GE JDS28DFWW Quick Specs

GE JDS28DFWW Manual

GE JDS28DFWW manual content summary:

  • GE JDS28DFWW | Quick Specs - Page 1
    consult installation instructions for current upsides to 1-1/4" thick to provide countertop support 27-1/2 23-3/16 30" Min. GE Answer2C-7e/8n"ter® service, 800.626.2000. To Front Surface of Countertop * ADA qualified based on Uniform Federal Accessory Backguard JXS32 All GE ranges
  • GE JDS28DFWW | Quick Specs - Page 2
    JDS28DF GE® 30" Drop-In Electric Range with Standard Clean Oven Features and Benefits • Coil Heating Elements - Provide even heat and easy easy LIGHT • Chrome Drip Bowls - Contain spills and remove for easy cleaning • Model JDS28DFWW - White on white JDS28DF Specification Created 6/13 320835
  • 1
  • 2

Dimensions and Installation Information
Listed by
Underwriters
Laboratories
JDS28DF
GE
®
30" Drop-In Electric Range with Standard Clean Oven
For answers to your Monogram
®
or GE
®
appliance
questions, visit our website at geappliances.com
or call GE Answer Center
®
service, 800.626.2000.
Specification Created 6/13
320835
IMPORTANT:
30" DROP-IN RANGES ARE DESIGNED TO HANG FROM THE COUNTERTOP.
IT DOES NOT REST ON THE FLOOR. FOR INSTALLATION ALTERNATIVES, REFER TO
INSTALLATION INSTRUCTIONS.
Note:
This appliance has been approved for 0” spacing to adjacent surfaces
above the cooktop. However, a 6” minimum spacing to surfaces less than 15”
above the cooktop and adjacent cabinet is recommended to reduce exposure
to steam, grease splatter and heat.
Optional Kits For Drop-In Electric Ranges
(Available At Additional Cost)
Installation information:
Before installing, consult
installation instructions for current dimensional data
and additional requirements.
2-7/8"
To Front Surface
of Countertop
27
20-5/8" Door
Clearance
From Front
Surface of
Countertop
24
31-1/4
30
4
Accessory
Backguard
JXS32
25-3/4*
(excluding handle)
*Total depth from wall to
front of closed oven door
including handle is 28-1/2.
Acceptable Electrical Outlet
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
30" Min.
30" Min.
15" Min.
Recommended
6" Min.
from walls
30
27-1/2
25
23-3/16
If necessary,
build upsides
to 1-1/4" thick
to provide
countertop
support
28-1/2
Accessory Backguards
(Attaches to the back of range
as a backguard when unit is installed
in 30" free-standing cutout)
JXS32SS (Stainless) - 4" High
JXS32BB (Black) - 4" High
Rear Filler Strip
WB07T10680 - Black Filler Strip Assembly
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
ADA qualified based
on Uniform Federal
Accessibility Standards
*
KW Rating
240V
10.8
208V
8.1
Breaker Size
240V
40 Amps
208V
40 Amps
Note:
Check local codes for required breaker size.