Home » Ganz Security Manuals » Computer Monitors » Ganz Security ZM-L35T » Manual Viewer

Ganz Security ZM-L35T Manual

View all Ganz Security ZM-L35T manuals

Add to My Manuals
Save this manual to your list of manuals

Ganz Security ZM-L35T manual content summary:

Ganz Security ZM-L35T | Manual - Page 1
Thank you for purchasing this product. Please read the User's Manual before using the product. User's Manual is subject to change without notice. 3.5" LCD CCTV Test Monitor Accessories: Legend: 1. Carrying Case 2. Monitor Guard 3. Terminal Blocks 4. Battery Pack 5. AC Adapter 6. Meter Probes 7.
Ganz Security ZM-L35T | Manual - Page 2
function while in charging mode. 2. Please read all details contained in the service manual before using this device. 3. Do not attempt to disassemble the chassis, as to prevent damage. 6. Please connect in accordance with the instructions, to prevent the device from accidental damage. 7. Please don
Ganz Security ZM-L35T | Manual - Page 3
Exploring Your Test Monitor System indicator  Directional Buttons  MENU key  MODE key  POWER key  ISP interface  Power Switch  DC Jack  Cable test ´10 PTZ Protocol Test ´11 RS-232 Port ´12 Video Extension Cord ´13 Positive Probe ´14 Negative Probe Green Light : Power On Red Light :
Ganz Security ZM-L35T | Manual - Page 4
Functions & Operation Type A - Measurement 1. Video Level a. Power On device and push "MODE" key to go to the "VIDEO" page. b. Connect "Video Out" of device with "Video In" (yellow BNC connector) on video extension cord to measure the video level. c. System will auto-detect NTSC/ PAL video signal
Ganz Security ZM-L35T | Manual - Page 5
▲▼ buttons to navigate through the menu. Push the menu button to open the sub item. Use the ◄► buttons to change the settings. Follow the operation instructions of the speed dome for further changes. Save and call presets: Push the ▼and MENU button to open the preset menu, use the MODE button
Ganz Security ZM-L35T | Manual - Page 6
possibility to start a tour that is already programmed in the speed dome. Please refer to the predefined preset of the speed dome. Follow the operation instructions of the speed dome for further information. PTZ Speed: With this menu item you can adjust the speed of the navigation. With the ▲ and
Ganz Security ZM-L35T | Manual - Page 7
4. Cable Testj (Open or Short Circuit test for 2 sets of wires.) a. Switch "MODE" key to get "CABLE TEST" page. b. Connect two ends of termination with "Cable Test Terminal" to test whether circuit status is OK(Short) or NG(Open) as shown below. c. The 2 test channels are independent, to allow
Ganz Security ZM-L35T | Manual - Page 8
Type C - Video Pattern Generator 6. Standard Pattern Output (for monitor testing) a. Switch "MODE" key to get "PATTERN OUT" page. b. Connect the "Video In" of monitor with "Video Out" of video extension cord to display 8-color bar standard pattern, as shown below. c. Switch between NTSC / PAL video
Ganz Security ZM-L35T | Manual - Page 9
OSD Menu Illustration 1. Language: Press the "Menu" key  "Down" key  Language. Choose from English, Français, Deutsch, Italiano, ,Español, and Chinese languages. "Sleep Time" is a sleep mode timer setting; when the test monitor is not being used, the system will turn off power automatically after
Ganz Security ZM-L35T | Manual - Page 10
the F on the screen, this indicates that the fuse needs to be changed. For details on how to change the fuse, please check the user manual. When users see the flash of the F on the screen, the rest of the device functions should still work normally. 3. When the battery is totally
Ganz Security ZM-L35T | Manual - Page 11
Specifications Model Name Display Size Panel Backlight Display Resolution Charge Voltage Battery Charge Time Standby Time Video Level Measurement Pattern out PTZ Protocol Protocol Baud Rate AC Voltage Range DC Voltage Range Audio Test Cable Test Firmware Upgrade Weight Dimensions Operating