Garmin GPSMAP 6012 Technical Reference for Garmin NMEA 2000 Products
Garmin GPSMAP 6012 Manual
View all Garmin GPSMAP 6012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Garmin GPSMAP 6012 manual content summary:
- Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 1
Technical Reference for Garmin® NMEA 2000® Products + - - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 2
reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored use and operation of this and other Garmin products. Garmin®, the Garmin logo, and GPSMAP® are trademarks of Garmin Ltd. or its subsidiaries, registered in - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 3
chartplotters ◦ GMI™ 10 ◦ GPS 17x ◦ GFS™ 10 ◦ GRA™ 10 ◦ GET™ 10 ◦ GFL™ 10 ◦ GBT™ 10 ◦ GST™ 10 ◦ Intelliducers™ ◦ GWS™ 10 ◦ GHP™ 10 (CCU and GHC™ 10) ◦ GXM™ 51 ◦ VHF 200/300 ◦ AIS 300 ◦ AIS 600 Note: PGN information is also included in the installation instructions provided with the Garmin NMEA - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 4
Network...3 Existing NMEA 2000 Installation Considerations...8 NMEA 2000 Glossary...8 General NMEA 2000 Data Type Requirements...9 NMEA 2000-Certified Display Device PGN Information...13 NMEA 2000-Certified Sensor PGN Information...18 GPS 17x (GPS Antenna)...18 GFS 10 (Garmin Fuel Sensor)...18 GRA - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 5
page 8. After you have installed your NMEA 2000 network, use the checklist on page 37 to verify the installation. Garmin NMEA 2000 Device Overview Garmin uses NMEA 2000 micro connectors network on your boat, this guide will help you assemble one. Technical Reference for Garmin NMEA 2000 Products - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 6
connectors are used to create custom-length drop cables and custom-length backbone extension cables. The field-installable connectors can be used to shorten any Garmin NMEA 2000 drop/backbone cable. ** The gray in-line lightning arrestor is designed to help prevent damage due to nearby lightning - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 7
Equivalency Number) Fuel sensor Marine instrument Chartplotter Intelligent transducer Ignition or in-line others may require a separate power connection. Consult the installation instructions for each device you connect to your NMEA 2000 8) Technical Reference for Garmin NMEA 2000 Products - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 8
cables. To NMEA 2000 devices and power Female terminator CORRECT Backbone extension cable Male terminator T-connector installed incorrectly Male terminator (also installed incorrectly) Correct Linear Backbone Construction To NMEA 2000 devices and power INCORRECT Backbone extension cable Male - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 9
interference, connect the NMEA 2000 power cable directly to the battery and install an in-line switch. caution: If you connect the NMEA 2000 shield-drain wire to the same location as the ground (black) wire. The Garmin NMEA 2000 power cable connects to a T-connector like other drop cables. Be sure - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 10
load function correctly. Voltage Drop Right = 0.053 × (2 + 10 + 6) × (5 + 7) × 0.1 = 1.145 Vdc Note: The equation and examples provide conservative estimates for calculating voltage drop. Technical Reference for Garmin NMEA 2000 Products - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 11
is built with correct linear backbone construction, use one female terminator and one male terminator. Install the terminators at opposite ends of your NMEA 2000 network. To NMEA 2000 devices and use one in-line terminator on a NMEA 2000 network. Technical Reference for Garmin NMEA 2000 Products - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 12
Installation Considerations If your boat has an existing NMEA 2000 installation, and you would like to add Garmin NMEA 2000 equipment, there are a few things to consider: Cable Type: Garmin may only receive data transmitted by other devices on the network, or may both transmit and receive data on - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 13
Garmin Chartplotter and GPS Antenna Garmin Chartplotter and GPS Antenna Garmin Chartplotter Garmin Chartplotter and GPS Antenna Garmin Chartplotter and GPS Antenna Garmin Chartplotter and GPS Antenna Garmin Chartplotter and GPS Antenna Heading Sensor GPS Antenna Technical Reference for Garmin - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 14
, 129029 - GNSS Position, and 129284 - Nav Data Garmin Chartplotter and GPS Antenna 129026 - COG/SOG and 129029 - GNSS Position GPS Antenna 129026 - COG/SOG and 129029 - GNSS Position GPS Antenna 129026 - COG/SOG and 129029 - GNSS Position GPS Antenna 129026 - COG/SOG and 129029 - GNSS Position - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 15
[129026 - COG/SOG and 129029 - GNSS Position]) Either a Wind Sensor and Speed Sensor or a Wind Sensor and a GPS Antenna Waypoint VMG 129284 - Nav Data Garmin Chartplotter and GPS Antenna Maximum Apparent Wind Speed 130306 - Wind Data Wind Sensor Maximum True Wind Speed 130306 - Wind Data and - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 16
- GNSS Position None None Typical Sender Depth Transducer Water Temperature Sensor Water Speed Sensor GPS Antenna, Water Speed Sensor, and Heading Sensor GPS Antenna, Water Speed Sensor, and Heading Sensor GPS Antenna GPS Antenna None None 12 Technical Reference for Garmin NMEA 2000 Products - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 17
display devices. For NMEA 2000 configuration information on every available Garmin NMEA 2000-certified display device, see the owner's manual for your display device. GPSMAP 6000/7000 Series Chartplotters Receive 059392 ISO Acknowledgment 059904 ISO Request 060928 ISO Address Claim 126208 - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 18
NMEA 2000-Compatible Display Device PGN Information GPSMAP 4000/5000 Series Chartplotters Receive 059392 059904 060928 126208 126464 126992 126996 127250 127488 127489 127505 Data Navigation - Route/Waypoint Information Wind Data Temperature 14 Technical Reference for Garmin NMEA 2000 Products - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 19
GPSMAP 700 Series Chartplotters Receive 059392 ISO Acknowledgment 059904 ISO Request 060928 ISO Address Claim 126208 NMEA - Command/Request/Acknowledge Group Function 126464 Transmit/Receive GNSS DOPs GNSS Sats in View Wind Data Technical Reference for Garmin NMEA 2000 Products 15 - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 20
GPSMAP 4x1/5x1 Series Chartplotters Receive 059392 ISO Acknowledgment 059904 ISO Request 060928 ISO Address Claim 126208 NMEA - Command/Request/Acknowledge Group Function 126464 Transmit/Receive GNSS DOPs GNSS Sats in View Wind Data 16 Technical Reference for Garmin NMEA 2000 Products - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 21
Address Claim NMEA - Command/Request/Acknowledge Group Function Transmit/Receive PGN List Group Function System Time Product Information Vessel Heading /Acknowledge Group Function Transmit/Receive PGN List Group Function Product Information Technical Reference for Garmin NMEA 2000 Products 17 - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 22
proprietary PGN information for all Garmin NMEA 2000-certified sensors. GPS 17x (GPS Antenna) Transmit Receive 059392 060928 126208 126464 126992 when calibrated using a Garmin chartplotter or marine instrument) GRA 10 (Garmin Rudder Angle Adapter) Transmit Receive 059392 ISO Acknowledgment - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 23
126208 ISO Acknowledgment ISO Request ISO Address Claim NMEA - Command/Request/Acknowledge Group Function GBT 10 (Garmin Bennett Trim Tab Adapter) Transmit Receive 059392 ISO Acknowledgment 059392 060928 ISO Address Claim 059904 126208 NMEA - Command/Request/Acknowledge Group Function - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 24
NMEA 2000-Certified Sensor PGN Information GWS 10 (Garmin Wind Sensor) Transmit 059392 ISO Acknowledgment 060928 ISO Address Claim 126208 NMEA - Command/Request/Acknowledge Group Function 126464 Transmit/Receive PGN List Group Function 126996 Product Information 130306 Wind Data - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 25
ground) - Rapid Update GNSS (Global Navigation Satellite System) Position Data VHF 300 Receive 059392 ISO Acknowledgment 059904 ISO Request 060928 ISO Address Claim 126208 NMEA - Command/ Frequency/Mode/Power DSC Call Information Technical Reference for Garmin NMEA 2000 Products 21 - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 26
ISO Address Claim NMEA - Command/Request/Acknowledge Group Function System Time AIS 600 Receive 059392 059904 060928 126208 126992 ISO Acknowledgment ISO Request ISO Address Claim NMEA - , Part A AIS Class B "CS" Static Data Report, Part B 22 Technical Reference for Garmin NMEA 2000 Products - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 27
Navigation Overlay Service) When enabled, WAAS/EGNOS provides more-accurate position information. For more information on WAAS/EGNOS, visit www.garmin.com. 1. While viewing the NMEA 2000 configuration menu, select the GPS 17x device. 2. Select Config > WAAS/EGNOS. 3. On a Garmin chartplotter, select - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 28
. Using Fuel-Level Information With a Garmin Chartplotter or Marine Instrument To receive fuel-level information, connect the wiring harness on the GFS 10 to the fuel gauge or fuel-level sensor of your boat according to the GFS 10 Installation Instructions. To calibrate fuel-level information from - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 29
Troubleshooting Fuel Gauge Type When wired to a fuel gauge, the gauge type defaults to Auto Detect. If the fuel-level reading on your Garmin chartplotter test. Troubleshooting the Fuel-Flow Reading If the fuel-flow information received from the GFS 10 appears inaccurate, you can manually adjust the - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 30
most Garmin chartplotters, select Review > Rudder Angle Calibration. • For other Garmin marine devices, select Config > Rudder Angle Calibration. 4. Follow the on-screen instructions to calibrate the starboard and port rudder angles. 5. Select OK when the calibration is complete. Troubleshooting the - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 31
When you troubleshoot the gauge-type setting, if the rudder-angle reading on a connected Garmin chartplotter or marine Garmin chartplotters, select Review > Engine Tilt Calibration. • For other Garmin marine devices, select Config > Engine Tilt Calibration. 4. Follow the on-screen instructions - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 32
Garmin chartplotters, select Review > Engine Number. • For other Garmin marine devices, select Config > Engine Number. 3. Select the number of the engine that the adapter is associated with. 4. Select Done. Troubleshooting on the version of software loaded on your Garmin marine instrument, the - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 33
to. When you troubleshoot the gauge-type setting, if the engine-tilt reading on a connected Garmin chartplotter or marine instrument changes device. 2. Select an option: • For most Garmin chartplotters, select Review > N2K Fluid Type. • For other Garmin marine devices, select Config > N2K Fluid Type - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 34
list, select the GFL 10 device. 2. Select an option: • For most Garmin chartplotters, select Review > Tank Number. • For other Garmin marine devices, select Config > Tank Number. 3. Select a tank number. 4. Select OK. Troubleshooting the Gauge Type When connected to a gauge, the GFL 10 adapter gauge - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 35
device. 2. Select an option: • For most Garmin chartplotters, select Review > Gauge Type. • For other Garmin marine devices, select Config > Gauge Type. 3. Are Not Displayed Depending on the version of software loaded on your Garmin marine instrument, the specific configuration options may not - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 36
list, select the GBT 10 device. 2. Select an option: • For most Garmin chartplotters, select Review > Trim Tab Calibration. • For other Garmin marine devices, select Config > Trim Tab Calibration. 3. Follow the on-screen instructions to calibrate the trim tab position. Configuring the GBT 10 Adapter - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 37
select the GST 10 device. 2. Select an option: • For most Garmin chartplotters, select Review > Calibrate Water Speed. • For other Garmin marine devices, select Config > Calibrate Water Speed. 3. Follow the on-screen instructions to calibrate the water speed. Assigning a NMEA 2000 Temperature Source - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 38
Done. Troubleshooting the Displayed Depending on the version of software loaded on your Garmin marine instrument, the specific configuration Select an option: • For most Garmin chartplotters, select Review > Generic Config. • For other Garmin marine devices, select Config >Generic Configuration - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 39
one of the GST 10 devices assigned to the same temperature source. 2. Select an option: • For most Garmin chartplotters, select Review > Generic Config. • For other Garmin marine devices, select Config >Generic Configuration. 3. Enter the following command: "INSTANCE=" 4. After the command, enter - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 40
at the surface. Keel Offset GWS 10 (Garmin Wind Sensor) Configuring the Wind Angle Offset (Orientation) When mounting the sensor, you must adjust the angle offset if you did not orient the GWS 10 as described in the GWS 10 Installation Instructions. To configure the wind angle offset (orientation - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 41
on wind conditions. Configuring the GWS 10 if the Filter and Offset Selections Are Not Displayed Depending on the version of software loaded on your Garmin marine instrument, the specific configuration options may not be displayed on the configuration screens. To configure the wind angle offset if - Garmin GPSMAP 6012 | Technical Reference for Garmin NMEA 2000 Products - Page 42
connected through the ignition switch-if not, did you install a switch? (page 5) Is the NMEA 2000 power software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. July 2010 © 2009-2010 Garmin Ltd. or its subsidiaries Garmin
+
-
Technical Reference
for Garmin
®
NMEA 2000
®
Products