GE UVB30SKSS Quick Specs

UVB30SK

Universal 30" Telescopic Downdraft System

Specification Created 11/15

For answers to your Monogram, GE Profile

™

Series

or GE

®

Series appliance questions, visit our website

at geappliances.com or call GE Answer Center

service, 800.626.2000.

NOTE:

Telescopic downdraft vents are not

recommended to be installed with cooktops

that are flush mounted.

Approved for use with the following Monogram,

GE Profile

™

Series

and GE

®

Series cooktops–30"

electric models, 30" gas sealed-burner models

and 30" induction models.

NOT APPROVED FOR USE WITH STANDARD

BURNER GAS COOKTOPS.

NOTE:

The cooktop must be at least 26" deep with

a flat surface area of 23-1/2" or more, front to back.

In addition, other clearances to the front edge of the

countertop must be considered.

NOTE:

Dimensions shown are for reference only.

Before cutting out countertop, refer to instructions

packed with downdraft and cooktop.

NOTE:

Installation on cabinets/countertops against

the wall will not be possible in most applications.

Against the wall installations are limited to

dimension requirements. Refer to installation

instructions packed with product for further details.

JXRB67 INDOOR REMOTE ACCESSORY.

Optional accessory may be ordered for installation

of motor and blower assembly in an indoor remote

location.

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

23-5/8"

28-5/16"

30"

2"

1-1/2"

2-1/4"

9-1/2"

8-1/2"

Lift

32-3/8"

Locate the Gas or Electrical

n

Connection Only Within the

Shaded Area

DO NOT Locate

Gas or Electrical

Connections within

this Area

29-1/2"

12"

Electrical

Outlet 12"

Above

Cabinet

Floor

2-1/8"*

8-1/2"

30"

*Minimum distance required between

the back edge of the cooktop

and the back of the cutout

in the countertop

GE UVB30SKSS Quick Specs

GE UVB30SKSS Manual

GE UVB30SKSS manual content summary: