Ganz Security ZN-PTZ12VN-XT Quick User Guide

Ganz Security ZN-PTZ12VN-XT Manual

Ganz Security ZN-PTZ12VN-XT manual content summary:

  • Ganz Security ZN-PTZ12VN-XT | Quick User Guide - Page 1
    Quick Installation Guide This manual has been designed to guide you through basic settings of your IP devices, such as prevent any accident, make sure the ceiling is firm and stable enough to support the camera. If any reinforcement is needed, consult with your safety personnel and proceed with the
  • Ganz Security ZN-PTZ12VN-XT | Quick User Guide - Page 2
    Step2. Connect cables to IP device Connect each cable to the device. To see the correct positions of all connectors, refer to the following image below. DC 12V AUDIO DI DO In Out RS-485 Vout 12V Reset Button AUDIO DI DO In Out RS-485 Vout 12V LAN Cable * Models herein and their
  • Ganz Security ZN-PTZ12VN-XT | Quick User Guide - Page 3
    Step3. Set up network environment The default IP address of your IP device is 192.168.XXX.XXX. You can find the available IP address from the MAC address of your device. Please make sure the device and your PC are on the same network segment before running the installation. If the network segment
  • Ganz Security ZN-PTZ12VN-XT | Quick User Guide - Page 4
    IP address. Refer to the Hexadecimal-Decimal Conversion Chart at the end of this manual. (The MAC address is attached on the side or bottom of the device need to install the ActiveX for displaying the images. 4. Follow the instructions of the dialog boxes and complete the installation. Then the live
  • Ganz Security ZN-PTZ12VN-XT | Quick User Guide - Page 5
    , select Obtain an IP address via DHCP. To learn how to set up the web page for advanced configuration, refer to the Web Page User's Manual, which is available on the SDK at the following path. {SDK root}\DOC\ EC551 Ver1.0 5
  • Ganz Security ZN-PTZ12VN-XT | Quick User Guide - Page 6
    Reset button after 5 seconds. 4. Wait for the system to reboot. More Information To learn more about using other features of your devices, refer to the manual, which is available on the SDK at the following path. {SDK root}\DOC\ EC551 Ver1.0 6
  • Ganz Security ZN-PTZ12VN-XT | Quick User Guide - Page 7
    Hexadecimal-Decimal Conversion Table Refer to the following table when you convert the MAC address of your device to IP address. Hex Dec 00 0 01 1 02 2 03 3 04 4 05 5 06 6 07 7 08 8 09 9 0A 10 0B 11 0C 12 0D 13 0E 14 0F 15 10 16 11 17 12 18 13 19 14 20 15 21 16 22 17 23 18 24 19 25 1A 26 1B 27 1C
  • Ganz Security ZN-PTZ12VN-XT | Quick User Guide - Page 8
    Hex Dec 80 128 81 129 82 130 83 131 84 132 85 133 86 134 87 135 88 136 89 137 8A 138 8B 139 8C 140 8D 141 8E 142 8F 143 90 144 91 145 92 146 93 147 94 148 95 149 96 150 97 151 98 152 99 153 9A 154 9B 155 9C 156 9D 157 9E 158 9F 159 Hex Dec A0 160 A1 161 A2 162 A3 163 A4 164 A5 165 A6 166 A7 167 A8
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

EC551 Ver1.0
1
Quick Installation Guide
This manual has been designed to guide you through basic settings of your IP devices, such as installation and
configuration for using them.
Step1. Assemble and install IP device
1)
Connect the LAN cable and power supply cable with
the camera. For the detailed information, please refer
to the Step 2.
2)
Place the installation template (which is included in
the package) on the ceiling
.
3)
Drill four holes on the template and insert anchor
blocks into the holes. Fasten the surface mount bracket
with screws.
4)
Put the main body on the surface mount bracket of
the camera. Make sure the bracket and the main body
fit each other into place.
5)
Fasten the main body with screws.
When assembling the main body of the camera and its dome cover, make sure they
fit each other into place.
The camera may fall off the ceiling even after the proper installation and mounting.
To prevent any accident, make sure the ceiling is firm and stable enough to support
the camera. If any reinforcement is needed, consult with your safety personnel and
proceed with the installation.
Caution
!