Frigidaire FFHT1822UV Aftermarket Installation Information
Frigidaire FFHT1822UV Manual
View all Frigidaire FFHT1822UV manuals
Add to My Manuals
Save this manual to your list of manuals |
Frigidaire FFHT1822UV manual content summary:
- Frigidaire FFHT1822UV | Aftermarket Installation Information - Page 1
AUTOMATIC ICE MAKER INSTALLATION INSTRUCTIONS An authorized service technician is recommended to install the ice maker kit. WARNING • To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator - Frigidaire FFHT1822UV | Aftermarket Installation Information - Page 2
Ice Maker Installation Instructions 1. Unplug refrigerator from electrical outlet. 2. Lift the freezer shelf up and out. Set aside. See Figure 1. 5. Insert the ice maker connector and wire through the - Frigidaire FFHT1822UV | Aftermarket Installation Information - Page 3
Ice Maker Installation Instructions 7. Remove the silicone paper on the foam pads. Stick the ring shaped foam pad to the fill tube. See Figure 7. Align the fill tube key - Frigidaire FFHT1822UV | Aftermarket Installation Information - Page 4
Ice Maker Installation Instructions 10. To install the ice bin, the freezer shelf needs to be in the lowest position. Slide the ice bin between the side wall and - Frigidaire FFHT1822UV | Aftermarket Installation Information - Page 5
of the cover. See Figure 20. Power cord Water line Figure 19 Figure 20 17. Connect the household water line to the water valve. Follow instructions in Connecting Ice Maker to Water Supply. Connecting Ice Maker to Water Supply WARNING To avoid electric shock, which can cause death or severe - Frigidaire FFHT1822UV | Aftermarket Installation Information - Page 6
Connecting Ice Maker to Water Supply NOTE Water lines should be long enough to all ow the refrigerator to roll forward for cleaning or service. Typically, 6 ft. length works well for braided Stainless or Poly kits. A ¼" copper line should be longer to coil extra length behind the refrigerator so - Frigidaire FFHT1822UV | Aftermarket Installation Information - Page 7
Ice Service If your refrigerator has an automatic ice maker, minimal ice will be produced during the first 24 hours of operation. Air in new plumbing lines
AUTOMATIC ICE MAKER
INSTALLATION INSTRUCTIONS
P/N:
A23224101
WARNING
• To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator
from electrical power before connecting a water supply line to the refrigerator.
• Connect the ice maker to a potable water supply only.
An authorized service technician is recommended to install the ice maker kit.
Ice Maker (IM117000v2) Kit Components
5304520536
Ice Maker
QTY: 1
5304525288
Shoulder Screw
QTY: 5
5304520538/5304520539
Cover with Door
QTY: 1
5304520535
Ice Bin
QTY: 1
Parts needed for install inside the unit
Tools Needed:
• Flat head screw driver
• Phillips or Quadrex driver
• ¼
" Hex driver
• Gloves
• Drill
• Needle nose pliers
Parts needed for install on back side of the unit
NOTE
Check with your local building authority for recommendations on water lines and associated materials prior
to installing your new refrigerator. For household water line hookup from the home water supply system to
the unit, we recommend for homes with existing valves
Smart Choice®
water line kit 5304437642 (with a 6'
Stainless Steel Water Line) and for homes without an existing valve, we recommend
Smart Choice®
water
line kit 5304493869 (with a 6' Polyline Waterline). Please refer to Frigidaire.com for more information.
5304520540
Water Valve
QTY: 1
218976923
Tube
QTY: 1
241500304
#8 screw
QTY: 2
5304455846
Clamp
¼
"
QTY: 1
5303001193
Clamp
½
"
QTY: 1
A22628901
Fill Tube
QTY: 1
A23297701
Screw
QTY: 2
A23221901
Foam Pad
QTY: 1
A23222001
Foam
Rectangle
QTY: 1