GE PVW7301EJES Quick Specs

GE PVW7301EJES Manual

Get GE PVW7301EJES PDF manuals and user guides View all GE PVW7301EJES manuals
Add to My Manuals
Save this manual to your list of manuals

GE PVW7301EJES manual content summary:

  • GE PVW7301EJES | Quick Specs - Page 1
    hood. This hood may be installed onto a wall and veFnoterdatontshwe oeurtsdotoorsy, ooruitrcManobneoingsrtaallmed,® GE Profile hood to the ceiling. service, 800.626.2000. NOTE: Installation height should be measured from the cooking surface to the lowest part of the hood. This hood may be installed
  • GE PVW7301EJES | Quick Specs - Page 2
    PVW7301SJ/EJ GE Profile™ Series 30" Wall-Mount Glass Canopy Chimney Hood Features and Benefits 350-CFM venting system with boost - Effectively remove smoke, grease, your ventilation lighting and fan speed from anywhere in the kitchen Model PVW7301SJSS - Stainless steel Model PVW7301EJES - Slate
  • 1
  • 2
Listed by
Underwriters
Laboratories
Specification Revised 4/15
For answers to your Monogram,
®
GE Profile
™
or GE
®
appliance questions, visit our website
at geappliances.com or call GE Answer Center
®
service, 800.626.2000.
10-3/16"
1-3/4"
11-3/4"
18-1/2"
30"
*Height
to
Ceiling
30" Models Require a 30"-Wide Opening
24" Min
36" Max
INSTALLATION INFORMATION:
Before installing, consult Use & Care/installation instructions
packed with product for current dimensional data.
OPTIONAL ACCESSORIES
JXDC71SS/ES-10(ft.) Ceiling Duct Cover Kit
Max ceiling height installation with kit - 10'-0"
JXRC70-Remote Control
JXCF71-Charcoal Filter
(needed if used in recirculation mode)
Amp Rating
120V
5.3
PVW7301SJ/EJ
GE Profile
™
Series 30" Wall-Mount Glass Canopy Chimney Hood
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
30" Models Require a 30"-Wide Opening
*The supplied duct cover fits 7'-5" to 9'-3" ceiling
heights (10" with optional high ceiling kit JXDC71)
The vent hood must be installed 24" min. and 36" max. above the cooking surface.
The hood installation height above the cooking surface depends upon ceiling height.
The telescopic duct cover conceals the ductwork running from the top of the hood to
the ceiling.
NOTE:
Installation height should be measured from the cooking surface to the
lowest part of the hood. This hood may be installed onto a wall and vented to the
outdoors, or it can be installed for recirculating operation. Parts for recirculating
operation are supplied with the hood. However, when installed for recirculating
operation, the optional charcoal filter JXCF71 will need to be purchased separately.