Fujitsu V1020 V1020 Getting Started Guide

Air Vents

USB 2.0 Ports

Removable

Dust Filter

Quick Tips

It takes approximately 4 hours to

charge a fully discharged single

battery with unit off or in

suspend mode.

Optimizing Battery Life

• Set power management setting

to Maximize Battery Life.

• Adjust display brightness levels

to lowest comfortable setting.

• Utilize Suspend mode when

not using your notebook.

• Read the Power Management

section in your electronic User’s

Guide for additional features.

Adjusting Display Brightness

• Fn + F6 to decrease brightness

• Fn + F7 to increase brightness

Adjusting Volume

• Fn + F8 to decrease volume

• Fn + F9 to increase volume

Drivers

Look for the latest drivers on the

Drivers and Applications Restore

CD. Right-click the FDU icon and

select “update”, or download

them at us.fujitsu.com/computers.

This convenient guide will lead you through the start-up

process and will also offer some valuable tips.

1. Open the Display Panel

Ensure that your LifeBook is on a hard level surface and that

•

the air vents are not blocked.

Lift the display, being careful not to touch the screen.

•

Adjust the display until it is at a comfortable viewing angle.

•

2. Connect AC Power

Plug the AC adapter into your notebook.

•

Plug the power cord into the AC adapter.

•

Connect the power cord to an electrical outlet.

•

3. Connect to Internet or Network

Connect either a phone cord to the modem jack or an Ethernet

•

cable to the LAN jack on your notebook and to a wall jack

or to an Ethernet router.

Important:

During the setup procedure, do not disconnect the power supply,

•

press any buttons, or use any peripheral devices such as a

mouse, keyboard, or remote control.

•

You should not attach any external devices and do not put a DVD/CD in

your drive until you have gone through the initial power on sequence.

4. Booting the System

Press the Power Suspend/Resume/button (above the keyboard) to

•

turn on the notebook. When you do this for the first time, it will display

a Fujitsu logo on the screen. If you do nothing the system will load

the operating system, and then the Windows Welcome will begin.

5. Register

For Genuine Microsoft

®

Windows

®

XP:

After the operating system has initialized, enter the information

•

as prompted to personalize your notebook and configure your

modem to dial.

For Genuine Windows Vista®:

Accept the Microsoft

•

®

Windows

®

Licensing Agreement and the

Fujitsu End User License Agreement to proceed.

Select your User ID and Password during the “Welcome Screen.”

•

•

Keep a record of your User ID and password stored in a secure place.

•

THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES.

Do not attempt to turn power on or off during this stage.

•

6. Registering Your LifeBook notebook

Register your notebook with Fujitsu Service and Support via our

•

website at us.fujitsu.com/computers.

You will need to be set up with an Internet Service Provider (ISP)

•

to register online.

7. Installing Click Me!

Check to be sure the WLAN switch is on.

•

For Genuine Microsoft

®

Windows

®

XP:

The first time you boot up

your system, you will see an icon called Click Me! in the Start menu.

For Genuine Windows Vista®:

In addition to an icon on the

desktop, a dialog box will automatically open that prompts you

to run Click Me!. If you choose not run ClickMe! at this time,

the ClickMe! icon will remain on your desktop.

When you click the Click Me! icon, your system will automatically

•

build the icon tray in the bottom right of the screen. These icons

provide links to utilities that you will frequently access.

LEFT PANEL

BOTTOM PANEL

RIGHT PANEL

BACK PANEL

CLICK ME

“Click Me!”

(For

Additional

Utilities)

(FDU)

(For

Latest

Drivers)

Controls, Connectors,

and Access Points

Initial Start Up

The Lithium ion battery is not charged upon purchase.

Initially you will need to connect either the AC adapter

or the Auto/Airline adapter to use your notebook.

What’s in the Box

Check to see that all of the following items are in the box:

❏

LifeBook notebook

❏

Lithium ion battery, pre-installed

❏

AC adapter with power cord

❏

DVD Writer drive (installed)

❏

Drivers and Applications Restore DVD

Keyboard

Power/Suspend/Resume Button

Support Button

Status Indicator Panel

Touchpad Pointing Device

Display Panel

Fast Ethernet LAN (RJ-45) Jack

Anti-Theft Lock Slot

8. Install Additional Software

Close any open programs, applications or utilities

•

Insert software application CD into media drive.

Open the application folder, select the

•

set-up icon, and load desired

software, as shown in the table.

Restart your computer.

•

9. Access your User’s Guide

•

To take advantage of all the features of your new Fujitsu LifeBook

notebook, it is highly recommended that you read your electronic

User’s Guide. It contains important detailed information about

your new computer. You can access your User’s Guide by

selecting its icon from the screen desktop.

The Fujitsu Installer should automatically launch. If it doesn’t, you

•

will need to find the Setup.exe file on the Recovery CD’s root folder.

If you are using Genuine Windows Vista®, Click [Allow] in the

•

User Account Control (UAC) box.

Click [Continue]

•

Select “I Agree” and click [Continue] in the License Agreement box.

•

Select “User’s Guide” from the “Utilities/Applications” category.

•

Click [Install Selected Subsystems]

•

The User’s Guide will be copied to your hard drive in the

•

C:\Fujitsu\Manual directory. Shortcuts to the Users Guide

will be placed on your desktop and in the Start menu.

Battery Charge/DC-In Indicator

Orange, solid: AC adapter and battery

are available and system is charging.

Green, solid: AC adapter and battery

are available and system is fully

charged, or AC adapter is plugged

in but battery is not installed.

Orange, blinking: AC adapter and battery

are available and waiting to charge battery

(battery is out of thermal range).

Off: AC adapter is not plugged in.

Battery Level Indicator

The Battery Level indicators display

the charge level of the indicated

battery pack, as follows:

Green, solid: Battery is between 51%

and 100% charged.

Orange, solid: Battery is between 13%

and 50% charged.

Red, solid: Battery is 12% or less charged.

Orange, blinking: Blinks during battery status

measurement

(Four seconds after the

battery is installed).

Red, blinking: There is a problem

with the battery.

Off: There is no battery installed

or the battery has no charge.

Hard Drive/Optical Drive Access Indicator

The Hard Drive/Optical Drive Access indicator

glows green when your internal hard drive is

being accessed. Note that flickering is normal.

NumLk Indicator

The NumLk indicator states that the

integral keyboard is set in ten-key

numeric keypad mode.

CapsLock Indicator

The CapsLock indicator states that

your keyboard is set to type in

all capital letters.

ScrLk Indicator

The ScrLk indicator states that your

scroll lock is active.

Common Indicators

Status Display Panel

The Status Display Panel is located above the keyboard.

Following are some common indicators.

Display Panel Latch Button

Stereo Speaker

Stereo Speaker

ExpressCard

Eject Button

Headphone

Jack

Modem

Jack

SD Card Slot

ExpressCard Slot

DC-in Jack

Optical Drive Release Button

Optical Drive

Emergency Release

Air Vents

(multiple locations)

Memory Upgrade

Compartment

Air Vents

(multiple locations)

Lithium ion

Battery Bay

Wireless LAN/Bluetooth On/Off Switch

USB 2.0 Port

Microphone

Jack

External Video

Jack

Display

Panel

Latch

Button

Wall Jack

DC

Power

Jack

AC Adapter

If you have a:

You will need to install

the following software:

Dual-Layer Multi-Format

CyberLink PowerDirector

DVD Writer

Telephone

Jack

Left

Side

Power/Suspend/

Resume Button

LAN Port

Wireless LAN/Bluetooth

On/Off Switch

If the battery pack is installed while the power is

turned off, the battery level indicator will display the

charge level for five seconds after it blinks orange.

❏

Microsoft

®

associated material

❏

DVD and/or CD-RW application disc

❏

Recovery and Utility Disc: Backup for your preinstalled

Operating System

Fujitsu V1020 V1020 Getting Started Guide

Fujitsu V1020 - LifeBook - Core 2 Duo GHz Manual

Fujitsu V1020 manual content summary: