Frigidaire FRA12EZT2 Installation Instructions (All Languages)
Frigidaire FRA12EZT2 Manual
UPC - 012505274374
View all Frigidaire FRA12EZT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Frigidaire FRA12EZT2 manual content summary:
- Frigidaire FRA12EZT2 | Installation Instructions (All Languages) - Page 1
the sharp metal fins of front and rear coils. Make sure air conditioner does not fall during installation. Tools and Parts: Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. TOOLS NEEDED Flat-blade and Phillips - Frigidaire FRA12EZT2 | Installation Instructions (All Languages) - Page 2
for correct installation. Grounded electrical outlet within 4 ft (122 cm) of where the power cord exits the air conditioner. Free movement of air in room to be cooled. A large enough opening for the air conditioner. Adequate wall support for weight of air conditioner. Air conditioner weights between - Frigidaire FRA12EZT2 | Installation Instructions (All Languages) - Page 3
Installation Instructions FIG.3 FIG.4 FIG.5 B A A. shipping screw B B. front panel screw C C. handle NOTE: Handle the air conditioner gently. Be sure your air conditioner cabinet does not fall out of the opening during installation or removal. The place where the power cord exits the air - Frigidaire FRA12EZT2 | Installation Instructions (All Languages) - Page 4
Installation Instructions $WWDFKIRDPDGKHVLYHVHDO $WWDFKIRDPDGKHVLYHVHDODORQJWKHERWWRPRIWKHFXUWDLQERWWRPFKDQQHO),* FIG.8 FIG.9 $QJOHRIFDELQHW EUDFNHWVHFXUHO\VHDWHG on - Frigidaire FRA12EZT2 | Installation Instructions (All Languages) - Page 5
Installation Instructions Complete Installation window in place (FIG.15). 5. Insert air conditioner into cabinet (FIG.16). 6. Insert front Install Wood Frame: 1. Construct the wood frame. See FIG.20 for dimensions. 2. Measure the outside width and height of frame to determine wall opening dimensions - Frigidaire FRA12EZT2 | Installation Instructions (All Languages) - Page 6
Installation Instructions NOTE: FIG.21 A Dimension for depth depends on wall thickness and type of molding B (FIG.21). Do not block louvers in air conditioner cabinet. 8VHƎFP RUWKLFNHUOXPEHUIRUZRRGIUDPH C A. Outside width C. Depth B. Outside height Install Cabinet into Wood
READ BEFORE INSTALLING UNIT
For SLO3 Air Conditoner (8K~12K BTU)
1
Installation Instructions
To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp
edges that may be exposed:
Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to
move and install the unit. To prevent injury or strain, use proper lifting and carrying techniques when moving unit.
Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit over
an extended period of time.
Handle air conditioner with care. Wear protective gloves whenever lifting or carrying the unit. AVOID the sharp
metal fins of front and rear coils.
Make sure air conditioner does not fall during installation.
Tools and Parts:
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools
listed here.
Flat-blade and Phillips screwdrivers
Level
TOOLS NEEDED
Tape measure
,
Through-the-wall Installation:
In addition to the tools listed above, the following tools are needed for through-the-wall installation.
saw
caulk
TOOLS NEEDED
Parts Supplied:
Check that all parts are included in parts package:
Hardware
Qty.
3
pan - head
Phillips screws
Qty.
1
1
round - head
screws
pan - head
Phillips screws
Top channel
Window sash seal
window lock bracket
Hardware
1
Foam seal
1
side curtains
2
2
Safety Lock
(for Vinyl-Clad window)
weather seals