GE 25001 Instruction Manual
GE 25001 Manual
 |
View all GE 25001 manuals
Add to My Manuals
Save this manual to your list of manuals |
GE 25001 manual content summary:
- GE 25001 | Instruction Manual - Page 1
RM25001 Universal Remote Instruction Manual - GE 25001 | Instruction Manual - Page 2
12 Sleep Timer 13 Code Learning 14 Tips on Learning 14 IR Transmitter Finder Feature 16 Learning Commands 16 Clearing Commands 18 Clearing Learned commands for a mode ..... 18 Master Clear 18 Troubleshooting 19 Congratulations on your purchase of this RM25001 Universal Remote Control. It is - GE 25001 | Instruction Manual - Page 3
. Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV.CHAN may be ) or DVD Subtitle toggle. GUIDE (after pressing SHIFT) brings up the DVD Title Menu screen. Displays on-screen program guide. 5. SHIFT Press and release - GE 25001 | Instruction Manual - Page 4
off if the buttons are depressed more than 30 seconds. This will save your batteries should your remote get stuck in a place where the buttons remain depressed (e.g., between the sofa cushions). Code Saver Codes are stored in permanent memory while you are changing batteries so you will not lose any - GE 25001 | Instruction Manual - Page 5
your product does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the device (TV, VCR, etc.) to be controlled. 2. Press and hold the SETUP button until the green indicator stays - GE 25001 | Instruction Manual - Page 6
for all Modes. Note this feature is not supported by all codes. VCR/DVD/DVR Punch-Through Feature This remote allows the 6 VCR transport buttons (i.e. PLAY, PAUSE, STOP, FF, REWIND, and REC) to Punch-Through control from any Mode programmed with TV, SAT or Cable codes to the last VCR, DVD or DVR - GE 25001 | Instruction Manual - Page 7
and release the desired Mode button (TV, VCR, etc.) for Volume/Mute control, the green indicator blinks then stays on. 4. Press and release the MUTE /Mute control. Sleep Timer The SLEEP button enables the remote to turn off your TV after a period of 1 to 99 minutes as shown below. The remote must be - GE 25001 | Instruction Manual - Page 8
under the VCR Mode, etc. If you are trying to learn from a "Universal" remote, it might have more than one code type stored under a Mode. Try learning from another remote to see if there's a problem with the type or brand of remote you are trying to learn from. a. Some functions from some types of - GE 25001 | Instruction Manual - Page 9
If there is a learning problem, the green indicator blinks for three seconds and stays on. If this happens, repeat Steps 4 to 6. 7. Repeat Steps 4-6 for other buttons you want to learn. 8. Press and release the SETUP button when all desired remote commands are learned. Code Learning is now complete - GE 25001 | Instruction Manual - Page 10
should you lose your codes or programming instructions, you can find available on our website: www.jascoproducts.com Troubleshooting Remote does not operate your product. • Press the mode button of the product you want to control. • Program the remote with a new code. • Install new batteries. (You - GE 25001 | Instruction Manual - Page 11
RM25001 Universal Remote Instruction Manual Jasco Products Company 311 N.W. 122nd Oklahoma City, OK 73114 Made in China RM25001-04/06
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
 |
 |
Universal Remote
Instruction Manual
RM25001