Garmin MSC 10 Marine Satellite Compass Mounting Template
Garmin MSC 10 Marine Satellite Compass Manual
![]() |
View all Garmin MSC 10 Marine Satellite Compass manuals
Add to My Manuals
Save this manual to your list of manuals |
Garmin MSC 10 Marine Satellite Compass manual content summary:
- Garmin MSC 10 Marine Satellite Compass | Mounting Template - Page 1
a mounting template on your own. Use the template that came in the product box. If you do print the template, you must follow these instructions for printing a mounting template precisely. To print large templates, you need large enough paper and printer. Failure to have the correct sized paper and - Garmin MSC 10 Marine Satellite Compass | Mounting Template - Page 2
MSC 10 Surface Mount Template 5 mm (3/16 in.) 25 mm (1 in.) January 2021 © 2020 Garmin Ltd. or its subsidiaries Printed in Taiwan 190-02820-04_0B
![](/manual_guide/products/garmin-msc-10-marine-satellite-compass-mounting-template-9cc3ae2/1.png)
Printing a Mounting Template
NOTICE
It is not recommended that you print a mounting template on your own. Use the template that came in the product box.
If you do print the template, you must follow these instructions for printing a mounting template precisely. To print large templates,
you need large enough paper and printer. Failure to have the correct sized paper and printer, or a failure to follow these instructions,
may result in an incorrectly sized template and therefore an incorrect cutout (too large or too small) on the mounting surface of your
boat.
1
Select
File
>
Print
.
2
Enter
2
in
Pages to Print
➊
.
3
Select
Actual Size
➋
for
Page
Sizing & Handling
.
4
Verify that the paper size is larger
than the template
➌
.
In this example, the paper is not
larger than the template.
5
If the paper size is not large
enough, select
Properties
➍
and select a
Paper Size
that is
larger than the template.
6
After printing the template, use
a ruler to measure at least one
dimension line to ensure the
template printed to 100% scale.
NOTICE
Garmin is not responsible for any damages or expenses resulting from a miscut mounting surface arising from a failure to follow
these instructions.
➋
➌
➍
➊