Fujitsu U820 U810 Docking Cradle User's Guide
Fujitsu U820 - LifeBook Mini-Notebook - Atom 1.6 GHz Manual
 |
UPC - 611343083539
View all Fujitsu U820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Fujitsu U820 manual content summary:
- Fujitsu U820 | U810 Docking Cradle User's Guide - Page 1
Fujitsu Computer Systems Corporation Docking Cradle User's Guide This user's guide contains information on your Docking Cradle with your Fujitsu LifeBook®. We strongly recommend that you read this guide before using the Docking Cradle even if you are already familiar with such accessories. Device - Fujitsu U820 | U810 Docking Cradle User's Guide - Page 2
FRONT/RIGHT SIDE COMPONENTS The following is a brief description of the Docking Cradle's front and right side components. (Figure 1) Docking Connector The docking connector mates with the connector on the bottom of the LifeBook to connect the two electronically. USB Port There are four USB 2.0 ports - Fujitsu U820 | U810 Docking Cradle User's Guide - Page 3
-45 cable. Note that when your notebook is connected to the Docking Cradle, the docking connector on the system (to which you would ordinarily attache the LAN/monitor adapter cable) is not accessible; the Docking Cradle LAN port is the only one that can be used when attached to the system. Stability - Fujitsu U820 | U810 Docking Cradle User's Guide - Page 4
THE DOCKING CRADLE The Docking Cradle can be attached to your notebook while the power is on or off, and while in suspend mode. The AC adapter must be plugged into the Docking Cradle in order to use all of the ports. If the adapter is connected to the system, several of the Docking Cradle ports - Fujitsu U820 | U810 Docking Cradle User's Guide - Page 5
, while in suspend mode, or while the power is off. To detach the Docking Cradle follow these steps: 1. Simply lift your Lifebook straight up to detach it from the Docking Cradle. (Figure 4). Figure 4. Detaching the notebook CONNECTING DEVICES Connecting a LAN (RJ-45) Device The LAN (RJ-45) jack is - Fujitsu U820 | U810 Docking Cradle User's Guide - Page 6
. 3. Plug the other end of the cable into a LAN outlet. Figure 5. Connecting the LAN/Docking Cradle Connecting an External Video Device 1. Align the external video cable to the connector on the Docking Cradle (Figure 6). 2. Tighten the two hold-down screws, located on each side of the connector - Fujitsu U820 | U810 Docking Cradle User's Guide - Page 7
Connecting a USB Device There are four USB 2.0 ports on the optional Docking Cradle; one on the right and three on the rear. In order to .. Note that in order for the USB ports on the Docking Cradle to work, the Docking Cradle must be powered using an AC Adapter. Figure 7. Connecting a USB device 7 - Fujitsu U820 | U810 Docking Cradle User's Guide - Page 8
respective owners. Product description data reflects Fujitsu design objectives and is provided for comparative purposes; actual results may vary based on a variety of factors. Specifications are subject to change without notice. © 2007 Fujitsu Computer Systems Corporation. All rights reserved. B5FY
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
1
Fujitsu Computer Systems Corporation
This user’s guide contains information on your Docking Cradle
with your Fujitsu LifeBook®. We strongly recommend that you
read this guide before using the Docking Cradle even if you are
already familiar with such accessories.
Device Ports/Connectors on the Docking Cradle
The Docking Cradle extends the functionality of your LifeBook
by providing the following ports:
•
Four USB 2.0 ports
•
One 15-pin D-SUB connector for external monitor
•
One LAN (RJ-45) port
•
One DC-in connector
•
One docking connector
The Docking Cradle connects to the front edge of the notebook.
Figure 1. Docking Cradle - Front and Right Side
Docking Connector
USB Port
Notebook Easel
Cradle Base
Docking Cradle User’s Guide