Ganz Security ZN-NH22XE Quick User Guide
Ganz Security ZN-NH22XE Manual
 |
View all Ganz Security ZN-NH22XE manuals
Add to My Manuals
Save this manual to your list of manuals |
Ganz Security ZN-NH22XE manual content summary:
- Ganz Security ZN-NH22XE | Quick User Guide - Page 1
ZN-NH22XE Quick User Guide This manual has been designed to guide you through basic installation, configuration and the webpage access cable to the 4‐pin auto iris connector on the side of the camera. 3. Manually adjust the zoom and focus of the image with the zoom lever and focus lever on the lens - Ganz Security ZN-NH22XE | Quick User Guide - Page 2
Step2. Connect cables Connect proper cables to the device. To see the correct positions of all connectors, refer to the following image below. * Model design and appearance are subject to change without any prior notice. PAL/NTSC Button Power DC 12V BNC Video Out * Use only for installation tests. - Ganz Security ZN-NH22XE | Quick User Guide - Page 3
the IP address. Refer to the Hexadecimal‐Decimal Conversion Chart at the end of the manual. (The MAC address of the device is attached on the side or bottom of of the device. 3. Web streaming and device configurations are supported through ActiveX program. When the ActiveX installation pop‐up window - Ganz Security ZN-NH22XE | Quick User Guide - Page 4
2. Right‐click the mouse and select "IP Address"; IP Setup window appears. Give new unique IP address in last two sets and mirror other information in other boxes PC environment Info 3. In the IP Setup's window, information under 'Local Network information' displays the user/PC's network area - Ganz Security ZN-NH22XE | Quick User Guide - Page 5
type root / pass. 2. Grant the AxUMF.cab setup and proceed with installations. 3. Follow the instructions of the dialog boxes and complete the installation. Once the installation is complete, the video stream is ." message appears, download and install the Microsoft Core XML Services (MSXML) 6.0. 5 - Ganz Security ZN-NH22XE | Quick User Guide - Page 6
, select Obtain an IP address via DHCP. To learn how to set up the web page for advanced configuration, refer to the Web Page User's Manual, which is available on the SDK at the following path. {SDK root}\DOC\ NC1202HD Ver1.0 6 - Ganz Security ZN-NH22XE | Quick User Guide - Page 7
. 2. Release the Reset button. 3. Wait for the system to reboot. More Information To learn more about using other features of your devices, refer to the manual, which is available on the SDK at the following path. {SDK root}\DOC\ NC1202HD Ver1.0 7 - Ganz Security ZN-NH22XE | Quick User Guide - Page 8
Hexadecimal-Decimal Conversion Table Refer to the following table when you convert the MAC address of your device to IP address. Hex Dec 00 0 01 1 02 2 03 3 04 4 05 5 06 6 07 7 08 8 09 9 0A 10 0B 11 0C 12 0D 13 0E 14 0F 15 10 16 11 17 12 18 13 19 14 20 15 21 16 22 17 23 18 24 19 25 1A 26 1B 27 1C
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
NC1202HD Ver1.0
1
ZN-NH22XE
Quick User Guide
This manual has been designed to guide you through basic installation, configuration and the webpage access
settings of the device.
Step1. Install the lens
1. Place the lens mount to the camera and
tighten the mount by turning clockwise.
2. Connect the lens cable to the 4
‐
pin auto
iris connector on the side of the camera.
3. Manually adjust the zoom and focus of the
image with the zoom lever and focus lever on
the
lens
mount.
(Refer
to
the
manual
provided with your lens.)
Auto Iris Lens
Connector
Light Sensor
Make sure that the light sensor is not blocked by lens cable or other objects.
Caution
!