Ganz Security CMC-25X Manual
Ganz Security CMC-25X Manual
 |
View all Ganz Security CMC-25X manuals
Add to My Manuals
Save this manual to your list of manuals |
Ganz Security CMC-25X manual content summary:
- Ganz Security CMC-25X | Manual - Page 1
safeguards and precautions found on page 2 of this manual. Unpacking Unpack carefully. This is electromechanical equipment and should Service If the unit ever needs repair service, the customer should contact CBC (America) Corp. for a return materials authorization (RMA) and shipping instructions - Ganz Security CMC-25X | Manual - Page 2
service personnel under the following conditions: a. When the power supply cord or plug is damaged. b. If liquid has been spilled or objects have fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions - Ganz Security CMC-25X | Manual - Page 3
of view. Tighten the side screws on the camera bracket with a small Phillips head screwdriver (PH0 or smaller). 8. Refer to the camera manual provided to adjust camera settings by accessing the OSD menu. 9. The camera faceplate provided includes a tinted viewing window. In low light conditions, it
-
1 -
2 -
3
 |
 |
Page
1
of
3
INSTALLATION MANUAL
–
CMC Series Corner Mount Cameras
WARNING:
Before beginning installation of this product, carefully review the safeguards and
precautions found on page 2 of this manual.
Unpacking
Unpack carefully.
This is electromechanical
equipment and should be handled with care.
If an
item appears to have been damaged in shipment,
replace it properly in its carton and notify the shipper.
If any items are missing, notify CBC (America) Corp.
The shipping carton is the safest container in which
the unit may be transported.
Save it for possible
future use.
Service
If the unit ever needs repair service, the customer
should contact CBC (America) Corp. for a return
materials authorization (RMA) and shipping
instructions.
Care and Maintenance
Perform routine maintenance to keep the unit dust
free.
Clean the viewing window as needed with a
damp, soft cloth.
Model Designation
CMC-25X
Corner Mount Camera
Description
This camera can be mounted in any 90-degree corner
at any height desired.
The unit includes four conduit
knockout holes to accommodate many installation
locations.
The camera bracket can be adjusted to
attached the desired viewing angle.
Hardware Kit
2 x #10 Screws
2 x Plastic Drywall Anchors
Tools Required
Small adjustable wrench
Small Phillips head screwdriver (PH0 or smaller)
1/4” Drill Bit
5/32” Drill Bit
Certification
Installation should be performed by a licensed
professional and conform to the National Electrical
Code (NEC) and any applicable local codes.
Installation
1.
The camera can be mounted securely in any 90-
degree corner at any height desired.
Before
mounting the camera, determine the approximate
position and location required.
Select the
appropriate fasteners for the type of mounting
surface.
Also consider the cable entry path for
power and video cables to the camera’s location.
2.
The camera provides four (4) mounting holes,
two (2) on the top, and two (2) on the sides.
It
is recommended to use, at minimum, either the
two top or the two side mounting points.
Two
(2) #10 fasteners with drywall anchors are
provided in the hardware kit.
For other mounting
surfaces, verify the fastener type used will
provide the strength required for the installation.
3.
The camera provides four (4) conduit knockouts,
two (2) on the top and two (2) on the sides.
After the cable path is determined, select the
appropriate knockout to use.
Remove the
camera faceplate by removing the two visible
screws (front of camera).
With the faceplate off,
carefully remove the selected knockout for cable
entry into the camera.
---------- Instructions continue on Page 3-----------