Ganz Security ZN-D100VE Manual

Ganz Security ZN-D100VE Manual

Ganz Security ZN-D100VE manual content summary:

  • Ganz Security ZN-D100VE | Manual - Page 1
  • Ganz Security ZN-D100VE | Manual - Page 2
    Manual INFORMATION TO USER CAUTION RISK OF ELECTRIC SHOCK, ! DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING and maintenance (servicing) instructions in the literature accompanying the appliance. 2010/2-1 03A.02
  • Ganz Security ZN-D100VE | Manual - Page 3
    5 3. PART NAMES ...6 4. INSTALLATION ...7 4.1. Installation Template...8 4.2. Manual adjustment for 3-axis movements 8 4.3. Lens Focus Adjustment 9 4.4. Setting the ...17 APPENDIX (B): DIMENSIONS 18 APPENDIX (D): TROUBLE SHOOTING 19 Checking your Firmware...19 Support ...19 2010/2-1 03A.02 3
  • Ganz Security ZN-D100VE | Manual - Page 4
    Manual 1. FEATURES Camera  Indoor Fixed Mini Dome IP Camera  High Quality Compression in real time streaming  1/4" VGA CMOS Streaming  Dual streaming mode (such as different codec/resolution/bit rate and so on.)  De-interlacing on DSP  Burnt-in text supported  Unicast/Multicast supported
  • Ganz Security ZN-D100VE | Manual - Page 5
    ZN-D100VE Installation Manual 2. PACKAGE CONTENTS Unpack carefully and handle the equipment with care. The packaging contains: ZN-D100VE DC power adaptor Extension cable (for LAN, power connector, and audio ) Quick Installation Guide Installation Template Hex wrench driver Screws and Anchor
  • Ganz Security ZN-D100VE | Manual - Page 6
    ZN-D100VE Installation Manual 3. PART NAMES ① ② ③ * Models herein and their appearance are subject to change without any prior notice. ①LAN Connector (Ethernet) This is a RJ45 LAN connector for 10/
  • Ganz Security ZN-D100VE | Manual - Page 7
    ZN-D100VE Installation Manual 4. INSTALLATION 1) Connect the LAN cable, power supply cable, and the ! mounting. To prevent any accident, make sure the ceiling is firm and stable enough to support the ZN-D100VE. If any reinforcement is needed, consult Caution with your safety personnel and proceed
  • Ganz Security ZN-D100VE | Manual - Page 8
    Installation Template 2-Ø6 Ø30 Ø125 68.5 4.2. Manual adjustment for 3-axis movements After installation, make a manual adjustment on the inner liner. Perform 3-axis movements manually by turning the inner liner to different directions as above, and check if it moves properly. After adjustment
  • Ganz Security ZN-D100VE | Manual - Page 9
    ZN-D100VE Installation Manual 4.3. Lens Focus Adjustment 1) Open the dome cover from the device. A 2) Uncover the latch(C) carefully to A remove the lens cover. 3) Rotate the lens focus ring(D) to
  • Ganz Security ZN-D100VE | Manual - Page 10
    ZN-D100VE Installation Manual 5. CONNECTIONS LAN DC 12V ! Make sure the polarity is correct. Incorrect connection may cause malfunction or damage to the IP device. Caution ! Caution Power Adaptor Connector (DC 12V) 2010/2-1 03A.02 10
  • Ganz Security ZN-D100VE | Manual - Page 11
    ZN-D100VE Installation Manual 6. CONFIGURATION 6.1.Set up network environment The default IP address of your IP device is 192.168.XXX.XXX. You can find the available IP address
  • Ganz Security ZN-D100VE | Manual - Page 12
    desired device and select Web view. 3. Select Continue to this website on the Security Certificate Alert page. (The explanation and captured images at this manual are mainly on the basis of Internet Explorer 7.0) 4. Click pop-up blocked and install the ActiveX control as below. You need to install
  • Ganz Security ZN-D100VE | Manual - Page 13
    ZN-D100VE Installation Manual 5. Wait for a few seconds while the web page loads. The live video is displayed as below. 6. If the live video is not displayed and "Can
  • Ganz Security ZN-D100VE | Manual - Page 14
    ZN-D100VE Installation Manual 6.2.2.View video using IP address View the live video on a web page using your seconds while the web page loads. The live video is displayed. 6.3. Reset Hardware Reset is NOT supported. (Software Reset is available.) 6.4. Factory Default Hardware Factory Reset is NOT
  • Ganz Security ZN-D100VE | Manual - Page 15
    ZN-D100VE Installation Manual APPENDIX (A): SPECIFICATIONS Summary Camera Module Image Sensor Length 3.6 mm, F.# 2.0, Board type, Lens for Security Camera Day & Night Not Supported Video Compression Format H.264, MPEG-4, MJPEG Selectable per Stream Number of Streams Resolution Dual Stream
  • Ganz Security ZN-D100VE | Manual - Page 16
    ZN-D100VE Installation Manual Electrical Characteristics Video Output Audio Input Audio Output Power Source(Approx) 1Vp-p, 75Ω Linein, 1.43Vp-p(Min 1.35Vp-p, max 1.49 Vp-p), 39 KΩ Lineout, 46mW Power, 16 Ω
  • Ganz Security ZN-D100VE | Manual - Page 17
    ZN-D100VE Installation Manual Imbedded Intelligence ZNS Presence (Included as Standard) High Performance ZNS Surveillance (Optional) Detection Behavior Stream or Analog video out (※Analog video out support can vary depending on the device model and hardware version and the firmware version)
  • Ganz Security ZN-D100VE | Manual - Page 18
    ZN-D100VE Installation Manual APPENDIX (B): DIMENSIONS .5 40 Ø124 R50 100 50 2010/2-1 03A.02 (Unit: mm) 18
  • Ganz Security ZN-D100VE | Manual - Page 19
    ZN-D100VE Installation Manual APPENDIX (D): TROUBLE SHOOTING Checking your Firmware Firmware is software that determines the functionality of the device. One of your first actions when troubleshooting a problem should be to check the currently installed version. The latest version may contain a
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19