Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack Owne
Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack Manual
 |
View all Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack manuals
Add to My Manuals
Save this manual to your list of manuals |
Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack manual content summary:
- Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 1
GHC™ 50 Owner's Manual - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 2
the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 3
Table of Contents Introduction 1 Basic Autopilot Operation 1 Heading Screen 1 Standby Mode 2 Engaging the Autopilot 2 Disengaging the Autopilot 2 Heading Hold 2 Heading Adjustment 3 Powerboat Autopilot Operation......... 3 Steering Patterns 3 Following the U-Turn Pattern 3 Setting Up and - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 4
- Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 5
Safety and Product Information guide in the product box to the basic heading-hold functionality, the system allows manual steering and several modes of automaticsteering functions and patterns. of the autopilot system, see the installation instructions provided with the helm control and the autopilot - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 6
Autopilot status information and icon. Standby and appear in gray when the autopilot is in standby mode. Heading Hold and appear in green when the autopilot is engaged. Numeric heading information. Shows the actual heading when the autopilot is in standby mode. Shows the intended heading when the - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 7
: You must enable the Shadow Drive feature before you can adjust the heading using the helm while the autopilot is engaged . With the autopilot engaged, manually steer the boat using the helm. Shadow Drive and at the top of the heading screen appear in yellow, and you have full steering control - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 8
immediately drives the boat in a circle centered on the active waypoint and expands the spiral as it completes each circle. See the owner's manual for your Garmin chartplotter for more information about setting and using waypoints. You can adjust the distance between each circle in the spiral. The - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 9
Cancelling a Steering Pattern • Physically steer the boat. NOTE: Shadow Drive feature must be enabled to cancel a steering pattern by physically steering the boat. • Select Standby. Sailboat Autopilot Operation CAUTION When engaged, the autopilot controls only the rudder. You and your crew remain - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 10
Changing the Wind Hold Type With the wind hold engaged, select > Wind Hold Type. The wind hold type changes from Apparent to True, or vice versa. Engaging Wind Hold from Heading Hold Before you can engage wind hold, you must connect a NMEA 2000 wind sensor to the autopilot. 1 With heading hold - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 11
Gybe Inhibitor NOTE: The gybe inhibitor does not prevent you from manually performing a gybe using the helm or step steering. The gybe network as the autopilot. For configuration instructions, go to support .garmin.com, and download the configuration guide for your specific autopilot model. Adjusting - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 12
Drive feature has been disabled, you must enable it again before you can steer the boat manually to disengage the autopilot system. 1 From the autopilot screen, select > Autopilot Setup > see the Reactor autopilot remote control instructions at garmin .com 8 Autopilot Settings and Configuration - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 13
Control > Enable > New Connection. 2 Follow the on-screen instructions. Customizing the Autopilot Button Actions Before you can set the diagnostics report of the autopilot system to help with configuration and troubleshooting. 1 From the autopilot screen, select > Autopilot Setup > Diagnostics - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 14
can view the software version and the unit ID number. You may need this information to update the system software or for troubleshooting purposes. Select > Global Settings > System > System Information > Software Information. Viewing the Event Log The event log shows a list of system events. Select - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 15
Viewing E-label Regulatory and Compliance Information The label for this device is provided electronically. The e-label may provide regulatory information, such as identification numbers provided by the FCC or regional compliance markings, as well as applicable product and licensing information. Not - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 16
network password. Changing the Wireless Channel You can change the wireless channel if you have trouble finding or connecting to a device, or if you experience interference. 1 Select > Network. Go to garmin.com/support/software/marine.html for more information. 12 Device Settings and Preferences - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 17
Specifications Dimensions without sun cover (H × W × D) Dimensions with sun cover (H × W × D) Weight without sun cover Weight with sun cover Temperature range Compass-safe distance Case material Lens material Water rating Brightness Typical current draw at 12 Vdc Max. current draw at 12 Vdc Power - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 18
物質宣言 部件名称 铅 汞 镉 六价铬 多溴联苯 2 金属零件 SJ/T11364 GB/T26572 GB/T26572 产品 2403-2480 MHz 频段的 ANT 2403-2480 MHz 10 mW(e.i.r.p 170 kHz ISM 5000 15-55°C 9-32 Vdc 。 14 Specifications - Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 19
- Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 50 Instrument Pack | Owne - Page 20
support.garmin.com January 2023 GUID-BD39FCBD-2F6F-4A48-8A61-1FE1F349792B v2
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
GHC
™
50
Owner’s Manual