firmware Version Choose "Menu > About > Firmware Version" in the Menu interface. The Firmware Version interface is displayed. You can view the Device Type, Device Name and Firmware Version. HDD Info Choose "Menu > About > HDD Info" in the Menu interface. The HDD Info interface is
  • Foscam FN3104H | User Manual - Page 42
    NVR User Manual the record disk, then click Format Local Disk to format the record disk if the format is incorrect. System Log Choose "Menu > About > System Log" in the Menu interface. The System Log interface is displayed. The operation, alarm, exception and information of the NVR
  • Foscam FN3104H | User Manual - Page 43
    NVR User Manual 【Searching Log】 1．Select the log type, channel and time. 2．Click the Search button to list all matched logs. 【Backup Log】 The log information :40:22. When searching for the log information, you can also select "backup page" or "backup all"to achieve bulk backup. www.foscam.com 42
  • Foscam FN3104H | User Manual - Page 44
    NVR User Manual 3.4.5 Settings Choose "Menu > Settings" in the Menu interface. The Settings interface is displayed. You can configure the general, video, schedule, network, display, Alarm Settings and OSD. General Choose "Menu > Settings > General" in the Menu interface. The General interface is
  • Foscam FN3104H | User Manual - Page 45
    NVR User Manual NOTE Please do not modify the NVR system time when recording. Parameter Device Name Description You can modify your device name to help you identify it. Time Zone Please select the time zone according to the
  • Foscam FN3104H | User Manual - Page 46
    NVR User Manual Parameter Channel Resolution Bit Rate Frame Rate Key Frame Interval Description You can select the channel for the IP Cameras. The resolution of the IP Camera. The higher the resolution is,the sharper the video quality is, but also with the increasing stream, which will take up the
  • Foscam FN3104H | User Manual - Page 47
    NVR User Manual Schedule Choose "Menu > Settings > Schedule" in the Menu interface. The Schedule interface is displayed. You can enable or disable schedule record for the every channel. 【Enable Schedule Recording】 1．Select channel from drop-down box list. 2．Check the Enable checkbox to enable
  • Foscam FN3104H | User Manual - Page 48
    NVR User Manual 2．Uncheck the Enable checkbox to disable Schedule Recording function. 3．Click Save button to take effect for one certain channel. Network Choose "Menu > Settings > Network" in the Menu interface. The Network interface is displayed.You can configure the information of Network, DDNS,
  • Foscam FN3104H | User Manual - Page 49
    NVR User Manual Parameter Description You can select the network type from the drop-down list box. Type If select the DHCP, NVR system will automatically obtain an IP address and other network settings from that server. If select the Static IP, you can configure an IP address and other network
  • Foscam FN3104H | User Manual - Page 50
    NVR User Manual The FOSCAM NVR has embedded a unique DDNS domain name when producing, and you can 【 EMail 】 Check the EMail checkbox, you can configure the E-mail information of the NVR. The system can be configured to send an email to the designated users if an alarm or www.foscam.com 49
  • Foscam FN3104H | User Manual - Page 51
    NVR User Manual motion event is detected etc.. Before configuring the Email settings, the NVR must be connected to a local area network (LAN) that maintains an SMTP mail server. Parameter Enable E-Mail Authentication SMTP Server SMTP Port Enable SSH SMTP Username SMTP Password Sender Receiver www.
  • Foscam FN3104H | User Manual - Page 52
    NVR User Manual Click .. Parameter FTP Address FTP Port FTP Mode FTP Username FTP Password www.foscam.com Description  If your FTP server is located on the LAN, manually through FTP server. Here supports two modes: PORT and PASV. The user account of FTP server. The user password of FTP server. 51
  • Foscam FN3104H | User Manual - Page 53
    NVR User Manual Click Save button to take effect. Click FTP Test to see if FTP has been successfully configured. If the Menu interface. The Display interface is displayed.You can configure the display mode, Resolution, Transparency, Mouse Sensitivity and Interval for the NVR. www.foscam.com 52
  • Foscam FN3104H | User Manual - Page 54
    NVR User Manual Parameter Description The NVR system supports the display mode in the live view. Display Mode  1*1080P: After this item is selected, an IPC device is displayed on the NVR preview interface and IPC devices with the resolution of up to 1080P are supported the NVR system transmits
  • Foscam FN3104H | User Manual - Page 55
    NVR User Manual  The Icon indicate alarming but not recording, when IO alarm was triggered.  The Icon indicate recording and alarming, when IO alarm was triggered. Step1 Select the Alarm Input from drop-down box and If you clear the area, then drag and draw the area by mouse. www.foscam.com 54
  • Foscam FN3104H | User Manual - Page 56
    NVR User Manual is triggered, you can choose whether to enable buzzing sound of the NVR device. Alarm output When the IO Alarm is triggered, you can choose you have set FTP. Linkage Record Channel Check the checkbox to start recording for the certain channel. Step6 Click Save button to
  • Foscam FN3104H | User Manual - Page 57
    NVR User Manual 【Motion Detection】 Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes place, the NVR can analyze it and perform many actions to handle it. Enable motion detection function can trigger certain channels to start recording
  • Foscam FN3104H | User Manual - Page 58
    NVR User Manual Step3 Check the checkbox to select the linkage method. You may refer to follow table for details of linkage methods. Parameter Record IPC Sound Alarm Buzzer Alarm Output Send E-Mail FTP Description If you select this checkbox, when the Motion detection is triggered, the NVR will
  • Foscam FN3104H | User Manual - Page 59
    NVR User Manual 3．Right-click with your mouse to save and quit. When something moving in the detection area, the NVR will alarm. Step5 Set Detection Schedule 1．Click Settings button for the detection schedule. Set area, then drag and draw the area for motion detection by mouse. www.foscam.com 58
  • Foscam FN3104H | User Manual - Page 60
    NVR User Manual 4． Click the OK button to save and exit the window. Step6 Select the Sensitivity from the drop-down box list. You can drag the time bar to select the detection interval and record time. Parameter Description Sensitivity The higher the sensitivity, the NVR will be more easily
  • Foscam FN3104H | User Manual - Page 61
    NVR User Manual Choose "Menu > Settings > Alarm Settings > Other Alarm" in the Menu list. It contains HDD Loss, HDD Saturation, HDD Error, Video Loss and Network Error. Check the Buzzer checkbox if you want to enable buzzing sound of the NVR device. Click Save button to take effect. OSD Choose "
  • Foscam FN3104H | User Manual - Page 62
    NVR User Manual Parameter Channel Channel Name Display Channel Name Display Time Enable OSD Description Select the channel from the drop-down list. It displays MJ or IPC protocol type is ONVIF, the feature is invalid. 1． Click Select Shelter Area button and it pop up a window. www.foscam.com 61
  • Foscam FN3104H | User Manual - Page 63
    NVR User Manual 2．Drag and draw the area for privacy zone by left mouse. Note:To > System" in the Menu interface. The System interface is displayed. You can manage the NVR device about User Account, Upgrade, Factory Reset, Para export, Auto Restore, Log Out, Reboot, Shutdown. www.foscam.com 62
  • Foscam FN3104H | User Manual - Page 64
    NVR User Manual User Account Choose "Menu > System > User Account" in the Menu interface. The User account management interface is displayed. User levels by permission from low to high are visitor, operator, administrator. Different user levels have different operating permission.The default user
  • Foscam FN3104H | User Manual - Page 65
    NVR User Manual After configure the username, password and competence, you need to check Enable checkbox. Then click Save button to take effect. Upgrade First, a mobile storage device needs to be inserted by the USB interface and the NVR system upgrade file upgrade.bin has been stored in the root
  • Foscam FN3104H | User Manual - Page 66
    NVR User Manual Factory Reset Choose "Menu > System" in the Menu interface, then click Factory Reset in the System interface. Click OK button in the pop-up message box and all parameters will return to factory settings. Click OK button and then the NVR device will reboot automatically. Para export
  • Foscam FN3104H | User Manual - Page 67
    NVR User Manual Auto Restore Choose "Menu > System > Auto Restore" in the Menu interface. The Auto Restore interface is displayed. You can configure the Date and Time. The NVR will maintain system at the setting time. Log Out After logging out, the monitor turns to the live view mode and if you want
  • Foscam FN3104H | User Manual - Page 68
    NVR User Manual 4 Web You can access and manage the NVR on a PC through Web browser. 4.1 Instructions before Login Before accessing the NVR by using the Web browser, you need to obtain the following information:  The NVR and the PC must be connected to the same LAN and are in the same network
  • Foscam FN3104H | User Manual - Page 69
    NVR User Manual 、 Note If there are multiple devices, you need to obtain the IP address and port of the NVR using the local GUI. For details, see "3.4.5 Settings > Network". Step4 Double-click the NVR, and your default browser will open up to the NVR follow the installation instructions. (Please
  • Foscam FN3104H | User Manual - Page 70
    NVR User Manual Step6 Input the follow parameter. Parameter Description Username/Pass The user name and password of the NVR client. word The default administrator username is admin with a blank password, please set the new username or password at first using and prevent unauthorized users
  • Foscam FN3104H | User Manual - Page 71
    NVR User Manual 4.3 Live Video After login, the live view interface will display. You can configure the play/stop the live view, manual recording, manual capturing, preset, cruise, led, color and so on. 1 2 3 4 Section Icon 1 2 www.foscam.com Name Description Live Video Click this button and
  • Foscam FN3104H | User Manual - Page 72
    NVR User Manual 3 Play Stop Take Snapshot Record PTZ Preset Play an IPC monitoring video in a channel of the NVR. By default, the video is played. Stop playing the monitoring video in the channel. Select the channel, click this button, and you can take a snapshot of the monitoring video page of a
  • Foscam FN3104H | User Manual - Page 73
    NVR User Manual Setting Cruise 4 ways cruise Previous channel next channel Interval Full Screen Click this button, It will display four channels in the live view interface. Click this button, and monitoring pages of NVR channels are displayed cyclically. When the system switches to the monitoring
  • Foscam FN3104H | User Manual - Page 74
    NVR User Manual Step1 Select one track in the track drop- . The preset position cannot contain special characters. Then click to save it. If you want to reset the preset position, click . You can move the IP camera and stop at another place, and will go to the preset position. www.foscam.com 73
  • Foscam FN3104H | User Manual - Page 75
    NVR User Manual 4.4 Parameter Configuration Choose " (Parameter Configuration)", you can configure the Local Settings, Settings, Service Configuration, User Management, System Management and so on. 4.4.1 Local Settings Firmware Version You can view the NVR system information, or modify the Device
  • Foscam FN3104H | User Manual - Page 76
    NVR User Manual Device Name Firmware version Plug-in version The device name is a unique name that you can give to your device to help you identify it. You can change your NVR name. Display the system version of your NVR. Display the plug-in version of your NVR. Click Save button to take effect.
  • Foscam FN3104H | User Manual - Page 77
    NVR User Manual the following NTP settings. Parameter System Time Date Format Time Format Description There are two different ways for the date format to synchronize the date and time of the NVR.  input the date and time manually. .  Click Sync with PC button to synchronize the date and time of
  • Foscam FN3104H | User Manual - Page 78
    NVR User Manual Parameter Network Type HTTP Port HTTPS Port IP Address Subnet Mask Gateway Primary DNS Server Alternative DNS Server UPNP Description You can select the network type from the drop-down list box.  If select the DHCP, the NVR system will automatically obtain an IP address and other
  • Foscam FN3104H | User Manual - Page 79
    NVR User Manual to either an intranet or the Internet depending on the location of the e-mail accounts to which you want to send notification. Step1 Choose " displayed. (Parameter Configuration) > Local settings > Email". The Email page is Step2 Configure the Email parameter. www.foscam.com 78
  • Foscam FN3104H | User Manual - Page 80
    NVR User Manual Parameter Enable E-Mail Authentication SMTP Server SMTP Port Transport Layer Security SMTP Username SMTP Password Sender First/Second is detected etc.. Step1 Choose " (Parameter Configuration) > Local settings > FTP Settings". The FTP Settings page is displayed. www.foscam.com 79
  • Foscam FN3104H | User Manual - Page 81
    NVR User Manual Step2 Configure the FTP parameter. Parameter FTP Address Description  the server connection port accordingly. FTP Mode Here supports two modes: PORT and PASV. FTP Username The user account of FTP server. FTP Password The user password of FTP server. Step3 Click Save button
  • Foscam FN3104H | User Manual - Page 82
    NVR User Manual displayed. Note Here take test.myfoscam.org for example. Enable DDNS：Check the DDNS checkbox to enable this feature. Click Save button to take effect. Then you can use http:// Domain name + HTTP Port to access the NVR via internet. Third Party DDNS： You can also use third part DDNS,
  • Foscam FN3104H | User Manual - Page 83
    NVR User Manual Parameter Channel Resolution Bit Rate Frame Rate Key Frame Interval Description You can select the channel for the IP Cameras. The resolution of the IP Camera. The higher the resolution is,the sharper the video better video quality, but at the cost of higher network bandwidth
  • Foscam FN3104H | User Manual - Page 84
    are supported IP cameras in the same network segment of a LAN with NVR, you may add it in one button with IP Camera's user name, password and port number. 【Auto Adding IPC】 Choose " (Parameter Configuration) > Device Management > IP Camera Setup". The IP Camera Setup page is displayed. www.foscam
  • Foscam FN3104H | User Manual - Page 85
    NVR User Manual Step1 You can see all IP Cameras searched in LAN IPC list. Step2 Select one channel from Channel01, Channel02, . Step4 Input the Username and Password of the IPC. Step5 Click Add button to finish adding. -------End 【Manually Adding IPC】 Step1 Select any one of the four channels. www
  • Foscam FN3104H | User Manual - Page 86
    NVR User Manual Step2 Step3 Input the Device Name, Host, HTTP Port, Username and Password of the IPC. Click Add button to finish adding. Hard Disk Information You can configure the Disk Saturation, Pre-recorded to initialize the disk for recording. Note: Initializing the HDD will erase all
  • Foscam FN3104H | User Manual - Page 87
    NVR User Manual  Disk Saturation:When the disk is saturated, you can choose to stop recording or cycle coverage.  Pre-record Time:The time you set to record before the event. For example, when an alarm triggered the recording at 11:00, if you set the pre-record . 4.4.3 Service Configuration Motion
  • Foscam FN3104H | User Manual - Page 88
    NVR User Manual In the live view mode, there are icons at the right bottom of the screen for each channel. The Icon indicate alarming but not recording, when motion detection was triggered. The Icon indicate recording and alarming, when motion detection was triggered. You can follow the steps to
  • Foscam FN3104H | User Manual - Page 89
    NVR User Manual The Detection Interval time between two motion detection. Step4 Check the checkbox to select the linkage method. You may refer to follow table for details of linkage methods. Parameter Alarm output Send E-Mail FTP Record Record Time Buzzer IPC Sound Alarm Description When the IO
  • Foscam FN3104H | User Manual - Page 90
    NVR User Manual 2．Drag and draw the area for motion detection by left mouse. Note:To clear the motion detection area, Drag and draw the motion detection area by left mouse. 3．Click OK button to save and quit. When something moving in the detection area, the NVR NVR will alarm. www.foscam.com 89
  • Foscam FN3104H | User Manual - Page 91
    NVR User Manual Click here  Choose one day Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of here  Choose the Certain Time Period Press the left mouse and drag it on the time boxes, you can select the serial area. www.foscam.com 90
  • Foscam FN3104H | User Manual - Page 92
    NVR User Manual Step7 Click Save button to take effect.. When the motion has been detected during the detection time in the detection area, the NVR will alarm and adopt the corresponding alarm linkage. Note: You must set the detection area and detection schedule, or else there is no alarm anywhere
  • Foscam FN3104H | User Manual - Page 93
    NVR User Manual Step2 Select channel from drop-down box list. Step3 Select Open or Off for the Enable schedule record. Step4 Set Recording schedule time of the channel. You can choose a week, one day of a week, the certain time period for the recording. For detailed procedure, please refer to Motion
  • Foscam FN3104H | User Manual - Page 94
    NVR User Manual Step2 Select the Alarm Input from drop-down box list. Step3 Check the Enable checkbox to enable IO Alarm function. Step4 Set the Duration from
  • Foscam FN3104H | User Manual - Page 95
    NVR User Manual Parameter Buzzer Send E-mail FTP Alarm output Link Record Channel Description When the IO Alarm is triggered, you can choose whether to enable buzzing sound of the NVR the checkbox to start recording for the certain channel. to "4.6.3 Service Configuration > Service
  • Foscam FN3104H | User Manual - Page 96
    User Manual Step4 Click Save button to take effect. -------End OSD You can configure the OSD (On screen Display) information of the NVR. Step1 Choose " displayed. (Parameter Configuration) > Service Configuration > OSD",The OSD page is Step2 You can configure the follow parameters. www.foscam
  • Foscam FN3104H | User Manual - Page 97
    NVR User Manual Parameter Channel Display Mode Channel name Display Channel Name Display Time Description You can select one channel from drop-down box list.. Display mode of system preview page of the NVR.  1*1080P: After this item is selected, an IPC device is displayed on the NVR preview
  • Foscam FN3104H | User Manual - Page 98
    NVR User Manual Camera. Step1 Choose " (Parameter Configuration) > Service Configuration > Pan & Tilt Speed". The Pan & can manage the cruise of the IP camera. Choose " (Parameter Configuration) > Service Configuration > Cruise Settings". The Cruise Settings page is displayed. There are two default
  • Foscam FN3104H | User Manual - Page 99
    NVR User Manual 【Add Cruise Track】 1．Select channel from drop-down box list. 2．Click Add button and enter a descriptive name to identify the to add two or more preset points to the cruise track. How to customize the preset, please refer to "4.3 Live Video > Preset settings". www.foscam.com 98
  • Foscam FN3104H | User Manual - Page 100
    NVR User Manual There are other buttons between the Preset points and Cruise track, you can use these buttons to adjust the order of preset points or the cruise track, back to the surveillance window of IP Camera, select Cruise, here you can see all cruise tracks you have added. www.foscam.com 99
  • Foscam FN3104H | User Manual - Page 101
    NVR User Manual 【Query Cruise Track】 1．Select channel from drop-down box list. 2． User Management User Account User levels by permission from low to high are visitor, operator, administrator. Different user levels have different operating permission.The default user name of device www.foscam.com
  • Foscam FN3104H | User Manual - Page 102
    NVR User Manual administrator is admin with no password. The administrator has the permission to add and delete all users and configure user parameters. You can add, modify, delete username/password or distribute authority for users the settings and the added new user will be displayed on the list.
  • Foscam FN3104H | User Manual - Page 103
    NVR User Manual 4.4.5 System Management Import/Export You can import or export a configuration file for NVR modifying or upgrading firmware. Click Backup button and the configuration files of the NVR will be the import of configuration files, the NVR device will reboot automatically. Note  Do
  • Foscam FN3104H | User Manual - Page 104
    NVR User Manual configuration file is uploaded the NVR may not work. Upgrade Choose " (Parameter Configuration) > System Management > Upgrade". The Upgrade page is displayed. Click Browse to select the upgrade file in the local directory. Click Upgrade to start upgrade. Don't shut down the power
  • Foscam FN3104H | User Manual - Page 105
    NVR User Manual Reboot Choose " (Parameter Configuration) > System Management > Reboot". The Reboot page is displayed. Click Reboot button, then click OK button in the pop-up message box.The NVR system will reboot. Auto Restore Choose " (Parameter Configuration) > System Management > Auto Restore".
  • Foscam FN3104H | User Manual - Page 106
    NVR User Manual 1: Select a date with recording in calendar. 2: Select the Record Type, and check the checkbox from the Channel01, Channel02, Channel03 and Channel04. 3: Click Search button to search the matched recorded page. For example, ">> X2" indicates the current playing www.foscam.com 105
  • Foscam FN3104H | User Manual - Page 107
    NVR User Manual speed is twice of the normal speed. Slow progress. The slow progress speed the "Web > Parameter configuration > Settings > Storage Location". Full screen. Make the playing video maximized. After the video is maximized, press ESC to exit full screen. 4：Playback time You can move the
  • Foscam FN3104H | User Manual - Page 108
    NVR User Manual 5 Appendix 5.1 HDD Capacity Calculation This chapter describes how to determine the size of the HDD you need when you install the NVR for the first time. The NVR adopts the MPEG4/H.264 compression technology and its dynamic range is large. Therefore, the capacity of the HDD
  • Foscam FN3104H | User Manual - Page 109
    NVR User Manual recording is needed, you can calculate the HDD capacity by using the following formula: Recording time（hour）=7days*24 hours=168 hour Spent of HDD Capacity per hour(M/hour)= 4Mbit 8bit Firstly: Login on www.no-ip.com and click No-IP Free to register. www.foscam.com 108
  • Foscam FN3104H | User Manual - Page 110
    NVR User Manual Click here to register . Figure 4.27 Please register an account step by step according to instructions on www.no-ip.com. After registration, please login your email which used to register. You will receive an email from website, www.foscam.com 109
  • Foscam FN3104H | User Manual - Page 111
    NVR User Manual please click the link to activate your ACCOUNT as indicated in email. Secondly: Login the link with the registered username and password to create your domain name. Figure 4.28 Please create the domain name step by step according to instructions on www.no-ip.com www.foscam.com 110
  • Foscam FN3104H | User Manual - Page 112
    NVR User Manual Step 2, DO DDNS Service Settings within the NVR Please set DDNS Settings within the NVR by hostname, a user name and password you've got from www.no-ip.com Take hostname ycxgwp.no-ip.info, user name foscam, password foscam2012 for example. Firstly, goes to option of DDNS Settings on
  • Foscam FN3104H | User Manual - Page 113
    NVR User Manual Assign a name as you like Fill the Media Port no. of the camera on the 2. Configure the IP Parameters Here we take TP-LINK router as an example.  The IP address of the NVR must be in the range of the router address pool. Log in to the router client through the browser and select
  • Foscam FN3104H | User Manual - Page 114
    NVR User Manual  The subnet mask of the NVR must be the same as the subnet mask in LAN port status. The default gateway of the NVR is the same as the IP address in LAN port status. The primary DNS and secondary DNS can be the same as the DNS in WAN port status. www.foscam.com 113
  • Foscam FN3104H | User Manual - Page 115
    NVR User Manual 5.3 Specifications ITEMS FN3004H Video Input IP Video Input 4-ch 720P/960P HD IP Camera Capitable Camera Foscam HD IP Cameras and other brand ONVIF-embedded cameras supported Foscam MJPEG cameras to be added by firmware upgrade Video Output Decoding Resolution (1080P)1920 x
  • Foscam FN3104H | User Manual - Page 116
    , RoHS Warranty Limited 2-year warranty ITEMS FN3104H Video Input IP Video Input 4-ch 720P/960P HD IP Camera Capitable Camera Foscam HD IP Cameras and other brand ONVIF-embedded cameras supported Foscam MJPEG cameras to be added by firmware upgrade Video Output Decoding (1080P)1920 x 1080
  • Foscam FN3104H | User Manual - Page 117
    NVR User Manual Synchronous up to 4-ch Video Storage Schedule Recording, Alarm Recording Video Playback 4-ch 720P synchronous video playback PTZ Supports Pan/Tilt/Zoom control Camera Search camera in LAN, add camera, and manage a camera list Search/Managem ent Camera Settings Network, video
  • Foscam FN3104H | User Manual - Page 118
    NVR User Manual Power Power Supply DC 12V/3.0A Physical Dimension(LxWx 220(L)*188.5(W)*39(H) mm H) Environment Operating -20° ~ 55°C (-4°F ~ 131°F) Green） 4TB 7200RPM 64MB SATA3（ Black） Seagate WD40EURX ST500DM002 4TB 7200RPM 64MB SATA3 500GB 7200RPM 16MB SATA3 www.foscam.com 117
  • Foscam FN3104H | User Manual - Page 119
    NVR User Manual Brand Model Description ST1000DM003 1TB 7200RPM 64MB SATA3 ST1000VX000 1TB Seagate Expansion 4TB, Mobile Hard Disk 5400RPM USB3.0 List of Third-party IP Cameras The FOSCAM NVR supports its private protocol and ONVIF protocol. It is suggested that using the third party brand
  • Foscam FN3104H | User Manual - Page 120
    NVR User Manual the device (e.g. if the output mode of NVR is HDMI output, then the input mode of monitor. 2. No record file found in the NVR local HDD, and prompt "No record file found".  Verify GUI interface, view the HDD status. 3. Why recording is not performed after motion detection is enabled?
  • Foscam FN3104H | User Manual - Page 121
    NVR User Manual  Check whether a trigger time segment is set.  Check whether a detection area is set.  Check whether recording is selected. 4. Why doesn't the monitor respond when I operate the remote control?  Check the battery of the remote control (positive and negative poles or battery
  • Foscam FN3104H | User Manual - Page 122
    NVR User Manual video files are downloaded. 9. Why does the Web client prompt TIME OUT after you enable or disable UPNP in network settings of computer. Please add the NVR as a trusted site to resolve the video of the corresponding channel has lost not more than NVR display mode. For example: NVR display mode for
  • Foscam FN3104H | User Manual - Page 123
    and right, tilt up and down and zoom in and out. Network Time Protocol A protocol designed to synchronize the clocks of computers over a network. Network Video Recorder An NVR can be a PC-based or embedded system used for centralized management and storage for IP cameras. www.foscam.com 122
  • Foscam FN3104H | User Manual - Page 124
    NVR User Manual used in accordance with the installation manual, may cause harmful interference to radio harmful interference, in which case the user will be required to correct the interference the party responsible for compliance could void the user's authority to operate this equipment. CE Mark
  • Foscam FN3104H | User Manual - Page 125
    system, software that included in the CD,etc.  Usage that is not in accordance with product instructions.  Failure to follow the product instructions.  Abuse firmware upgrade without the authorized technician's guidance.  Normal wear and tear. Return Procedures  Please read FOSCAM warranty
  • Foscam FN3104H | User Manual - Page 126
    NVR User Manual problem of the product) on the warranty card along with the complete package to send them back. Replacement Services  If customers ask for replacement service provide exchange and replacement due to normal hardware upgrade according the market after 14 days after the foscam.com 125
  • Foscam FN3104H | User Manual - Page 127
    NVR User Manual  Warranty is void for mishandling, improper use, or defacing the product.  Abuse firmware upgrade without the authorized replacement limit but still in warranty limit. Repair Service Out Of Warranty  FOSCAM provide extra repair service for product that out of warranty, it is
  • Foscam FN3104H | User Manual - Page 128
    with the NVR is enjoyable and easy to use, you may experience some issues or have questions that this User's Guide has not answered. If you have problem with FOSCAM device, please first contact FOSCAM reseller for solving the problems. If our reseller cannot provide service, please contact
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
Network Video Recorder
User Manual
Model: FN3004H
Model: FN3004H
Color: Black
Color: White
Model: FN3104H
Version:V1.2