Garmin GMR 406 Open Array GMR 404/406 Owner's Manual

Garmin GMR 406 Open Array Manual

Get Garmin GMR 406 Open Array PDF manuals and user guides View all Garmin GMR 406 Open Array manuals
Add to My Manuals
Save this manual to your list of manuals

Garmin GMR 406 Open Array manual content summary:

  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 1
    GMR 404/406 Owner's Manual
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 2
    , disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 3
    of the GMR 404/406 marine radar when viewed on a Garmin marine network chartplotter. Installing Your GMR 404/406 To install your GMR 404/406, refer to the GMR 404/406 Installation Instructions included in this box. If you experience difficulty installing the radar, contact Garmin Product Support or
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 4
    Contents Table of Contents Introduction i Installing Your GMR 404/406 i About This Manual i Product Registration iii Contact Garmin iii Software License Agreement iii Warnings iv Important Information iv Basic Operation 1 Understanding Radar 1 Understanding the Radar Display 2 Radar Page
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 5
    back of the GMR 404/406 pedestal door) in case your GMR 404/406 needs service. Keep the original sales receipt, or a photocopy, in a safe place. Serial Number Contact Garmin Contact Garmin if you have any questions while using your GMR 404/406. In the USA contact Garmin Product Support by phone
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 6
    Proposition 65. See www.garmin.com/prop65 for more information. Important Information The California Electronic Waste Recycling Act of 2003 requires the recycling of certain electronics. For more information on the applicability to this product, see www.erecycle.org. iv GMR 404/406 Owner's Manual
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 7
    GMR 404/406 is operated and adjusted using controls on your Garmin Marine Network chartplotter. You can view radar data on the Radar Page or as an overlay on the Map Page. All radar "Do you want to begin radar transmission?" is shown. Select Yes, and then press ENTER. GMR 404/406 Owner's Manual 
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 8
    " is shown while the radar antenna reaches nominal rotation speed. After the message disappears, the radar begins painting an image. Understanding the Radar Display The Radar Page shows a status bar is shown from your current position along the path of your current heading. GMR 404/406 Owner's Manual
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 9
    Garmin Marine Network chartplotter. Note: A software update may be needed for the radar to function properly. If the message "Incompatible Software Version" appears when you turn on your chartplotter, you must update your chartplotter software. A software update card is provided with the GMR 404/406
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 10
    EBL, MARPA, and Hide/Show Navigation Features. To select an adjustment option from the Radar Page 1. Press ADJ/MENU to open the Radar adjustment menu. 2. Press up or down on the ROCKER to highlight the option you rain at close ranges (use the slider to select 1-100%).  GMR 404/406 Owner's Manual
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 11
    Operation > Radar Page Target Expansion Use Target Expansion to increase the size of a target. Select On or Off. NOTE: The Target Expansion setting has no effect at range scales of 4 nm or greater. Target Expansion Off Target Expansion On Zoom view Selection box GMR 404/406 Owner's Manual 
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 12
    To Define a Guard Zone: 1. Highlight Show Guard Zone 1 or 2, and press ENTER. 2. Highlight Adjust, and press ENTER. 3. Using the ROCKER, define the area on the Radar Page by adjusting three points: • Corner 1 • Corner 2 • Circular 4. Press ENTER to set the Guard Zone. GMR 404/406 Owner's Manual
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 13
    (Hide) and Adjust. Variable Range Marker(VRM) Electronic Bearing Line (EBL) Basic Operation > Radar Page You can adjust the diameter of the VRM and the angle of the EBL. To 2: On the Radar Adjustment menu, highlight Show VRM/EBL 1 or VRM/EBL 2, and then press ENTER. GMR 404/406 Owner's Manual 
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 14
    Page MARPA The Mini Automatic Radar Plotting Aid (MARPA) function helps the NMEA sentence HDM or HDG at format 0183, v2.30 or higher. The Gamin Marine Network was tested using the KVH® 1000 heading sensor using six second dampening. For each target Lost target  GMR 404/406 Owner's Manual
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 15
    , press ADJ/MENU to access radar options. Note: Changing the map scale does not change the radar range. When you zoom in or our on the Map Page, the radar overlay is scaled to fit. To overlay radar data on the Map Page: On the Map Page, press the Show Radar soft key. GMR 404/406 Owner's Manual 
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 16
    data overlay on the Map Page: 1. Press the Radar Options soft key. 2. Press the Hide Radar soft key. The radar overlay is hidden. Radar Tab When GMR 404/406 is connected to a Garmin Marine Network chartplotter, and either the Auto-Detect Services or Radar check box is selected on the System tab, the
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 17
    switching to transmission for the amount of time entered in the Timed Transmit XMIT Time field. When the radar is in standby mode, the scanner does not rotate or transmit; however, power is still applied to your location on the screen according to the current speed. GMR 404/406 Owner's Manual 11
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 18
    • Waypoints-show user waypoints on the Radar Page. • Bearing Line-show a bearing line on the Radar Page. The bearing line appears as time interval. This setting determines the length of the Vector Line, based on the time interval setting and the target's speed. The time GMR 404/406 Owner's Manual
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 19
    to offset the front of the boat if you mount the radar at an angle. • Antenna Size-allows you to select the size of your antenna The available Advanced sub tab settings are: (4 Foot or 6 Foot). Select 4 Foot for a GMR 404 radar; select 6 Foot for a GMR 406 radar. GMR 404/406 Owner's Manual 13
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 20
    Antenna Rotation: 24 rpm and 48 rpm Maximum Wind Load: 100 kts Receiver Noise Figure: Less than 4 dB Environmental: Temp: -10ºC to +60ºC Humidity: 95% at 35ºC Rel Wind: 100 kts Waterproof to IEC 60529 IPX6 Range: 20 meters minimum, 72 nm max Range Discrimination: 20 meters GMR 404/406 Owner's Manual
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 21
    Antenna RPM: Selectable to 24 or 48 rpm MARPA: Tracks up to 10 MARPA targets for radar plotting and collision avoidance. (Heading sensor is required). Appendix > European License Requirements European License Requirements The following table shows European License requirements for the GMR 404/406
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 22
    To obtain warranty service, contact your local Garmin authorized dealer or call Garmin Product Support for shipping instructions and an RMA (0) 870.8501251 Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan Tel. 886/2.2642.9199 Fax 886/2.2642.9099 GMR 404/406 Owner's Manual
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 23
    , declares that this GMR 404/406 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. To view the full Declaration of Conformity, see the Garmin Web site for your Garmin product: http://www.garmin.com/products/gmr404/. Click Manuals, and then select
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 24
    services 10 B Bearing Line 12 bearing reference 11, 12 begin transmitting 9 C center offset 11 clutter rain 4 sea 4 configuring Radar Page 3 cross-talk rejection 11 D digital navigation data 2 Display sub tab 11 E EBL 7 enter standby 9 18 F FTC 4 G gain 4 Garmin Marine 5 GMR 404/406 Owner's Manual
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 25
  • Garmin GMR 406 Open Array | GMR 404/406 Owner's Manual - Page 26
    (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. © 2006, 2007 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
Owner’s Manual
GMR 404/406