Frigidaire FFRA122ZA1 Installation Instructions

Frigidaire FFRA122ZA1 Manual

Get Frigidaire FFRA122ZA1 PDF manuals and user guides View all Frigidaire FFRA122ZA1 manuals
Add to My Manuals
Save this manual to your list of manuals

Frigidaire FFRA122ZA1 manual content summary:

  • Frigidaire FFRA122ZA1 | Installation Instructions - Page 1
    Installation Instructions READ BEFORE INSTALLING UNIT BL Window Mounting (10,000 - 12,000 BTU) INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. be exposed: Carefully inspect location where air conditioner will be installed. Be sure it will support the
  • Frigidaire FFRA122ZA1 | Installation Instructions - Page 2
    Installation LEFT + RIGHT FILLER PANEL ASSEMBLY NOTE: Top Rail and Side Panels at each side are offset to provide the proper pitch to the rear. This is necessary for proper condensed water utilization and drainage. If you are not using the Side Panels for any reason, this pitch to the rear must be
  • Frigidaire FFRA122ZA1 | Installation Instructions - Page 3
    Installation Keep a firm grip on the air conditioner, carefully place the unit into the window opening so the bottom of the air conditioner frame is against the window sill (FIG. 6A & FIG. 6B). Carefully close the window behind the top rail of the unit. FIG. 6A FIG. 6B INSIDE OUTSIDE INSIDE
  • Frigidaire FFRA122ZA1 | Installation Instructions - Page 4
    Installation NOTE: It is difficult to lock the windows with the sash lock for Vinyl-Clad windows, so you can use lock by window itself. Cut foam window seal and insert it into the space between the upper and lower sashes (FIG. 11). FIG. 10 FIG. 11 FOAM SEAL Check that air conditioner is tilted
  • 1
  • 2
  • 3
  • 4
READ BEFORE INSTALLING UNIT
BL Window Mounting (10,000 - 12,000 BTU)
1
Installation Instructions
Before installing, the top rail must be assembled on the unit.
The top rail on your unit may already be installed. If not,
follow the steps below.
Top Rail Hardware
Qty.
4
1
Top Rail
Drill (If pilot holes are needed)
7
1
Mounting Hardware
Qty.
2
(For Vinyl-Clad windows)
NOTE:
the best way to store unit during winter, or when not
in use.
2
(For Wooden windows)
Top Rail
Fig. C
weather seals
5
window sash seal foam
1
be exposed:
Carefully read the installation manual before beginning.
INSTALLATION WARNINGS AND CAUTION
Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit over an extended
period of time.
66129926909
Fig. B