Home » Frigidaire Manuals » Air Conditioners » Frigidaire FRA106HT2 » Manual Viewer

Frigidaire FRA106HT2 Complete Owner's Guide (English)

Frigidaire FRA106HT2 Manual

UPC - 012505274039

View all Frigidaire FRA106HT2 manuals

Add to My Manuals
Save this manual to your list of manuals

Frigidaire FRA106HT2 manual content summary:

Frigidaire FRA106HT2 | Complete Owner's Guide (English) - Page 1
of your Room Air Conditioner TABLE OF CONTENTS Important Safety Instructions 2 Product Registration 3 Normal Sounds 3 Air Conditioner Features 4 Operating Instructions 4-9 Care and Cleaning 9 Energy Saving Ideas 9 Before You Call 10 Major Appliance Warranty 11 www.frigidaire.com USA
Frigidaire FRA106HT2 | Complete Owner's Guide (English) - Page 2
specific operating instructions for your model. Use the room air conditioner only as instructed in this USE & CARE MANUAL. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating, and
Frigidaire FRA106HT2 | Complete Owner's Guide (English) - Page 3
sound of rushing air being moved by the fan. High pitched Chatter Today's high efficiency compressors may have a high pitched chatter during the cooling cycle. Vibration Unit may vibrate and make noise because of poor wall or window construction or incorrect installation. Gurgle/Hiss "Gurgling
Frigidaire FRA106HT2 | Complete Owner's Guide (English) - Page 4
Air Conditioner Features & Operating Instructions Air Conditioner Features ELECTRONIC CONTROL Before you w/DISPLAY & REMOTE SENSING BUTTON FOR HEAT MODELS Operating Instructions NOTE The following instructions represent the Touch Pad, the same instructions can be used for the Remote Control
Frigidaire FRA106HT2 | Complete Owner's Guide (English) - Page 5
function is deactivated in the heating mode on 115V models. TO OPERATE ON FAN ONLY: YOU WILL SEE: DO THIS: PRESS MODE BUTTON CHOOSE FAN ONLY Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on some models. (Remember to open the
Frigidaire FRA106HT2 | Complete Owner's Guide (English) - Page 6
Operating Instructions Operating Instructions (continued) TO USE THE ENERGY SAVER FEATURE: YOU WILL SEE selects cooling with maximum Fan speed (if Cool, Energy Saver, or Fan Only was the last mode selected) or heating with maximum Fan speed (if Heat was the last mode selected. Note: On 115V models
Frigidaire FRA106HT2 | Complete Owner's Guide (English) - Page 7
Instructions YOU WILL SEE: DO THIS: PRESS FILTER RESET BUTTON Note: This feature is a reminder to clean the Air ONLY, the unit must be in a cooling mode. To activate the remote sensing feature, unit. HEATING FEATURE(on some models)ğ YOU WILL SEE: DO THIS: PRESS MODE BUTTON SELECT HEAT Note:
Frigidaire FRA106HT2 | Complete Owner's Guide (English) - Page 8
Instructions Operating Instructions (continued) FAULT CODES: If the display reads "HS" , a sensor has failed. Contact your Authorized Frigidaire Service Center. If the display reads "AS" , a sensor has failed. Contact your Authorized Frigidaire Service cool mode), 55F and 80F degrees (in heat mode
Frigidaire FRA106HT2 | Complete Owner's Guide (English) - Page 9
the room size for efficient and satisfactory operation. Install the room air conditioner on the shady side of your home. A window that faces north is best because it is shaded most of the day. Close the fireplace damper, floor and wall registers so cool air does not escape up the chimney and into
Frigidaire FRA106HT2 | Complete Owner's Guide (English) - Page 10
- poor installation. Refer to installation instructions or check with installer. Improper installation. Tilt air conditioner slightly to the outside to allow water drainage. Refer to installation instructions or check with installer. Water dripping OUTSIDE when unit is cooling. Unit removing
Frigidaire FRA106HT2 | Complete Owner's Guide (English) - Page 11
in accordance with the provided instructions. 8. Service calls to correct the installation of your appliance or to instruct you how to use your during installation, including but not limited to floors, cabinets, walls, etc. 13. Damages caused by: services performed by unauthorized service companies;