Garmin GHP 20 Marine Autopilot System for Viking Owner's Manual
Garmin GHP 20 Marine Autopilot System for Viking Manual
View all Garmin GHP 20 Marine Autopilot System for Viking manuals
Add to My Manuals
Save this manual to your list of manuals |
Garmin GHP 20 Marine Autopilot System for Viking manual content summary:
- Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 1
GHC 10 owner's manual - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 2
of Garmin. Garmin hereby grants permission to download a single copy of this manual onto Garmin products. Garmin®, and the Garmin logo trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. GHP™, GHC™, GMI™, Shadow Drive™, and myGarmin™ are trademarks of Garmin - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 3
operation of your vessel. The GHP™ 10/10V/12 is a tool that will autopilot. • Select or to highlight an option on a menu. Manual Conventions In this manual, the GHP autopilot system is referred to as the autopilot, and the GHC 10 control unit is referred to as the device. When you are instructed - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 4
Pattern 10 Search Pattern 10 Cancelling a GPS Steering Pattern 11 Sailboat Autopilot Operation. Appendix 19 12 Configuring the Autopilot.......... 19 Heading Hold 12 Software License Agreement... 19 Heading Adjustment 12 Declaration of Conformity Wind Hold 13 (DoC 19 Wind Hold - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 5
Started ➊ ➋➌ Item Description ➀ Standby ➁ Soft keys ➂ Power key GHC 10 Owner's Manual Turning On the Autopilot Select . Getting Started Turning Off the Autopilot Hold . Note: If more than one GHC 10 device is wired to turn on the autopilot, you must turn off all of the wired GHC 10 devices to - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 6
at the top of the heading screen. ➊ ➋ ➌ ➍ Item Description ➊ Autopilot status ➋ Actual heading ➌ Rudder position indicator (sailboat and rudder sensor- equipped powerboats only) ➍ Soft key functions 2 Refer to page 12 for information about the sailboat wind hold screen. GHC 10 Owner's Manual - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 7
is equipped with Shadow Drive™) or the soft keys on the autopilot. Powerboat Autopilot Operation Heading Adjustment with the Helm You can steer the boat manually from the helm while the autopilot is engaged. The autopilot does not steer the boat while you have the helm, and the message "You - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 8
step turn size. 3. Select Done. Steering with the Soft Keys With the autopilot engaged, you can manually adjust the heading from the heading screen. Note: If the autopilot is steering a pattern (page 5), manually adjusting the heading cancels the pattern. Select an option: • If you have step - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 9
is clear of obstacles. The autopilot can steer the boat in preset a GPS device connected to the autopilot. Zigzag Pattern The zigzag pattern steers Setup > Zigzag Period. 5. Select or to set the period. 6. Select Done. Powerboat Autopilot Select Engage. The autopilot follows the zigzag pattern, - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 10
➀. ➀ The autopilot positions the boat so that the circle pattern is centered on the location at which you engage the pattern. TIP: To quickly resume a pattern after you make a heading adjustment with the helm or the soft keys (page 3), select the center soft key twice. 6 GHC 10 Owner's Manual - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 11
turn. The autopilot follows the u-turn pattern, and the heading screen shows the direction of the turn ➀. ➀ Powerboat Autopilot Operation Man • Select to begin a port turn. When the u-turn is completed, the autopilot maintains the new heading. TIP: To quickly resume a pattern after you make a - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 12
steer the boat at the helm (if your autopilot is equipped with Shadow Drive). • Use the soft keys to manually adjust the heading. • Select STBY. GPS information on connecting a compatible GPS device, see the autopilot installation instructions. GPS steering patterns are based on a GPS waypoint to - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 13
you must define a route on your chartplotter. Refer to the owner's manual included with your chartplotter for information on how to define a route. From the heading screen, select Menu > GPS Steering > Route To. The autopilot steers your boat according to the route defined on your chartplotter, and - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 14
pattern. Setting up the Cloverleaf Pattern You can adjust the distance from the waypoint at which the autopilot turns your boat for another pass over the waypoint. The default setting turns the boat at a Search > Spacing. 2. Select or to set the spacing. 3. Select Done. GHC 10 Owner's Manual - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 15
Operation Cancelling a GPS Steering Pattern While following a GPS steering pattern, perform one of the following actions: • Physically steer the boat at the helm (if your autopilot is equipped with Shadow Drive). • Use the soft keys to manually adjust the heading. • Select STBY. ➊ GHC 10 Owner - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 16
. The autopilot steers your boat, and the heading screen shows your actual heading ➊ and intended heading ➋. ➊ ➋ Adjusting the Step Steering Increments 1. From the heading screen, select Menu > Step Turn Size. 2. Select or to set the step turn size. 3. Select Done. 12 GHC 10 Owner's Manual - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 17
the status of the autopilot. When the autopilot is not engaged, select Wind Hold to activate wind hold. The autopilot steers heading screen changes wind angle Sailboat Autopilot Operation Engaging Wind Hold From Heading Hold With heading hold engaged, select Menu > Wind Hold. The autopilot steers - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 18
soft key and is the same as the step steering increment (page 12). The heading dial on the wind screen shows your actual heading ➊ and intended heading ➋ while the autopilot steers the boat. ➊ ➋ Tack and Gybe You can set the autopilot to perform a tack or gybe while heading hold or wind hold is - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 19
right and center soft keys for one second. Sailboat Autopilot Operation Route To ‹ caution Garmin recommends using route to only under motor power. Using manual included with your chartplotter for information on how to define a route. From the heading screen, select Menu > Route To. The autopilot - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 20
demonstration mode. • System Information-shows the device ID numbers and software information for the GHC and GHP. • Factory Defaults- screen, select Menu > Setup > Remote. 2. Select Search for Remote, then hold the left and right double-arrow keys on the remote. The autopilot to searches for and - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 21
Setup > User Autopilot Configuration. • Shadow Drive™-enables the device to enter standby mode automatically when you manually does not apply to a GHP 10V or GHP 12 autopilot system. • Sea State Filtering- to 180°. • Tack/Gybe Delay-(sailboats only) the autopilot delays steering a tack or gybe after - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 22
sailboats only) autopilot a water speed sensor. • Wind Limiter-(sailboats only) during a gybe, the wind heading screen, select Menu > Setup > User Autopilot Configuration. 2. Select an option select Menu > Setup > User Autopilot Configuration > Power will deviate before the autopilot corrects it. TIP - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 23
(Europe) Ltd. by phone at 0808 2380000. • In Europe, go to www.garmin.com/support and click Contact Support for in-country support GHC 10 Owner's Manual Appendix Software License Agreement BY USING THE GHP 10/10V/12 AND THE GHC 10, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 24
. Warning! A gybe has been initiated. Would you The autopilot has detected that the user has attempted to like to continue? initiate a gybe. • Sounds alarm • GHC 10 prompts for user input. Selecting Gybe initiates the gybe, and selecting Cancel cancels the gybe. 20 GHC 10 Owner's Manual - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 25
9 Sailboat 15 S Sails, raising and lowering 13 Search 10 Sea State Filtering 17 Settings 16 Remote 16 System 16 User 17 Shadow Drive 17 Sensitivity 17 Support, product 19 T Tack/Gybe 14 From Heading Hold 14 From Wind Hold 15 Settings 14 Troubleshooting 20 Turning Off the Autopilot - Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 26
- Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 27
- Garmin GHP 20 Marine Autopilot System for Viking | Owner's Manual - Page 28
(excluding map data) throughout the life of your Garmin products, go to the Garmin Web site at www.garmin.com. July 2011 © 2011 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park
GHC 10
owner’s manual