GE PK916SRSS Quick Specs
GE PK916SRSS Manual
 |
UPC - 084691223931
View all GE PK916SRSS manuals
Add to My Manuals
Save this manual to your list of manuals |
GE PK916SRSS manual content summary:
- GE PK916SRSS | Quick Specs - Page 1
spec of at least a 194°F temperature rating. For 27" built-in single ovens, if marks, blemishes or the cutout opening is visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until the marks or openings are covered. 10 Electric wall ovens - GE PK916SRSS | Quick Specs - Page 2
CleanDesign and Calrod® electric cooktops. Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models. Cabinets installed have an adhesion adjacent to wall ovens must spec of at least a 194 - GE PK916SRSS | Quick Specs - Page 3
a conventional oven • Self-clean oven-Self-clean allows you to spare yourself from the trouble and effort it takes to scrub the oven interior • Dual interior lighting-Bright interior lights help you check on the progress of your cooking • Model PK916SRSS - Stainless steel Specification Created
-
1 -
2 -
3
 |
 |
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Listed by
Underwriters
Laboratories
KW Rating
240V
3.6
208V
2.7
Breaker Size
240V
20 Amps
208V
20 Amps
Note:
These ovens are
not
approved for stackable or side-by-
side installations.
Note:
Cabinets installed adjacent to wall ovens must have an
adhesion spec of at least a 194°F temperature rating. For 27”
built-in single ovens, if marks, blemishes or the cutout opening
is visible above the installed oven, it may be necessary to add
wood shims under the runners and front trim until the marks or
openings are covered.
Electric wall ovens are not approved
for installation with a plug and receptacle. They must be hard
wired in accordance with installation instructions
.
Note:
Door handle protrudes 3" from door face. Cabinets and
drawers on adjacent 45° and 90° walls should be placed to avoid
interference with the handle.
Installation Information:
Before installing, consult installation
instructions packed with product for current dimensional data.
Access
from
adjacent
cabinet
required
2" x 4"
or equiv.
runners
B MIN.
C MIN.
Conduit 48-1/2" long
32-1/2
D
10
A
Allow 3/4"
for overlap
over all edges
of cutout
Locate
junction box
either 5" MIN.
below cutout
floor or 44"
MIN. above
cutout floor
Minimum
cutout location
from floor
(Minimum 15-5/8"
from floor when
installed below built-in
microwave oven)
E
G
F
20
Dimensions and Installation Information (in inches)
Cabinet
27"
A – Cabinet width required
27" min.
B – Minimum cabinet depth
23-5/8"
C – Opening width
25" min. - 25-1/4" max
D – Opening height
27-5/8" min. - 28-1/8" max.
Oven
E – Overall depth*
23-5/8"
F – Overall height with trim
29-7/8" - 30-3/4"
Overall height without trim
29"
G – Overall width
26-5/8"
*Depth including door handle is approximately 26-7/10" min. to
26-8/10" max.
C
L
Suitable
bracing
to support
runners
18"
Over centerline
of cabinet
(must support 275 lbs.)
2" x
4" or
equivalent
runners
220365
PK916SR
GE Profile
™
27" Built-In Single Convection Wall Oven
Specification Created 5/10