Ganz Security N8LWM-2TB NR4HLNR8HL User Manual

Ganz Security N8LWM-2TB Manual

Get Ganz Security N8LWM-2TB PDF manuals and user guides View all Ganz Security N8LWM-2TB manuals
Add to My Manuals
Save this manual to your list of manuals

Ganz Security N8LWM-2TB manual content summary:

  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 1
    1
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 2
    CONTENT OVERVIEW 3 Before Installation 4 Key Features 6  Front Panel 7 Rear Panel 8 Remote Control At a Glance PLAY 62 If you want to play INSTALLATION 10 Basic Layout 11 Connecting to an external devices ARCHIVING 65 To start the Archive menu MONITORING 18 Start up/
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 3
    to the product should be properly earth-grounded. In operation mode Comply with the following instructions to prevent a fire, explosion, system failure or electric — If you need to open the cover, consult with a service person who could help you do what you want to do. — Do not connect multiple
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 4
    (HDD S.M.A.R.T, temperature, network connection status,fan error, etc.) — Dual streaming supported for a remote display — Auto resolution & FPS adjustment for a remote service — External eSATA HDD supported - various search methods (time, event, bookmark and thumbnail) — Mass storage backup
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 5
    What's included OVERVIEW Mouse  Remote Control x1 & Batteries (AAA x2) Power Cable x2 DC 12V Adaptor DC 48V Adaptor Screws Adapter cable retainer clip x2 User manual CD Quick Guide ᧱
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 6
    OVERVIEW Front Panel Name IR Remote Control Receiver USB Status LED Description Receive the signal from the remote control Used for connecting USB storage or mouse. Show the status of power,recording or network connection together with the corresponding alarm. ᧲
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 7
    AUDIO OUT Port for speaker connection. 11 eSATA Connection port for external SATA storage. 12 HD MONITOR Port for connecting a full HD(1920x1080) supported monitor. Use the HDMI cable to connect with a 1080p 60Hz monitor. 13 LAN(DOWNLINK) Port for connecting the dedicated network device. (Do
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 8
    OVERVIEW Remote Control At a Glance POWER Turn on or off the power. SEARCH Display the search window. ARCHIVE Display the backup window. Channel Function as channel selection button in live or playback mode. Or used for entering the password. DISPLAY Switch the split mode. SEQ Switch to sequence
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 9
    OVERVIEW Change the remote control ID The remote control will be active only if the remote control ID matches with that specified on the NVR. If multiple NVRs are installed on one place and you have just a single remote control, use the ID button to set the remote control ID. Only the ID-matching
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 10
    Storage Control Device POS ATM Precautions Access Controller To secure recording stability from an overloaded network traffic , hacking attempt or DoS (Denial of Service) attack, only the direct cable connection between camera and NVR is allowed. Any access from an outside PC to the IP camera
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 11
    INSTALLATION Connecting to an external device Connecting to the monitor This product supports only monitor models featuring 1080p 60Hz HDMI or DVI input. Connect the HDMI cable between HDMI output port in the bottom rear panel and HDMI
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 12
    overloaded network traffic , hacking attempt or DoS (Denial of Service) attack, only the direct cable connection between camera and NVR you can make alarm or audio connection. For more details, refer to the user manual of the IP camera. — The Ethernet connection is effective within 100 meter in
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 13
    Alarm I/O Connection INSTALLATION connect the alarm input signal 1. While pressing and holding the [A1] or [A2] port button in the rear bottom of the NVR, insert the alarm signal cable in the hole under the button. 2. Insert the grounding wire in the [GND] port. 3. To ensure secure connection,
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 14
    GND] of the keyboard controller. 9 For RS-485 connection, refer to the user manual of the keyboard controller. 9 Signal connection for POS and ATM is scheduled to be or ATM. For connection of the text-in device, refer to the user manual of the text-in device. 9 Signal connection for POS and ATM is
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 15
    INSTALLATION eSATA Storage If the internal storage space is insufficient, you can extend your storage capacity by adding an eSATA storage device to the rear eSATA port.  9 Recording may not be enabled with an incompliant eSATA storage. For the compatibility list, contact the retailer of the eSATA
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 16
    bar (web browser) of the local PC or of the dedicated software program in the format of ಯhttp://IP address:web service port ರ.(Ex : http://192.168. 1.23:8080) The web service port is set to 8080 by default. From the Network Setup screen, you can change the port number. 4. Provide the
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 17
    INSTALLATION PC connection from a remote network You can connect NVR to a PC or mobile device in the same remote network and control or manipulate it on the monitor of the PC or mobile device Broadband Router Direct Connection Local PC Local PC ADSL Modem Remote PC Smart Phone 1. Connect the [
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 18
    Monitoring Start Up/ Shutdown START You can connect NVR to a PC in the same network and control or manipulate it on the PC monitor. 1. Connect the adaptor to the 48V PoE power input port in the rear panel of NVR. 9 Make connection when the power is not applied yet. 2. Connect the adaptor to the 12V
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 19
    Monitoring System Shutdown You can connect NVR to a PC or mobile device in the same remote network and control or manipulate it on the monitor of the PC or mobile device 1. In the monitoring screen, click in the bottom left corner of the screen to the system, or press the [POWER]
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 20
    Monitoring Live Screen At a Glance The live screen largely consists of three components: video window, status bar and timeline zone. Video Window Quick Menu Timeline Status Bar Video Window Icons used in the video window. ITEM Description Camera ID Show the camera ID Displayed if an event
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 21
    -compliant camera on the PTZ screen. Move to the Digital Zoom. Display the log list of the recent recording events. You can use the camera supporting the audio input to listen to the audio. Select a camera to which the audio signal will be transferred from the connected microphone. Start the panic
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 22
    the number of the current channel. Start playing the video of the selected channel from the specified time. Zoom the video of the selected channel. (Supported later) Turn on or off the audio signal of the selected channel. Turn on or off the microphone signal of the selected channel ᧮᧮
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 23
    mode from 1, 4, 9, 6 and 8 split screen. Or press the [DISPLAY] button on the remote control until a desired split mode is displayed. 9 4CH NVR model support only 1- and 4-split screen modes. Auto sequence Click the Sequence button in the status bar, or press the [SEQ] button on the remote control
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 24
    Monitoring To check the event log You can check the log of the events that occurred. 1. Click Log to display the "EVENT LOG" window. The log list is sorted with the latest one on top. 2. Double-click a desired log to display the event video. You will move to the play screen of the selected log. To
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 25
    ". (page 38). Monitoring To check the disk status You can check the storage space of the current disk and check also if there is any problem with the disk. Click to close the window. For more information, refer to "Disk Information". (page 43). ᧮᧱
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 26
    System Setting To move to the System Setup menu How to use the mouse How to use the remote control 1 How to use the remote control 2 . ᧮᧲
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 27
    System Setting Camera Setting You can configure the camera settings on the NVR screen regarding the camera ID, image, hide/show, and motion. CAMERA ID You can change the camera ID that is displayed on the screen. 1. From - , select . 2. Use the [ʆʈُٙ/ENTER]
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 28
    System Setting 3. Click and configure the display settings in detail for each camera as necessary. 9 The advanced setting items may differ depending on the camera model. 4. To apply the change, click in the bottom of the screen. 5. When done, press the [EXIT] button on the remote
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 29
    System Setting > SENSITIVITY : Set the sensitivity level of the motion sensor to either Daytime or Nighttime. > MINIMUM BLOCKS : Set the minimum number of blocks (that will be considered an event) to Daytime or Night if a motion is detected in several blocks in the motion sensor area. > AREA SETUP :
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 30
    System Setting Display Setting You can configure the display settings regarding the OSD menus, monitor and sequence. OSD Configure the settings for the time, title, boundary, icon and language that will be displayed on the screen. 1. From - , select . 2. Use the [ʆʈُٙ/
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 31
     System Setting Monitor If you change from monitoring mode to sequence, you will have to set the interval of the sequence. 1. From - , select . 2. Use the [ʆʈُٙ/ENTER] buttons on the remote control or use the mouse to set a sequence interval for auto mode to
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 32
    System Setting 6. If the selected split mode is CONFIRMATION displayed on , select a channel you want to display in each split screen. 7. Click . The set sequence mode is confirmed and will be added to the Add Sequence list in order 8. When done, click in the bottom of the screen.
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 33
     System Setting Audio Setup You can configure the settings of the voice and audio signal. AUDIO Choose whether to receive the live sound source and select an audio channel. 1. From - , select . 2. Use the [ʆʈُٙ/ENTER] buttons on the remote control or use the mouse to
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 34
    System Setting User Setting You can configure the settings regarding user management and user and group permissions. Management You can add a user account(s) that can be edited at a later time. 1. From - , select . 2. Use the [ʆʈُٙ/ENTER] buttons on the remote
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 35
     To edit the user account information 1. From the list of users, select a user account to edit and click next to it. 2. From the Edit window, make necessary changes and click . 3. To delete the user account, click . The account can not be changed or edited. . 
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 36
    . >2ST DNS SERVER : Enter the address of the primary DNS server. >RTSP SERVICE PORT : port number that the remote client receives the NVR video from. >WEB enabled. If the router does not support the uPnP protocol, you must set the port forwarding manually. For more information, contact your network
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 37
    are connected to the network can access remotely DDNS is an IP redirection service in a dynamic IP environment that redirects (maps) the new IP is set to , the email will be transferred to a server that does not support SSL. >USER : Provide the email account (ID) of the sender. >PASSWORD :
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 38
    IP address for the internet, accessible from the NVR. The NVR can be granted access with the web browser at http://:. The IP address can vary in a dynamic IP environment. >CONNECTED CLIENTS :Shows the list of clients that are currently connected. Press < > to
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 39
    the mouse to change the time or set the options as necessary. >DATE/TIME : Set the current time and date. Click< > to adjust the time manually. >DATE FORMAT : specify the date format. >TIME FORMAT : specify the time format. >TIME SERVER : obtain the current time from the time server. Click < > to
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 40
    System Setting System Management You can check, update or reset the system information. 1. From - , select . 2. Use the [ʆʈُٙ/ENTER] buttons on the remote control or use the mouse to set each option of the system management. FW UPDATE : you can
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 41
     To perform the upgrade 1. Connect the USB storage device that contains the updatable files. 2. Click . 3. Select one(s) from the updatable files LIST listed in .  4. Click . 5. When the confirmation message appears, click .  6. The progress bar displays the progress of
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 42
    System Setting System Information You can check the current system version and system-related settings. 1. From - , select . 2. Check the status of the current system. 3. When done, press the [EXIT] button on the remote control or click in the lower
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 43
    the disk or the connection cables of the disk. If you leave the problem unresolved, no recording may be enabled. So it is recommended that you replace . The disk should be replaced immediately. Contact the retailer or the customer service to replace the disk. 3. When done, press the [EXIT] button
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 44
    so that you need to check the disk or the connection cables of the disk. If you leave the problem unresolved, no recording may be enabled. So it is recommended that you replace the disk immediately. - ERROR replaced immediately. Contact the retailer or the customer service to replace the disk. ᧰᧰
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 45
    System Setting 9 S.M.A.R.T CHECK INTERVAL : Specify the S.M.A.R.T check interval. Click to start checking. 3. To apply the change, click in the bottom of the screen. 4. When done, press the [EXIT] button on the remote control or click in the lower screen. The confirmation
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 46
    System Setting ON/OFF Schedule You can activate or turn off the alarm output as scheduled. 1. Use the [ʆʈُٙ/ENTER] buttons on the remote control or use the mouse to select a for the schedule. 2. Drag the mouse to resize the cell or use the on the [ʆʈُٙ] buttons to move to the cell, then press
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 47
    Buzzer output You can notify the user of the event using the buzzer. >DURATION - TRANSPARENT : Keep the buzzer out for as much time as the event lasts. - UNTIL KEY : Keep the buzzer out until a mouse or remote control button is pressed. - 5 ~ 300 SEC : Keep the buzzer out for as long as specified.
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 48
    after. Some email servers can block the email sending if the email delivery cycle is too short, and classify it as spam. Contact your email service provider to adjust the minimum delivery cycle so that the server does not classify the email as spam. Alarm Sensor You can configure the settings
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 49
    System Setting Motion Sensor You can set an action to execute when a motion is detected.For the settings of the motion sensor, move to . 1. From - , select . 2. Use the [ʆʈُٙ] buttons on the remote control or use the mouse to specify the ignorance
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 50
    if the disk causes the S.M.A.R.T error. >NO DISK EVENT : Occurs if no disk is recognized after the booting due to a disk failure or cable problem. To detect the disk error, it is recommended not to change the settings of the S.M.A.R.T event, no disk event and buzzer output. Record >PANIC RECORD
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 51
    good ventilation. - If the problem persists, contact the retailer or service center. To monitor the normal operation of the NVR, it is recommended not to change the buzzer output settings of the fan failure event and the temperature fail event. Network >TROUBLE
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 52
    menu How to use the mouse How to use the remote control 1 Record Setup Operation Mode You can set the recording options for Auto or Manual mode. 1. From menu, select . 2. Use the [ʆʈُٙ] buttons or use the mouse to set to or
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 53
    if an alarm event occurs or a motion is detected. Manual Configuration If you set the record mode to , the manual configuration window will appear where youcan set the manual recording and panic recording options. >MANUAL CONFIGURATION OPTIONS : You can configure the recording
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 54
    Quality Setting 1. Please select the day of the week to perform the continuous recording. From , you must set the of the to before you can specify the. 2. Click a time cell from which you want to edit the SIZE/FPS/Quality and drag
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 55
    Record Setting Schedule Setting 1. Select a start day of the week on the schedule. 2. Click a time cell from which you want to make the schedule and drag it to a desired cell. Or use the [ʆʈُٙ] buttons on the remote control to move to the cell and press [ENTER]. Then, use the [ʆʈُٙ] buttons to move
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 56
    Record Setting Alarm Recording Specify the recording size of the alarm event if it occurs and make schedule for that recording. 1. From the menu, select . 2. Use the [ʆʈُٙ] buttons on the remote control or use the mouse to select either or .
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 57
    Record Setting Network Streaming You can specify the maximum size of network streaming for remote users and set the FPS. Even if you set the resolution and FPS to high for the network streaming, the NVR will reduce the size or FPS according to the network status (speed) before transferring the
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 58
    Search You can configure the record settings for the NVR. Only authorized users can access the Record Setup menu. To move to the Search menu while in monitoring How to use the mouse How to use the remote control 1 How to use the remote control 2 To move to the Search menu while in playback mode How
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 59
    event recording is performed on the recording data. >Blue (Motion) : The motion event recording is performed on the recording data. >Yellow (Panic) : The panic manual recording is performed on the recording data. 4. Click to move to a desired start time in the time bar, or use the buttons at the
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 60
    Search Thumbnail Search To improve your search, you will be provided with a list of thumbnails. Select Day, Hour or Minute to narrow down the search results. 1. From the menu, select . 2. Use the [ʆʈُٙ] buttons or use the mouse to specify the search date and time from
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 61
    Search Event Search Search for events that occurred at the specified time and select an event to play from the list. 1. From the menu, select . 2. Use the [ʆʈُٙ] buttons or use the mouse to specify the and times in the left of the event search list. 3. Select a
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 62
    PLAY If you want to play 1. To play the searched data - You can search for and play a searched data. 2. To play with the live viewer - Simply double-click a desired time point in the right corner of the play screen. 9 If you move the cursor to the rightmost, the "Timeline" bar will be displayed. -
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 63
    (The zooming function is active only in '1'split screen.. The "Set bookmark" popup appears, and you can bookmark a play point for the backup purpose (Supported later) Using the play bar ITEM Jump Description Move forward or backward. Reverse Fast Play Reverse Play Pause Play Fast Forward Zoom In
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 64
    PLAY Bookmarking During playback, you can add a bookmark for reserving the video data. You can view the bookmarked data in the Archive menu, which can be saved to a connected device for the backup purpose. 1. Provide a tag in the item for data reservation. 2. Provide the details of the
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 65
    Archiving To start the Archive menu Using the Archive menu during playback 1. During the playback, click . 2. The "ARCHIVING SETUP" window appears where you can reserve the data. 3. Click in the lower left corner and select the menu. 4. Press the [ARCHIVE] button
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 66
    Archiving Reserved data management You can search for the reserved data and delete or import it to a storage device. 1. From the meun, select . The reserved data will be listed. 2. If you want to play the data, double-click a desired data item or click it and
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 67
    Archiving Archive Devices Setup Provide the FTP server information for archiving data in the HDD before testing the transfer. 1. From the < ARCHIVE > menu, select 2. Move to the FTP information box. 3. Fill in each item using a virtual keyboard. 9 HOST NAME : enter the
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 68
    address and web service port in the address bar of the browser. Ex) http://001CB8123456.DVRLINK.NET:8080 z In a router network, you have to set the "Port Forwarding" and "DMZ Setting" to allow access from outside. z For the necessary settings of the router, refer to the user manual of the router
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 69
    1. Provide the user ID and password. 9 The default User name : ADMIN; the default password is 1234. Web Viewer 2. Click the upper warning bar to install the ActiveX. 9 If you fail to download the ActiveX control, move to Tools Î Internet OptionsÎSecurityÎ Custom Level ÎDownload unsigned ActiveX
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 70
    Web Viewer Live Live Screen At a Glance Item 1.View selection tab 2.Live 3.Split Mode 4. Sequence 5.Status Log Refresh Time Reload 6.Voice transmission 7. Channel 8. Save Print Capture ActiveX Settings Description You can switch to the live, playback and setup screen and check the provided
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 71
    Switching the split mode Click the Switch button to switch the mode as follows: Web Viewer VSOLW0RGH!     VSOLW0RGH!        VSOLW0RGH!     VSOLW0RGH! ᧳᧭
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 72
    Web Viewer To save the video 1. Click < > to start saving. 2. The video from the selected channel will be saved to the PC in the AVI format. (Default path: C:\SaveFolder) Click < > again to stop saving. Click to display the context menu where you can change the saving path. Print
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 73
    Status tab Click at the bottom of the screen. You can check the event occurrence for each channel of the connected NVR. Log tab Click at the bottom of the screen. You can check the log of the connected NVR.. Web Viewer PTZg tab Click at the bottom of the screen. You can
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 74
    Web Viewer Search Click to display the remote control screen for the NVR.. Search Viewer at a Glance  Item 1.View selection tab 2.Playback Screen 3.Split Mode 4.Sequence 5.Play button bar 6.Time Selection 7.Time Line 8.REFRESH PLAY Backup 9.Channel Selection 10.Screen Image Capture
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 75
    Web Viewer Search by time Use the timeline to search for the data recorded in the NVR. 1. Select a date that you want to search. 2. Click . 3. Check the existence of recording data in the bottomtime line and specify the time range for your search. You can specify the start time by moving
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 76
    Web Viewer Setup Click to display the remote control screen for the NVR. When done, click to apply the changes to the remotely connected NVR. 9 If the NVR is in process of system or record setting, the remote control will be disabled. If you change the settings remotely at will, the
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 77
    Motion Setting Specify the use of motion detection and reaction For each channel and set also the daytime/nighttime options. Select a channel. Set the mask area and activation and specify the daytime range. When done, click to apply the changes. 9 For information about how to set the motion
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 78
    Web Viewer Audio Audio/Buzzer You can configure the settings of the voice and audio signal. 9 For details about each displayed item, refer to "Audio Setup".(page 33) User User Management You can add a user account and change the password. 9 For details about each displayed item, 9 refer to "User
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 79
    Network Network Setting You can check the network connection status and change the baud rate. Change the maximum transfer rate and click to apply it. 9 For more information about each network entry, refer to "IP Setup". (page 37) DDNS Setting You can configure the DDNS settings so that remote
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 80
    Web Viewer System Date/Time Setting Specify the current date and time. When done, click to apply the changes.. 9 For For more information about each of the time and date settings, refer to "Date/Time". (page 39)  System Management You can configure the access settings of: log in, log out, and
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 81
    Storage Device Information You can check a list of internal/external storage devices connected to the NVR as well as the recording time information of each device.  S.M.A.R.T Status You can check the S.M.A.R.T status for each of the internal and external devices. 9 What is S.M.A.R.T? This is a sort
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 82
    Web Viewer Sensor Alarm Output Specify the alarm output conditions with the work schedule.. When done, click to apply the changes.. 9 For more information about the alarm output and ON/OFF schedule, refer to "Alarm Out". (page 45) Event Notification Specify the notification method using one of
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 83
    Alarm Sensor You can configure the settings of the alarm sensor And specify the operation of the sensor if an event occurs. When done, click to apply the changes. 9 For more information about each of the alarm sensor actions, refer to "Alarm Sensor". (page 48) Motion Sensor You can set an
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 84
    Web Viewer System Event You can set which action to perform if an event related to the disk, recording, network or system happens. You may want to notify the user of the event usingthe alarm output, buzzer, OSD popup and email. When done, click to apply the changes. 9 For more information about
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 85
    Record Setup Record Setting You can set the recording options for Auto or Manual mode When done, click to apply the changes. 9 For more information about how to set each mode, refer to "Operation Mode". (page 54) Continuous
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 86
    Web Viewer Motion Recording Set the and the to apply if a motion event occurs. Click < > next to each item to display the list of valuesavailable.  Complete setting the forthe motion recording as well as the , and click
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 87
    < > next to each item to display the list of values available. When you have completed the manual record settings, click to apply the changes. 9 For more information about the manual record settings,refer to "Panic Recording". (page 57) Network Streaming You can specify the maximum size of
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 88
    Mobile Viewer GanzView You can use the smart viewer to monitor the network on a remote site and play the monitoring video anytime anywhere. GanzView specification Minimum/ recommended specification OS Minimum specification Android Phone Processor :800 MHz or higher Flash : 512 MB or higher
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 89
    iPhone, access the App Store. Enter "GanzView" in the search bar to find it before downloading. Install the application on your iPhone. The GanzView supports the 1/4 split screen mode. 9 With the GanzView Lite, you cannot: check the log, control the PTZ operations or change the system settings. To
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 90
    Mobile Viewer 5. Provide the access ID of the DVR as well as the password. 6. Specify the use of the Auto Login. 7. Click . 8. Select the site that you added in the DVR List. 9. Try to access the DVR. If connected successfully, you will see the screen as shown. ᧵᧬
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 91
    Split Mode 1. Click any area on the screen. The main menu appears at the bottom of the screen.  2. Click < > in the top left corner to switch to 1-split mode; click < > to switch to 4-split mode. 9 Use the mouse to scroll the screen to the left or right to move to the next camera video screen.
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 92
    Mobile Viewer Using the Log View 1. From the main menu, click < >. You can check the log of the data stored. 2. Select one from Alarm, Motion, Record, Etc. and click < >. You will view the log of related items. ᧵᧮
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 93
     Using the Search function 1. From the main menu, click < >. You can view the history of the data stored. 2. Select a desired time and date. You can use the vertical time bar to specify the start time. 3. Click < > to play the video recorded at the specified time. Mobile Viewer 4. Click any area
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 94
    Mobile Viewer Using the Setup function From the main menu, click < >. You will be connected to the web viewer site. 9 For details about each displayed item, refer to "Setup".(page 77) ᧵᧰
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 95
    phone, access the Market. Enter "GanzView" in the search bar to find it before downloading. Install the application on your Smart Phone. 9 The GanzView supports the 1/4 split screen mode. With the GanzView Lite, you cannot: check the log, control the PTZ operations or change the system settings. To
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 96
    Mobile Viewer 8. Select the site that you added in the DVR List. Press and hold the mouse button to display the pop-up window. 9. Select and try to access. If connected successfully, you will see the screen as shown. Split Mode 1. Click any area on the screen. The main menu appears at the
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 97
    2. Click < > in the top left corner to switch to 1-split mode; click < > to switch to 4-split mode. 9 Use the mouse to scroll the screen to the left or right to move to the next camera video screen. Using the Log View 1. From the main menu, click < >. You can check the log of the data stored. 2.
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 98
    Mobile Viewer Using the Search function 1. From the main menu, click < >. You can view the video of the recording data. 2. Select a desired time and date. You can use the vertical time bar to specify the start time. 3. Click < > to play the video recorded at the specified time. 4. Click any area to
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 99
    Archive Viewer You can play the data archived in the NVR. You can play the HDD data recorded by the NVR. Getting started with the Backup Player 1. Connect the NVR to the backup USB storage device. 2. Open the folder saving the archived images. 3. Run the Backup Player. 4. Click < > in the bottom
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 100
    Archive Viewer Backup Player At a Glance   Item 1.Setup Minimize, Close 2.Channel Information 3.Play Time 4.Play Time 5.File Search Capture Print 6.Playback Control 7.Split Mode 8.Audio Setting 9.Play Bar Description Configure the environment settings. Minimize or close the Backup Player. Show
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 101
    Video Capture Click < > to capture the current video image. 9 Selected Video : Capture the actual frame of the current video. 9 Screen : Capture the visible portion of the current video. 9 Format : Select a saving format. 9 (BMP, JPG, PNG) 9 Path : Specify the saving path. Default location : My
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 102
    Archive Viewer Settings Click < > to configure the Backup Player settings. You can check the version of the Backup Player. 9 Maintain image aspect ratio : Preserve the aspect ratio of the image. If you do not mark this option, the image will be adjusted to fit the screen.  9 About : You can check
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 103
    Appendix \ Specification Item VIDEO INPUT VIDEO # OF CHANNELs MAIN MONITOR MAINMONITOR RESOLUTION MOTION DETECTION AUDIO INPUT AUDIO OUTPUT AUDIO CODEC RECORDING CODEC REC.RATE REC.RESOLUTION ALRM I/O ALARM INPUT ALARM OUTPUT STORAGE INTERNAL HDD (SATA) EXTERNAL STORAGE INTERFACES USB(USB2.0) RS-
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 104
    ᧭᧬᧰
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 105
      ᧭᧬᧱
  • Ganz Security N8LWM-2TB | NR4HLNR8HL User Manual - Page 106
     ᧭᧬᧲
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
1