GE JASRM24911 User Guide

WARNING

Risk of electric shock

•

Keep children away

•

Use indoors only

•

Do not use in wet locations

Risk of fire

•

Do not exceed electrical ratings

Enclosed you will find

• (1) Keychain Remote

• (1)

Indoor Plug-in Receiver

Any transmitter in the GE Home Automation

product line is capable of controlling every

receiver—the ultimate in home convenience.

Control any number of

light fixtures or appliances

from up to 150f

t

*

away by

choosing the transmitter and receiver

combination that best suits your needs.

Indoor Wireless

Remote Light Control

User’s Manual

1

2

3

4

5

6

7

8

Operating Instructions

FOR INDOOR USE ONLY

1. Remove the small tab on the back of unit labeled HOUSE CODE

using a small screwdriver.

2. Set the HOUSE CODE to any one of the following settings:

NOTE:

Make sure ALL your devices have the same HOUSE CODE setting.

The remotes WILL NOT control

the receivers if they have different HOUSE CODE settings.

IMPORTANT!

HOUSE CODES help eliminate interference (devices randomly turn on /off).

If you experience interference, change the HOUSE CODE on all your remotes and

receivers to a different setting.

3. Replace the HOUSE CODE tab.

4. Set the CHANNEL by using knob on front as shown.

NOTE:

If you set your Indoor Plug-in Receiver to CHANNEL 1,

the unit can be controlled using any remote set to CHANNEL 1. If you set your Indoor Plug-in Receiver to

CHANNEL 2, the unit can be controlled using any remote set to CHANNEL 2 … and so on.

IMPORTANT!

A transmitter will control a receiver ONLY if they have the same

HOUSE CODE and CHANNEL settings.

5. Plug Indoor Plug-in Receiver into a powered, grounded 125VAC outlet.

6. Plug the lamp/appliance you wish to control into the Indoor Plug-in Receiver as shown.

CAUTION: WHEN THE INDICATOR LIGHT IS ON, THE OUTPUT OUTLET IS POWERED.

DO NOT CONNECT / DISCONNECT DEVICES TO / FROM THE OUTLET ONCE IT IS POWERED.

Operating Instructions - Keychain Remote

1. Remove the battery compartment cover.

2. Set the HOUSE CODE to any one of the following settings:

3. Replace the battery compartment cover.

4. Set the CHANNEL by using the knob on front as shown.

NOTE:

If you set your Keychain Remote to CHANNEL 1,

the unit can control any receiver set to CHANNEL 1.

If you set your Keychain

Remote to CHANNEL 2, the unit can control any receiver set

to CHANNEL 2 ... and so on.

5. Use the toggle button to activate the Keychain Remote (ON/OFF operation).

Make sure to press

firmly and for a minimum of 1 second for best results.

An indicator lights RED

when a signal

is sent.

6. Using any of the receivers set to the same CHANNEL and HOUSE CODE, test the installation by using

the ON and OFF buttons.

Specifications

Keychain Remote

Battery Type

....................................................................................................

Use ONLY A23 (12V) Alkaline

NOTE:

The functional range will decrease as the battery wears out so make sure to replace the

battery every 6 months for best results.

Indoor Outlet Adapter

FOR INDOOR USE ONLY

DO NOT EXCEED ELECTRICAL RATINGS

Electrical Rating

....................................................................

..............................................................

120V, 60Hz

Maximum Resistive Load

......................................................................................................................

1200W

Maximum Tungsten Load

........................................................................................................................

600W

Maximum Motor Load

..............................................................................................................................

1/3HP

*Functional range may be adversely affected by one or more of the following factors: weather, radio frequency

interference, low transmitter battery and obstructions between the transmitter and receiver.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and;

2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Note:

The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

8

7

6

5

4

3

Off

is a trademark of the

General Electric Company

and is used under license to

Jasco Products Company LLC,

10 E. Memorial Rd.,

Oklahoma City, OK 73114

www.jascoproducts.com.

90 DAY LIMITED WARRANTY:

Jasco Products

Company warrants this product to be free from

manufacturing defects for a period of 90 days from

the original date of consumer purchase.

This warranty is limited to the repair or replacement

of this product only and does not extend to

consequential or incidental damage to other

products that may be used with this unit.

This

warranty is in lieu of all other warranties express or

implied.

Some states do not allow limitations on

how long an implied warranty lasts or permit the

exclusion or limitation of incidental or

consequential damages, so the above limitations

may not apply to you.

This warranty gives you

specific rights, and you may also have other rights

which vary from state to state.

If unit should prove

defective within the warranty period, return prepaid

with dated proof of purchase to:

Jasco Products Company

10 E. Memorial Rd.

Oklahoma City, OK

73114

51135

02/10

Expanding your system

These devices operate on any of 8 user-settable channels. The channels are easy to set and

adjust with the simple turn of a knob.

The following table is one example of how you can

configure your system:

Area

CH

Remotes

Receivers

Bedroom

1

Bedside - Remote Light Switch

(2) Bedside Lamps - (2) Socket Adapters

Entrance - Keychain Remote

Corner Torchiere - Indoor Plug-in Receiver

Overhead Light Fixture - Remote Light Switch

Entertainment System - Indoor Plug-in Receiver

Living Room

2

Coffee Table -

Remote Light Switch

(2) End Table Lamps - (2) Socket Adapters



Entertainment System - Indoor Plug-in Receiver

Christmas Tree - Indoor Plug-in Receiver

3

Window Santa - Indoor Plug-in Receiver

Lighted Poinsettia - Indoor Plug-in Receiver

Basement

4


(4) Overhead Can Fixtures - (4) Socket Adapters

Remote Light Switch

(2) Fluorescent Fixtures - (2)

Indoor Plug-in Receivers

Garage

5


(2) Fluorescent Fixtures - (2) Outdoor Indoor Plug-in

Receivers

Remote Light Switch


Outdoor

6

Foyer - Remote Light Switch

Entry Light - Remote Light Switch

Car Keys - Keychain Remote

Coach Lantern - Remote Light Switch

7

Christmas Lights - Outdoor Indoor Plug-in Receiver

Yard Santa -

Outdoor Indoor Plug-in Receiver

Kitchen

8

Entrance - Remote Light Switch

Coffee Maker -


+

+

+

+

+

+

+

+

Operate a lamp or

appliance by remote control.

For technical support, call us at:

1-800-654-8483, option #4


51140

Home Automation Series

IMPORTANT!

These devices are NOT compatible with devices from other systems.

You must purchase GE remotes and receivers to ensure compatibility.

Outdoor Plug-in Receiver

51141

Socket Adapter

51142

Wall Switch

51143

ON

ON

OFF

OFF

Keychain Remote

51144

Remote Light Switch

51147

Motion Sensor

& Plug-in Receiver

56765

INCLUDED!

INCLUDED!

product line

GE JASRM24911 User Guide

GE JASRM24911 Manual

GE JASRM24911 manual content summary: