Garmin Oregon 550t Quick Start Manual

Garmin Oregon 550t - Hiking GPS Receiver Manual

Garmin Oregon 550t manual content summary:

  • Garmin Oregon 550t | Quick Start Manual - Page 1
    OREGON® series 450, 450t, 550, 550t quick start manual
  • Garmin Oregon 550t | Quick Start Manual - Page 2
    units operate on two AA batteries. Use alkaline, NiMH, or lithium batteries. Use precharged NiMH or lithium batteries for best results. Standard alkaline batteries are not recommended for Oregon 550 units when using the camera feature. To install the batteries: 1. Lift the latch and remove the
  • Garmin Oregon 550t | Quick Start Manual - Page 3
    plan to use the Oregon for several months. Stored data is not lost when batteries are removed. To turn the Oregon on or off: 1. To turn on the Oregon, press . 2. To turn off the Oregon, press and hold . To adjust the backlight level: 1. While the Oregon is on, press and quickly release . 2. Touch or
  • Garmin Oregon 550t | Quick Start Manual - Page 4
    , regardless of the direction you are moving. If the bearing pointer points toward the top of the compass, you are traveling , experiencing temperature changes, or changing the batteries. To calibrate the electronic compass: 1. While outdoors, hold the Oregon level and do not stand near objects that
  • Garmin Oregon 550t | Quick Start Manual - Page 5
    information about a point on the map: 1. Touch the location you want to review. 2. Touch the information button at the top of the screen. To mark your current Touch Waypoint Manager. 2. Touch the waypoint you want to reposition. 3. Touch Reposition Here. Oregon Series Quick Start Manual 
  • Garmin Oregon 550t | Quick Start Manual - Page 6
    course. 5. Touch > Compass. 6. Use the compass to navigate to your destination. To navigate to a point on the map: 1. Touch Map. 2. Touch the point on the map Touch a category. 3. Touch the first item on the route. 4. Touch Use > . 5. Repeat until the route is complete. 6. Touch
  • Garmin Oregon 550t | Quick Start Manual - Page 7
    Not Record; Record, Do Not Show; or Record, Show On Map. If you select Record, Show On Map, a line on the Map page indicates your track. To clear your current track: Touch Setup > Reset > Clear Current Track > Yes. Visit www.garmin.com for additional documentation and information. To connect your
  • Garmin Oregon 550t | Quick Start Manual - Page 8
    For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. © 2009 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty House,
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

OREGON
®
series
quick start manual
450, 450t, 550, 550t