Ganz Security ZN-D100VE Quick User Guide
Ganz Security ZN-D100VE Manual
 |
View all Ganz Security ZN-D100VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Ganz Security ZN-D100VE manual content summary:
- Ganz Security ZN-D100VE | Quick User Guide - Page 1
ZN-D100VE Quick User Guide This manual has been designed to guide you through basic settings of your IP devices, such as installation and configuration for using them. Step1. . Assemble and install IP device Manual adjustment for 3‐axis movements After installation, make a manual adjustment on the - Ganz Security ZN-D100VE | Quick User Guide - Page 2
fall off the ceiling even after the proper installation and mounting. To prevent any accident, make sure the ceiling is firm and stable enough to support the camera. If any reinforcement is needed, consult with your safety personnel and proceed with the installation. 2010/2‐1 2 - Ganz Security ZN-D100VE | Quick User Guide - Page 3
Step2. Connect cables to IP device Connect each cable to the device. To see the correct positions of all connectors, refer to the following image below. LAN DC 12V ! Caution * Models herein and their appearance are subject to change without any prior notice. Make sure the polarity is correct. - Ganz Security ZN-D100VE | Quick User Guide - Page 4
and enter the IP address of the device. 3. Click Continue to this website (not recommended) as below. (The explanation and captured images at this manual are mainly on the basis of Internet Explorer 7.0) 4. Click pop‐up blocked and install the ActiveX control as below. You need to install the - Ganz Security ZN-D100VE | Quick User Guide - Page 5
5. Wait for a few seconds while the web page loads. The live video is displayed as below. 6. If the live video is not displayed and "Can not Create XMLDOMDocument Install MSXML4.0" message is shown as below, please download and Install from the link below. http://www.microsoft.com/downloads/details. - Ganz Security ZN-D100VE | Quick User Guide - Page 6
, select Obtain an IP address via DHCP. To learn how to set up the web page for advanced configuration, refer to the Web Page User's Manual, which is available on the SDK at the following path. {SDK root}\DOC\ 2010/2‐1 6 - Ganz Security ZN-D100VE | Quick User Guide - Page 7
at the following SDK path. {SDK root}\BIN\TOOLS\AdminTool\ More Information To learn more about using other features of your devices, refer to the manual, which is available on the SDK at the following path. {SDK root}\DOC\ 2010/2‐1 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
2010/2
‐
1
1
ZN-D100VE
Quick User Guide
This manual has been designed to guide you through basic settings of your IP devices, such as installation and
configuration for using them.
Step1. . Assemble and install IP device
Manual adjustment for 3
‐
axis movements
After installation, make a manual adjustment on the inner liner. Perform 3
‐
axis movements manually by
turning the inner liner to different directions as above, and check if it moves properly. After adjustment,
fasten the screw of the rotation axis.
Lens Focus Adjustment
1)
Open the dome cover from the device.
2)
Uncover the latch(C) carefully to
remove the lens cover.
3)
Rotate the lens focus ring(D) to adjust
the focus and fasten the screw(E)
using the included hex wrench.
4)
Push the lens cover to the module
until the latch(C) clicks into position.
5)
Attach the dome cover by aligning
protrusion on the body (B) with the
inverted triangle mark of the dome
cover (A). Turn the dome cover
clockwise to lock.
A
B
C
* Models herein and their appearance are subject to change without any prior notice.
D
E