Garmin GHP 10 Marine Autopilot System GHC 10 Quick Start Manual
Garmin GHP 10 Marine Autopilot System Manual
View all Garmin GHP 10 Marine Autopilot System manuals
Add to My Manuals
Save this manual to your list of manuals |
Garmin GHP 10 Marine Autopilot System manual content summary:
- Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 1
GHC 10 quick start manual - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 2
the USA and other countries. GHP™, GHC™, GMI™, Shadow Drive™, and myGarmin™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. NMEA 2000® is a registered trademark of the National Marine Electronics Association. WARNING: See - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 3
GHP 10/10V autopilot system using the GHC™ 10 control unit. Through the GHC 10 control unit, you engage and steer, set up, and customize the GHP 10/10V autopilot system. To install the GHP 10/10V autopilot system, including the GHC 10 control unit, use the provided installation instructions. The GHP - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 4
Conventions In this manual, the GHP 10/10V autopilot system is referred to as the autopilot, and the GHC 10 control unit is referred to as the GHC 10. When you are instructed to select an item on the GHC 10, use the soft keys ( ) along the bottom of the screen to select each item. Small arrows - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 5
key to select highlighted items and open the menu. STBY (Standby)-used to place the autopilot in standby mode. Press STBY to stop the autopilot from any menu screen, at any time. Caution: Be ready to regain manual control of the boat when you place the autopilot in standby mode. GHC 10 Quick Start - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 6
the Heading Screen with the Autopilot in Standby Mode When you power the autopilot on, the system starts in standby mode, with the Heading screen displayed on the GHC 10. When in standby mode, the autopilot does not steer the boat-you are responsible for the helm. When in standby mode, the - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 7
not steer the boat while you have the helm, and the message "You Have the Helm" flashes at the top of the screen in yellow. If you manually maintain a specific heading for a few seconds, the autopilot resumes control of the new heading, and the message "Autopilot Engaged" is displayed at the top of - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 8
heading Manually Adjusting the Heading Note: If the autopilot is steering a pattern (page 7), manually 10, and configure the autopilot. When you select Menu from the Heading screen, the first option listed depends on the current state of the autopilot: • If you have the helm or if the autopilot - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 9
autopilot. To cancel the pattern, you can physically steer the boat, use the soft keys to manually adjust the heading, or press the STBY button. GHC 10 Quick Start Manual select Menu > Pattern Steering, and choose a pattern. 2. Select Engage to begin the pattern with the default values. OR Select - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 10
not determined by GPS and is affected by wind, current, and speed. Be ready to adjust the throttle and take the helm to avoid harm to a person in the water. The autopilot positions the boat so that the circle pattern is centered on the point at which you engage the pattern. GHC - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 11
, see the GHP 10/10V Installation Instructions. The GPS steering patterns are based on a GPS waypoint to which you are actively navigating using your optional GPS unit. This waypoint is called the active waypoint. For example, when you begin a Search GPS pattern, the autopilot first drives your boat - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 12
10 Search The Search GPS pattern steers the boat in increasingly larger circles (a spiral pattern) outward from the active waypoint. When you begin the Search GPS pattern, the autopilot drives 2. On the GHC 10, from the Heading screen, select Menu > GPS Steering > Route To. GHC 10 Quick Start Manual - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 13
Customizing the GHC 10 You can customize the display settings, the manual steering method, and other system settings. Changing the Display Settings To customize the display settings, press and quickly release the Power button Color Mode-select Day or Night colors. Backlight-set the backlight level - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 14
• Change Variance-manually adjust the heading reference. Beeper-set when the GHC 10 makes audible sounds. Auto Power-select if the unit powers on with the NMEA 2000 network. Language-select the on-screen language. System Information-view unit software information. Factory Defaults-reset the unit to - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 15
10 Remote Control To configure an optional remote control on the GHC 10, from the Heading screen, select Menu > Setup > Remote. You can connect one optional GHC 10 remote control to a GHC 10. Search for Remote-allow the GHC 10 to search for an optional GHC 10 remote control. Disconnect Remote-(only - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 16
the user autopilot configuration, select Menu > Setup > User Autopilot Configuration. Shadow Drive™-disable or re-enable the Shadow Drive. Caution: On a GHP 10 autopilot system, if you disable the Shadow Drive, you will need to place the autopilot on standby (STBY) to manually control the helm. Use - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 17
need to be adjusted. If the autopilot is not working correctly, contact your installer. For advanced autopilot configuration, see the GHP 10/10V Installation Instructions. Caution: Changes made to the configuration of the autopilot directly affect the behavior of the autopilot, and should be made by - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 18
that this GHP 10/10V autopilot system is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. To view the full Declaration of Conformity, see the Garmin Web site for your Garmin product: www.garmin.com/products/GHP10/. Click Manuals, and then select the - Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 19
- Garmin GHP 10 Marine Autopilot System | GHC 10 Quick Start Manual - Page 20
Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9RB UK Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan www.garmin.com Part
GHC 10
quick start manual