Ganz Security PT127N-XT Manual
Ganz Security PT127N-XT Manual
 |
View all Ganz Security PT127N-XT manuals
Add to My Manuals
Save this manual to your list of manuals |
Ganz Security PT127N-XT manual content summary:
- Ganz Security PT127N-XT | Manual - Page 1
PT127N-XT Outdoor Vandal Proof 27x DN PTZ Dome User Manual U NY: 55 Mall Drive • Commack, NY 11725 (800) 422-6707 CA: 20521 Earl Street • Torrance, CA 90503 (800) 888-0131 www.computarganz.com - Ganz Security PT127N-XT | Manual - Page 2
intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This Device compiles with Part 15 of , including G interference that may cause undesired operations. GSpeed Dome Camera Instruction Manual 2/48 - Ganz Security PT127N-XT | Manual - Page 3
Guide NOTICE 1. Read, heed and follow all the Instructions Read all the safety and operating instructions before using the product. 2. Keep this manual Keep this manual and conform to all the instructions by the manufacturer. z Refer all servicing to qualified service personnel. z Unless the - Ganz Security PT127N-XT | Manual - Page 4
where there are strong magnetic fields and electric signals. z Avoid installing in places where the product would be subject to strong vibrations. GSpeed Dome Camera Instruction Manual 4/48 - Ganz Security PT127N-XT | Manual - Page 5
Menu 20 Reserved Preset (Hot Keys) 20 Preset 21 Swing 21 Pattern 22 Group 23 Other Functions 23 OSD Display 25 ྜ OSD Menu Quick Programming Guide 26 Main Menu 26 Display Setup 27 Privacy Zone Mask Setup 28 Camera Setup 30 Motion Setup 34 Preset Setup 37 Swing Setup 39 - Ganz Security PT127N-XT | Manual - Page 6
Privacy Mask z SNR (Super Noise Reduction) Function z Various Focus Mode : Auto-Focus, Manual Focus, Semi-Auto Focus z Various Setup Options in OSD Menu. ‰ Powerful Pan/Tilt Reserved for OSD Menu Preset 128 Case K Case 9 "TERRACE" GSpeed Dome Camera Instruction Manual 6/48 - Ganz Security PT127N-XT | Manual - Page 7
easily and directly with the reserved presets (Hot Keys), without entering into OSD menu. For more information, refer to "Reserved Presets(Hot Keys)" in this manual. GSpeed Dome Camera Instruction Manual 7/48 - Ganz Security PT127N-XT | Manual - Page 8
such as LAN, ADSL/VDSL, and Wireless LAN. For more information, refer to the separated manual for IP Addressable models. ‰ Perfect Outdoor Environment Compatibility and Easy Installation z The fans and heaters z It is easy to install and repair the camera. GSpeed Dome Camera Instruction Manual 8/48 - Ganz Security PT127N-XT | Manual - Page 9
Cable,Wrench] z Accessories for The Models with Alarm In/Out Function [I/O Cable] ‰ Brackets z Wall Mount Bracket [Screws : Machine M5u15, Hex Lag #14u50] GSpeed Dome Camera Instruction Manual 9/48 - Ganz Security PT127N-XT | Manual - Page 10
network configurations to the factory default. (IP addressable models only) Press the button for more than 5 seconds to initialize the network system. GSpeed Dome Camera Instruction Manual 10/48 - Ganz Security PT127N-XT | Manual - Page 11
on off off off 19 on on off Off on off off off 20 off off on off on off off off GSpeed Dome Camera Instruction Manual 11/48 - Ganz Security PT127N-XT | Manual - Page 12
DIP S/W, the change will be effective after you reboot the camera. z The factory default protocol is "Pelco-D, 2400 bps". ‰ Terminal Resistor Setup GSpeed Dome Camera Instruction Manual 12/48 - Ganz Security PT127N-XT | Manual - Page 13
in cable length from the controller. Do not turn on the terminal resistor of all the cameras on the same communication cable. G GSpeed Dome Camera Instruction Manual 13/48 - Ganz Security PT127N-XT | Manual - Page 14
vinyl from dome cover. Important Notice z Before starting the installation, make sure that the Camera ID and Protocol are set up properly. GSpeed Dome Camera Instruction Manual 14/48 - Ganz Security PT127N-XT | Manual - Page 15
Cable Port Pin Number (RJ25) 1 2 3 4 5 6 Connector / Wire Color BNC Connector Red Yellow Orange White Wire Color Blue Yellow Green Red Black White GSpeed Dome Camera Instruction Manual Signal Video + Video RS-485 + RS-485 Power + Power Signal IN COM + IN 1 IN 2 IN 3 OUT A OUT B 15/48 - Ganz Security PT127N-XT | Manual - Page 16
cable between a controller and the camera(s) on the same communication line must be less than 1.2Km.G G ‰ Video z Use BNC coaxial cable only. GSpeed Dome Camera Instruction Manual 16/48 - Ganz Security PT127N-XT | Manual - Page 17
shown in the above circuit. IN1-,IN2 -,IN3 - Connect the outputs of sensors to each port as shown in the above circuit. GSpeed Dome Camera Instruction Manual 17/48 - Ganz Security PT127N-XT | Manual - Page 18
The maximum loads are as follows. Power Type DC Power Maximum Load MAX. DC 24V, 1A AC Power MAX. AC 125V, 0.5A GSpeed Dome Camera Instruction Manual 18/48 - Ganz Security PT127N-XT | Manual - Page 19
can be checked by reading the DIP switch of the camera or on OSD. z If your controller supports multi-protocols, the protocol must be changed to match to that of the camera. z Adjust the information, refer to "Reserved Presets(Hot Keys)" in this manual. GSpeed Dome Camera Instruction Manual 19/48 - Ganz Security PT127N-XT | Manual - Page 20
ON Go Preset [174] : Setting Camera Focus Mode to AUTO Go Preset [175] : Setting Camera Focus Mode to Manual Go Preset [176] : Setting Camera Focus Mode to SEMI-AUTO Go Preset [177] : Setting Day & Night : Setting all Privacy Mask Display to ON GSpeed Dome Camera Instruction Manual 20/48 - Ganz Security PT127N-XT | Manual - Page 21
3 : [13] Method 2) [Swing NO. + 140] ex) Run Swing 3 : [143] To delete Swings, enter into OSD menu. GSpeed Dome Camera Instruction Manual 21/48 - Ganz Security PT127N-XT | Manual - Page 22
/Zoom. Hence there might be small differences between the original path and the revived path by path type of Patterns. Note that it is not a problem in position precision. GSpeed Dome Camera Instruction Manual 22/48 - Ganz Security PT127N-XT | Manual - Page 23
wait for from the previous-last (most recent) command before running the pre-defined action. It can be set to 1 second ~ 3 hours. G GSpeed Dome Camera Instruction Manual 23/48 - Ganz Security PT127N-XT | Manual - Page 24
mode. z Semi-Auto Focus This mode automatically exchanges focus modes between Manual Focus mode and Auto Focus mode by operation. Manual Focus mode activates in preset operation and Auto Focus mode activates during Focus mode when jog operation starts. GSpeed Dome Camera Instruction Manual 24/48 - Ganz Security PT127N-XT | Manual - Page 25
OFF state will be displayed. Example) The point 2 & 3 of inputs are ON and Output is ON, OSD will show as below. I:-23 O:1 GSpeed Dome Camera Instruction Manual 25/48 - Ganz Security PT127N-XT | Manual - Page 26
G Quick Programming Guide OSD MENU 4 z The menu items with < > always have sub-menus. z To go to submenus or make the cursor move to the functions of the camera. Initializes all system configurations and all data to the factory default parameters. GSpeed Dome Camera Instruction Manual 26/48 - Ganz Security PT127N-XT | Manual - Page 27
ID ON PTZ INFORMATION AUTO ACTION TITLE AUTO PRESET LABEL AUTO ALARM I/O AUTO BACK EXIT GSpeed Dome Camera Instruction Manual OSD MENU 4 Display setup allows you to program how labels are displayed on the monitor. In case of AUTO, the labels are - Ganz Security PT127N-XT | Manual - Page 28
selected mask number shows or not on the screen. z Clear Mask [CANCEL/OK] Deletes the mask data of the selected mask number. G GSpeed Dome Camera Instruction Manual 28/48 - Ganz Security PT127N-XT | Manual - Page 29
the arrow buttons of your controller to adjust mask size. z (Left/Right) Adjusts the mask width. z (Up/Down) Adjusts the mask height. G GSpeed Dome Camera Instruction Manual 29/48 - Ganz Security PT127N-XT | Manual - Page 30
mode activates in preset operation and Auto Focus mode activates during jog operation. With Manual mode at presets, Focus data is memorized in each preset in advance and the proper images. z Sharpness [0-32] Sets image sharpness to enhance pictures. G GSpeed Dome Camera Instruction Manual 30/48 - Ganz Security PT127N-XT | Manual - Page 31
/Gain moving z WB Mode z Red Adjust z Blue Adjust [AUTO/MANUAL] Retains color balance over a color temperature range. In auto mode, this feature automatically processes the viewed image. In Manual mode, Red and Blue level can be set up manually. [0-255] Adjusts the picture output in the - Ganz Security PT127N-XT | Manual - Page 32
Shutter Speed and Gain are adjusted automatically in correspondence with each numeric value. [AUTO/MANUAL(F1.6~F28)] Sets Iris to operate automatically or at a user-defined level. conditions. If Iris is set to Manual, Iris is fixed and Iris has lower priority in adjusting AE, in comparison - Ganz Security PT127N-XT | Manual - Page 33
Speed should be set to 1/100 sec. for NTSC and 1/120 for PAL. [OFF/LOW/MIDDLE/HIGH/MANUAL(5~41dB)] Sets AGC. This setting enhances image brightness automatically in case that luminance level of image signal is too on another by Slow Shutter function. GSpeed Dome Camera Instruction Manual 33/48 - Ganz Security PT127N-XT | Manual - Page 34
. This feature also reduces bandwidth when working with digital systems or digital network systems. This function availability should be different by models. GSpeed Dome Camera Instruction Manual 34/48 - Ganz Security PT127N-XT | Manual - Page 35
the system boots. If Park Action is set to PREV. ACTION, the camera runs the previous action which it ran most recently. GSpeed Dome Camera Instruction Manual 35/48 - Ganz Security PT127N-XT | Manual - Page 36
HOLD TIME passes. If Post Action is set to PREV. ACTION, the camera runs the previous action which it ran most recently. GSpeed Dome Camera Instruction Manual 36/48 - Ganz Security PT127N-XT | Manual - Page 37
PRESET NO. 1 CLR PRESET RELAY OUT CAM ADJUST CANCEL LABEL123 OFF GLOBAL BACK EXIT GSpeed Dome Camera Instruction Manual OSD MENU 4 z Preset Number z Clear Preset z Edit Preset Scene z Edit Preset Label z Relay Out z CAM Adjust G [1~128] Selects a preset number to - Ganz Security PT127N-XT | Manual - Page 38
LABEL - PRESET 1G G [ ]G ----------G 1234567890 OKG ABCDEFGHIJ CANCELG KLMNOPQRSTG UVWXYZabcdG efghijklmnG opqrstuvwxG yz-/:.G ----------G GSpeed Dome Camera Instruction Manual OSD MENU 4 ഗ1 Use the Joystick to move the camera to a desired position. ഗ2 Save the preset position - Ganz Security PT127N-XT | Manual - Page 39
SWING NO. 1 1ST POS. NOT USED 2ND POS. NOT USED SWING SPEED CLEAR SWING RUN SWING 30/SEC CANCEL BACK EXIT GSpeed Dome Camera Instruction Manual OSD MENU 4 z Swing Number z 1st Position 2nd Position [1~8] Selects a Swing number to edit. If the selected Swing is not defined, "NOT USED" is - Ganz Security PT127N-XT | Manual - Page 40
screen. ཝGTo save the data and exit, press NEAR key. To cancel saving the data and delete the data, press FAR key.G GSpeed Dome Camera Instruction Manual 40/48 - Ganz Security PT127N-XT | Manual - Page 41
that MAX. 20 actions are allowed in a Group. Move the cursor up/down to select an Action. Press Near key to edit. GSpeed Dome Camera Instruction Manual 41/48 - Ganz Security PT127N-XT | Manual - Page 42
menu (Step ྚ). Move the cursor Up/Down to select an Action number and repeat Step ྚ ~ Step ྜ to keep editing the selected Groupډ G GSpeed Dome Camera Instruction Manual 42/48 - Ganz Security PT127N-XT | Manual - Page 43
G EDIT GROUP 1 NO ACTION ### DWELL OPT 1 PRESET 1 00:03 360 2 NONE 3 NONE 4 NONE 5 NONE SAVE CANCEL OSD MENU 4 འGAfter finishing setting up, press FAR key to exit. Then the cursor will move to "SAVE". Press Near key to save the data.G GSpeed Dome Camera Instruction Manual 43/48 - Ganz Security PT127N-XT | Manual - Page 44
AUTO Shutter ESC AGC MIDDLE SSNR MIDDLE SENS-UP AUTO z User-Defined Data Preset 1~128 Undefined Swing 1~8 Undefined Pattern 1~4 Undefined Group 1~8 Undefined GSpeed Dome Camera Instruction Manual 44/48 - Ganz Security PT127N-XT | Manual - Page 45
(ICR) Auto / Manual / SemiAuto Auto / Manual u256 ~ 1/120000 sec Low / Middle / High / Manual / Off Auto / Manual(Red, Blue Gain Adjustable. 1800qK~10500qK) BLC / Off Selectable Low / Middle / High / Off 8 Masks, Spherical Coordinate ON / OFF GSpeed Dome Camera Instruction Manual 45/48 - Ganz Security PT127N-XT | Manual - Page 46
Output, MAX. Load DC24V 1A / AC125V 0.5A Always ON Operation Start from Internal Temperature 10qC -30qC ~ 50qC AC24V RATED POWER AC 24V / 1.5 A GSpeed Dome Camera Instruction Manual 46/48 - Ganz Security PT127N-XT | Manual - Page 47
to change without prior notice. 2) Specification and features are different by models. 3) Check the voltage and current capacity of rated power carefully. GSpeed Dome Camera Instruction Manual 47/48 - Ganz Security PT127N-XT | Manual - Page 48
G Dimension z Main Body z Wall Mount Type SPECIFICATIONS 5 G GSpeed Dome Camera Instruction Manual [Unit : mm]G 48/48
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
P
P
T
T
1
1
2
2
7
7
N
N
-
-
X
X
T
T
Outdoor Vandal Proof 27x DN PTZ Dome
User Manual
NY: 55 Mall Drive • Commack, NY 11725 (800) 422-6707
CA: 20521 Earl Street • Torrance, CA 90503 (800) 888-0131
www.computarganz.com