Gigabyte G1.Sniper Z5S User Manual

Gigabyte G1.Sniper Z5S Manual

Get Gigabyte G1.Sniper Z5S PDF manuals and user guides View all Gigabyte G1.Sniper Z5S manuals
Add to My Manuals
Save this manual to your list of manuals

Gigabyte G1.Sniper Z5S manual content summary:

  • Gigabyte G1.Sniper Z5S | User Manual - Page 1
    G1.Sniper Z5S User's Manual Rev. 1101 12ME-G1SNZ5S-1101R
  • Gigabyte G1.Sniper Z5S | User Manual - Page 2
    Motherboard G1.Sniper Z5S Dec. 26, 2013 Motherboard G1.Sniper Z5S Dec. 26, 2013
  • Gigabyte G1.Sniper Z5S | User Manual - Page 3
    set-up of the product, read the Quick Installation Guide included with the product. „„ For detailed product information, carefully read the User's Manual. For product-related information, check on our website at: http://www.gigabyte.com Identifying Your Motherboard Revision The revision number on
  • Gigabyte G1.Sniper Z5S | User Manual - Page 4
    Table of Contents Box Contents...6 Optional Items...6 G1.Sniper Z5S Motherboard Layout 7 G1.Sniper Z5S Motherboard Block Diagram 8 Chapter 1 Hardware Installation 9 1-1 Installation Precautions 9 1-2 Product Specifications 10 1-3 Installing the CPU and CPU Cooler 13 1-3-1 Installing the CPU
  • Gigabyte G1.Sniper Z5S | User Manual - Page 5
    Configuring 2/4/5.1/7.1-Channel Audio 92 6-2-2 Configuring S/PDIF Out 94 6-2-3 Configuring Microphone Recording 95 6-2-4 Using the Sound Recorder 97 6-3 Troubleshooting 98 6-3-1 Frequently Asked Questions 98 6-3-2 Troubleshooting Procedure 99 Regulatory Statements 101 Contact Us...103 - 5 -
  • Gigabyte G1.Sniper Z5S | User Manual - Page 6
    Box Contents 55 G1.Sniper Z5S motherboard 55 Motherboard driver disk 55 User's Manual 55 Quick Installation Guide 55 Four SATA cables 55 I/O Shield 55 One 2-Way SLI bridge connector The box contents above are for reference only and the actual items shall
  • Gigabyte G1.Sniper Z5S | User Manual - Page 7
    DVI_VGA CPU_FAN LGA1150 USB_DAC HDMI R_USB30 USB30_LAN AUDIO Qualcomm® Atheros Killer E2201 LAN SYS_FAN1 PCIEX1_1 GAIN PCIEX16 PCIEX1_2 G1.Sniper Z5S PCIEX1_3 PCIEX8 CODEC PCIEX1_4 BAT PCIEX4 F_AUDIO SPDIF_O SYS_FAN3 F_USB1 SYS_FAN2 F_USB2 B_BIOS M_BIOS ATX DDR3_4 DDR3_2 DDR3_3
  • Gigabyte G1.Sniper Z5S | User Manual - Page 8
    1 PCI Express x16 2 PCI Express x8 1 PCI Express x8 2 PCI Express x4 DMI 2.0 FDI G1.Sniper Z5S Motherboard Block Diagram PCIe CLK (100 MHz) or or or + x16 x16 x16 Switch LGA1150 CPU CPU CLK+/- (100 MHz) DDR3 1600/1333 MHz Dual
  • Gigabyte G1.Sniper Z5S | User Manual - Page 9
    electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: •• Prior to installation, make sure the are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician.
  • Gigabyte G1.Sniper Z5S | User Manual - Page 10
    ™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium® processors/ Intel® Celeron® processors in the LGA1150 package (Go to GIGABYTE's website for the latest CPU support list.) Š L3 cache varies with CPU Chipset Š Intel® Z87 Express Chipset Memory Onboard Graphics Audio Š 4 x 1.5V DDR3
  • Gigabyte G1.Sniper Z5S | User Manual - Page 11
    Internal Š Connectors Š Š Š Š Š Š Š Š Š Š Š Š Back Panel Š Connectors Š Š Š Š Š Š Š Š Š I/O Controller Š Hardware Š Monitor Š Š Š Š Š Chipset: - 6 x SATA 6Gb/s connectors - Support for RAID 0, RAID 1, RAID 5, and RAID 10 Chipset: - 6 x USB 3.0/2.0 ports (4 ports on
  • Gigabyte G1.Sniper Z5S | User Manual - Page 12
    changes to the product specifications and product-related information without prior notice. * Please visit the Support & Downloads\Utility page on GIGABYTE's website to check the supported operating system(s) for the software listed in the "Unique Features" and "Bundled Software" columns. Hardware
  • Gigabyte G1.Sniper Z5S | User Manual - Page 13
    and CPU Cooler Read the following guidelines before you begin to install the CPU: •• Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) •• Always turn off the computer and unplug the power cord from the power outlet before installing the CPU
  • Gigabyte G1.Sniper Z5S | User Manual - Page 14
    B. Follow the steps below to correctly install the CPU into the motherboard CPU socket. • Before installing the CPU, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the CPU. • To protect the socket contacts, do not remove the protective plastic
  • Gigabyte G1.Sniper Z5S | User Manual - Page 15
    " when pushing down each push pin. Check that the Male and Female push pins are joined closely. (Refer to your CPU cooler installation manual for instructions on installing the cooler.) Step 5: After the installation, check the back of the motherboard. If the push pin is inserted as the picture
  • Gigabyte G1.Sniper Z5S | User Manual - Page 16
    the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) •• Always turn off the computer and unplug the power cord from the power outlet before installing the memory to
  • Gigabyte G1.Sniper Z5S | User Manual - Page 17
    1-4-2 Installing a Memory Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs. Be sure to install DDR3 DIMMs on this motherboard
  • Gigabyte G1.Sniper Z5S | User Manual - Page 18
    Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: •• Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. •• Always turn off the computer and unplug the power cord from the power
  • Gigabyte G1.Sniper Z5S | User Manual - Page 19
    System Requirements -- Windows 8/7 operating system -- A CrossFire/SLI-supported motherboard with two PCI Express x16 slots and correct driver -- -- A power supply with sufficient power is recommended (Refer to the manual of your graphics cards for the power requirement) B. Connecting the Graphics
  • Gigabyte G1.Sniper Z5S | User Manual - Page 20
    or use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc. USB 3.0/2.0 Port The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification. Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB
  • Gigabyte G1.Sniper Z5S | User Manual - Page 21
    etc. Line Out Jack (Green) The default line out jack. This jack supports audio amplifying function. For better sound quality, it is recommended that you connect be connected to the default Mic in jack. Refer to the instructions on setting up a 2/4/5.1/7.1-channel audio configuration in Chapter 6,
  • Gigabyte G1.Sniper Z5S | User Manual - Page 22
    1-8 Changing the Operational Amplifier Step 1: Use an IC extractor to carefully grip the IC's sides and extract it from the socket. Step 2: Align the notch on your OP chip with the notch on the socket and gently press the chip into the socket until seated. For purchasing the IC extractor and OP Chip
  • Gigabyte G1.Sniper Z5S | User Manual - Page 23
    1-9 Internal Connectors 1 3 2 4 11 9 5 13 7 8 4 4 12 14 6 10 1) ATX_12V_2X4 2) ATX 3) CPU_FAN 4) SYS_FAN1/2/3 5) SATA3 0/1/2/3/4/5 6) F_PANEL 7) F_AUDIO 8) SPDIF_O 9) GAIN 10) COMA 11) F_USB30 12) F_USB1/F_USB2 13) CLR_CMOS 14) BAT Read the following guidelines before connecting external
  • Gigabyte G1.Sniper Z5S | User Manual - Page 24
    1/2) ATX_12V_2X4/ATX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all
  • Gigabyte G1.Sniper Z5S | User Manual - Page 25
    with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The Intel® Z87 Chipset supports RAID 0, RAID 1, RAID 5, and RAID 10. Refer to Chapter 3, "Configuring SATA Hard Drive(s)," for instructions on configuring a RAID array. SATA3 5 4 7 7 G.QBOFM 3 2 G.QBOFM
  • Gigabyte G1.Sniper Z5S | User Manual - Page 26
    speaker on the chassis front panel. The system reports system startup status by issuing a beep code. One single short beep will be heard if no problem is detected at system startup. •• HD (Hard Drive Activity LED, Blue): Connects to the hard drive activity LED on the chassis front panel. The LED
  • Gigabyte G1.Sniper Z5S | User Manual - Page 27
    front panel audio module, refer to the instructions on how to activate AC'97 functionality to mute the back panel audio (only supported when using an HD front panel audio information about connecting the S/PDIF digital audio cable, carefully read the manual for your expan- _ S sion card. S_ _ B
  • Gigabyte G1.Sniper Z5S | User Manual - Page 28
    F_US S U __ 3 9) GAIN (Audio Gain Control Switch) This switch allows for audio gain control for the line-out jack on the back panel. Please make sure all of the dips are set in the same position and are set according to your headphone specification (actual effects may vary by the device being
  • Gigabyte G1.Sniper Z5S | User Manual - Page 29
    F_USB30 11) F_USB30 (USB 3.0/2.0 Header) F_ U F_ The header conforms to USB 3.0/2.0 specification and can provide two USB ports. For purchasing the optional 3.5" front panel that provides two USB 3.0/2.0 ports, please contact the local dealer. Pin No. Definition Pin No. Definition 1 VBUS 11
  • Gigabyte G1.Sniper Z5S | User Manual - Page 30
    outlet before clearing the CMOS values. •• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations). 14) BAT (Battery) The battery provides power to keep the
  • Gigabyte G1.Sniper Z5S | User Manual - Page 31
    on. To upgrade the BIOS, use either the GIGABYTE Q-Flash or @BIOS utility. •• Q-Flash allows the from the Internet and updates the BIOS. For instructions on using the Q-Flash and @BIOS utilities, is potentially risky, if you do not encounter problems using the current version of BIOS, it is
  • Gigabyte G1.Sniper Z5S | User Manual - Page 32
    2-1 Startup Screen The following startup Logo screen will appear when the computer boots. Function Keys Function Keys: : BIOS SETUP\Q-FLASH Press the key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup. : SYSTEM INFORMATION Press the key to display your
  • Gigabyte G1.Sniper Z5S | User Manual - Page 33
    2-2 The Main Menu A. Dashboard Mode (Default) Differing from traditional UEFI interface, the Dashboard Mode provides a fancy and user-friendly BIOS environment where users can easily point and click through various settings and make adjustments for optimum performance. In Dashboard Mode, you can use
  • Gigabyte G1.Sniper Z5S | User Manual - Page 34
    Classic Setup Function Keys Move the selection bar to select a setup menu Move the selection bar to select an configuration item on a menu Execute command or enter a menu / Increase the numeric value or make changes / Decrease the numeric value
  • Gigabyte G1.Sniper Z5S | User Manual - Page 35
    2-3 M.I.T. Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is
  • Gigabyte G1.Sniper Z5S | User Manual - Page 36
    the CPU specifications. && Host/PCIe Clock Frequency (Note) Allows you to manually set the host clock frequency (which controls CPU, PCIe, and memory frequencies item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique features, please visit Intel's
  • Gigabyte G1.Sniper Z5S | User Manual - Page 37
    ® CPU Turbo Boost technology. Auto lets the BIOS automatically configure this setting. (Default: Auto) (Note) This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique features, please visit Intel's website. - 37 - BIOS Setup
  • Gigabyte G1.Sniper Z5S | User Manual - Page 38
    BIOS automatically configure this setting. (Default: Auto) && C3 State Support (Note) Allows you to determine whether to let the CPU enter C3 the BIOS automatically configure this setting. (Default: Auto) && C6/C7 State Support (Note) Allows you to determine whether to let the CPU enter C6/C7 mode
  • Gigabyte G1.Sniper Z5S | User Manual - Page 39
    . Disable Fast Boot Detect and train memory at every single boot. (Note) This item is present only when you install a CPU and a memory module that support this feature. - 39 - BIOS Setup
  • Gigabyte G1.Sniper Z5S | User Manual - Page 40
    memory timing settings for each channel of memory. The respective timing setting screens are configurable only when Memory Timing Mode is set to Manual or Advanced Manual. Note: Your system may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please reset
  • Gigabyte G1.Sniper Z5S | User Manual - Page 41
    `` Advanced Voltage Settings The sub-menus allow you to set CPU, chipset and memory voltages. - 41 - BIOS Setup
  • Gigabyte G1.Sniper Z5S | User Manual - Page 42
    `` PC Health Status && Reset Case Open Status Disabled Keeps or clears the record of previous chassis intrusion status. (Default) Enabled Clears the record of previous chassis intrusion status and the Case Open field will show "No" at next boot. && Case Open Displays the detection status of
  • Gigabyte G1.Sniper Z5S | User Manual - Page 43
    CPU temperature. You can adjust the fan speed with EasyTune based on your system requirements. (Default) Silent Allows the fan to run at slow speeds. Manual Allows you to control the fan speed under the Slope PWM item. Full Speed Allows the fan to run at full speeds. && Fan Speed Percentage
  • Gigabyte G1.Sniper Z5S | User Manual - Page 44
    Gen 1, Gen 2, or Gen 3. Actual operation mode is subject to the hardware specification of each slot. For example, the PCI Express x1 slots can support up to Gen 2 mode only. Auto lets the BIOS automatically configure this setting. (Default: Auto) && 3DMark01 Boost Allows you to determine whether to
  • Gigabyte G1.Sniper Z5S | User Manual - Page 45
    This section provides information on your motherboard model and BIOS version. You can also select the default language used by the BIOS and manually set the system time. && System Language Selects the default language used by the BIOS. && System Date Sets the system date. The date format
  • Gigabyte G1.Sniper Z5S | User Manual - Page 46
    GPT partitioning, select the device prefixed with "UEFI:" string. Or if you want to install an operating system that supports GPT partitioning such as Windows 7 64-bit, select the optical drive that contains the Windows 7 64-bit installation disk and is prefixed with "UEFI:" string. &&
  • Gigabyte G1.Sniper Z5S | User Manual - Page 47
    Logo at system startup. Disabled skips the GIGABYTE Logo when the system starts up. (Default: Enabled) && Fast Boot Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup speed. (Default: Disabled) && VGA Support Allows you to select which type of
  • Gigabyte G1.Sniper Z5S | User Manual - Page 48
    network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. (Default: Disabled) (Note) This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique features, please visit Intel's website
  • Gigabyte G1.Sniper Z5S | User Manual - Page 49
    . This item is configurable only when Network stack is enabled. && Ipv6 PXE Support Enables or disables IPv6 PXE Support. This item is configurable only when Network stack is enabled. && Administrator Password Allows you to configure an administrator password. Press on this item, type
  • Gigabyte G1.Sniper Z5S | User Manual - Page 50
    in OS. Smart Auto This mode is available only when the BIOS supports the xHCI controller in the pre-boot environment. This mode is similar to Auto EHCI. Note: This is the recommended mode when BIOS has xHCI preboot support. (Default) Auto BIOS routes the sharable ports to EHCI controller.
  • Gigabyte G1.Sniper Z5S | User Manual - Page 51
    EHCI controller before booting to OS, and also provides you with options to manually rout each USB 3.0/2.0 port to xHCI or EHCI. && Audio Controller Enables disables Intel® Rapid Start Technology. (Default: Disabled) && Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default:
  • Gigabyte G1.Sniper Z5S | User Manual - Page 52
    Enabled) && Hot plug Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && External SATA Enables or disables support for external SATA devices. (Default: Disabled) `` Super IO Configuration This section provides information on the super I/O chip and allows you to
  • Gigabyte G1.Sniper Z5S | User Manual - Page 53
    2-7 Power Management && Power Loading Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing it to shutdown or fail. If this occurs, please set to Enabled. Auto lets the BIOS automatically configur this setting.(Default:Auto) && Resume by Alarm
  • Gigabyte G1.Sniper Z5S | User Manual - Page 54
    && AC BACK Determines the state of the system after the return of power from an AC power loss. Always Off The system stays off upon the return of the AC power. (Default) Always On The system is turned on upon the return of the AC power. Memory The system returns to its last known awake
  • Gigabyte G1.Sniper Z5S | User Manual - Page 55
    2-8 Save & Exit && Save & Exit Setup Press on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press to return to the BIOS Setup Main Menu. && Exit Without Saving Press on this item and select Yes. This exits the BIOS
  • Gigabyte G1.Sniper Z5S | User Manual - Page 56
    BIOS Setup - 56 -
  • Gigabyte G1.Sniper Z5S | User Manual - Page 57
    Chapter 3 Configuring SATA Hard Drive(s) RAID Levels RAID 0 Minimum Number of Hard ≥2 Drives Array Capacity Number of hard drives * Size of the smallest drive Fault Tolerance No RAID 1 RAID 5 2 ≥3 Size of the smallest drive Yes (Number of hard drives -1) * Size of the smallest drive
  • Gigabyte G1.Sniper Z5S | User Manual - Page 58
    B. Configuring SATA controller mode in BIOS Setup Make sure to configure the SATA controller mode correctly in system BIOS Setup. Step 1: Turn on your computer and press to enter BIOS Setup during the POST (Power-On Self-Test). Go to Peripherals\SATA Configuration, make sure Integrated SATA
  • Gigabyte G1.Sniper Z5S | User Manual - Page 59
    Windows 8 64-bit installation only. Step 1: In BIOS Setup, go to BIOS Features and set Windows 8 Features to Windows 8 and CSM Support to Never (Figure 2). Save the changes and exit BIOS Setup. Figure 2 Step 2: After the system reboot, enter BIOS Setup again. Then enter the Peripherals\Intel
  • Gigabyte G1.Sniper Z5S | User Manual - Page 60
    with 1~16 letters (letters cannot be special characters) under the Name item and press . Then, select a RAID level (Figure 4). RAID levels supported include RAID 0, RAID 1, RAID 10, and RAID 5 (the selections available depend on the number of the hard drives being installed). Next, use the
  • Gigabyte G1.Sniper Z5S | User Manual - Page 61
    Step 5: After setting the capacity, move to Create Volume and press to begin. (Figure 6) Figure 6 After completing, you'll be brought back to the Intel(R) Rapid Storage Technology screen. Under RAID Volumes you can see the new RAID volume. To see more detailed information, press on
  • Gigabyte G1.Sniper Z5S | User Manual - Page 62
    Delete RAID Volume To delete a RAID array, press on the volume to be deleted on the Intel(R) Rapid Storage Technology screen. After entering the RAID VOLUME INFO screen, press on Delete to enter the Delete screen. Press on Yes (Figure 8). Figure 8 Configuring SATA Hard Drive
  • Gigabyte G1.Sniper Z5S | User Manual - Page 63
    C-2. Configuring Legacy RAID ROM Enter the Intel® legacy RAID BIOS setup utility to configure a RAID array. Skip this step and proceed with the installation of Windows operating system for a non-RAID configuration. Step 1: After the POST memory test begins and before the operating system boot
  • Gigabyte G1.Sniper Z5S | User Manual - Page 64
    with 1~16 letters (letters cannot be special characters) under the Name item and press . Then, select a RAID level (Figure 11). RAID levels supported include RAID 0, RAID 1, RAID 10, and RAID 5 (the selections available depend on the number of the hard drives being installed). Press
  • Gigabyte G1.Sniper Z5S | User Manual - Page 65
    Step 5: Enter the array capacity and press . Finally press on the Create Volume item to begin creating the RAID array. When prompted to confirm whether to create this volume, press to confirm or to cancel (Figure 13). Intel(R) Rapid Storage Technology - Option ROM - 12.7.0.
  • Gigabyte G1.Sniper Z5S | User Manual - Page 66
    Recovery Volume Options Intel® Rapid Recover Technology provides data protection by allowing users to easily restore data and system operation using a designated recovery drive. With the Rapid Recovery Technology, which employs RAID 1 functionality, users can copy the data from the master drive to
  • Gigabyte G1.Sniper Z5S | User Manual - Page 67
    On Request allows users to update data from the master drive to the recovery drive manually using the Intel® Rapid Storage Technology utility in the operating system. On Request also allows the Recovery Volume and follow the onscreen instructions to complete. - 67 - Configuring SATA Hard Drive(s)
  • Gigabyte G1.Sniper Z5S | User Manual - Page 68
    are unable to run the Intel® IRST utility due to an application error or operating system issue, you will need to remove acceleration or manually enable synchronization (Maximized mode only) using this option in the RAID ROM utility. Steps: Select Acceleration Options in MAIN MENU and press
  • Gigabyte G1.Sniper Z5S | User Manual - Page 69
    3-2 Installing the SATA RAID/AHCI Driver and Operating System With the correct BIOS settings, you are ready to install Windows 8/7. A. Installing Windows 8/7 As Windows 7 already include Intel® SATA RAID/AHCI driver, you do not need to install separate RAID/AHCI driver during the Windows
  • Gigabyte G1.Sniper Z5S | User Manual - Page 70
    automatic rebuild will be performed after you enter the operating system. If you do not enable automatic rebuild on this stage, you have to manually rebuild the array in the operating system (see the next page for more details). Intel(R) Rapid Storage Technology - Option ROM - 12.7.0.1936 Copyright
  • Gigabyte G1.Sniper Z5S | User Manual - Page 71
    •• Performing the Rebuild in the Operating System While in the operating system, make sure the chipset driver has been installed from the motherboard driver disk. Then launch the Intel® Rapid Storage Technology utility from the desktop. Step 1: Go to the Manage menu and click Rebuild to another
  • Gigabyte G1.Sniper Z5S | User Manual - Page 72
    VOLUMES OPTIONS menu, select Enable Only Recovery Disk to show the recovery drive in the operating system. Follow the on-screen instructions to complete and exit the RAID Configuration Utility. Intel(R) Rapid Storage Technology - Option ROM - 12.7.0.1936 Copyright(C) 2003-13 Intel Corporation
  • Gigabyte G1.Sniper Z5S | User Manual - Page 73
    Chapter 4 Drivers Installation • Before installing the drivers, first install the operating system. (The following instructions use Windows 8 as the example operating system.) • After installing the operating system, insert the motherboard driver disk into your optical drive. Click on the message "
  • Gigabyte G1.Sniper Z5S | User Manual - Page 74
    4-2 Application Software This page displays the apps that GIGABYTE develops and some free software. You can select the apps you want and the drivers on the driver disk. The Contact page provides contact information of the GIGABYTE Taiwan headquarter. You can click the URL on this page to link to the
  • Gigabyte G1.Sniper Z5S | User Manual - Page 75
    BIOS chip. What is DualBIOS™? Motherboards that support DualBIOS have two BIOS onboard, a main BIOS system safety, users cannot update the backup BIOS manually. What is Q-Flash™? With Q-Flash you Flash Utility A. Before You Begin 1. From GIGABYTE's website, download the latest compressed BIOS
  • Gigabyte G1.Sniper Z5S | User Manual - Page 76
    to Drive option allows you to save the current BIOS file. •• Q-Flash only supports USB flash drive or hard drives using FAT32/16/12 file system. •• If the Flash. 2. Select USB Flash Drive. Q-Flash Utility v1.05 Model Name : G1.Sniper Z5S BIOS Version : D1 BIOS Date : 11/19/2013 Flash Type/Size :
  • Gigabyte G1.Sniper Z5S | User Manual - Page 77
    Step 4: During the POST, press to enter BIOS Setup. Select Load Optimized Defaults on the Save & Exit screen and press to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update, so we recommend that you reload BIOS defaults. Select Yes to load BIOS
  • Gigabyte G1.Sniper Z5S | User Manual - Page 78
    @BIOS server site, please manually download the BIOS update file from GIGABYTE's website and follow the instructions in "Update the BIOS without screen. Click Backup current image to save the currently used boot-up logo. Supported image formats include jpg, bmp, and gif. C. After Updating the BIOS
  • Gigabyte G1.Sniper Z5S | User Manual - Page 79
    On the Autorun screen, go to Application Software\Install GIGABYTE Utilities to install GIGABYTE App Center and the selected apps. Restart your computer after in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications. -
  • Gigabyte G1.Sniper Z5S | User Manual - Page 80
    5-2-1 EasyTune GIGABYTE's EasyTune is a simple and easy-to-use interface that allows model. Grayed-out area(s) indicates that the item is not configurable or the function is not supported. Incorrectly doing overclock/overvoltage may result in damage to the hardware components such as CPU, chipset
  • Gigabyte G1.Sniper Z5S | User Manual - Page 81
    5-2-2 EZ Setup The GIGABYTE EZ Setup utility includes the following 'EZ' setups applications switch the operating mode for your hard drive even after it's been installed with an operating system. Supported operating modes include IDE, AHCI, and RAID. You can select a disk mode and restart your
  • Gigabyte G1.Sniper Z5S | User Manual - Page 82
    EZ Smart Response A. System Requirements 1. An Intel® Chipset-based motherboard supporting this feature 2. Intel® Core series processor 3. Intel® SATA controller set to RAID mode 4. Intel® Rapid Storage Technology utility installed (Note 1) 5. A conventional SATA disk and an
  • Gigabyte G1.Sniper Z5S | User Manual - Page 83
    1. Intel® Rapid Start Technology enabled in BIOS Setup 2. An SSD with size larger than the total system memory 3. Windows 7 with SP1/Windows 8 4. AHCI/RAID mode supported (please note if the SSD has been assigned as a member of a RAID array, it cannot be used to set up and Intel® Rapid Start store
  • Gigabyte G1.Sniper Z5S | User Manual - Page 84
    EZ Smart Connect A. System Requirements 1. Intel® Smart Connect Technology enabled in BIOS Setup 2. Windows 7 with SP1/Windows 8 3. Intel® Smart Connect Technology utility installed 4. Properly-working network connection 5. Programs added to the White List must be turned on (Note) B. Using EZ Smart
  • Gigabyte G1.Sniper Z5S | User Manual - Page 85
    XHD With GIGABYTE XHD (Note 1), users can quickly configure a RAID-ready system for RAID 0 or RAID 0 or Create RAID 1 based on your need. (Note 2) (Note 1) The XHD utility only supports the SATA connectors controlled by the Intel® Chipset. (Note 2) Except for the operating system drive, all data
  • Gigabyte G1.Sniper Z5S | User Manual - Page 86
    5-2-3 USB Blocker GIGABYTE USB Blocker provides you with an easy-to-use interface that allows you to block certain USB device types on your PC. Devices classes that
  • Gigabyte G1.Sniper Z5S | User Manual - Page 87
    5-2-4 Smart TimeLock GIGABYTE Smart TimeLock allows users to effectively manage computer usage time with simple rules and options. The Smart TimeLock Interface Using Smart TimeLock Click the lock
  • Gigabyte G1.Sniper Z5S | User Manual - Page 88
    recover your system from the backup image •• Smart Recovery 2 only supports NTFS file system. •• You need to select the destination partition in the backup and enter the user name and password. Follow the on-screen instructions to complete. Recovering a file: Click the File Recovery button on the
  • Gigabyte G1.Sniper Z5S | User Manual - Page 89
    to proceed with the restore immediately or later. Once you respond "Yes" the system will restart to the Windows recovery environment. Follow the onscreen instructions to restore your system. All of your files and programs will be deleted and replaced with those on the selected backup. If needed, be
  • Gigabyte G1.Sniper Z5S | User Manual - Page 90
    5-2-6 Fast Boot Through the simple GIGABYTE Fast Boot (Note 1) interface, you can enable or change Now button, the system will restart and enter BIOS Setup immediately. (Note 1) This function is supported by Windows 8 only. (Note 2) For more details about this function, refer to Chapter 2, "BIOS Features."
  • Gigabyte G1.Sniper Z5S | User Manual - Page 91
    Chapter 6 Appendix 6-1 Qualcomm® Atheros Killer Network Manager The Killer Network Manager allows you to view your network connection status and Internet bandwidth and to configure your network settings. After installing the LAN driver, you can access the Qualcomm® Atheros Killer Network Manager in
  • Gigabyte G1.Sniper Z5S | User Manual - Page 92
    a microphone, connect your microphone to the Mic in jack and manually configure the jack for microphone functionality. •• To configure 4/5.1/7.1-channel audio mute the back panel audio (only supported when using an HD front panel audio module), refer to instructions on the next page. High Definition
  • Gigabyte G1.Sniper Z5S | User Manual - Page 93
    Step 2: Connect an audio device to an audio jack. The The current connected device is dialog box appears. Select the device according to the type of device you connect. Then click OK. Step 3: On the Speakers screen, click the Speaker Configuration tab. In the Speaker Configuration list, select
  • Gigabyte G1.Sniper Z5S | User Manual - Page 94
    6-2-2 Configuring S/PDIF Out The S/PDIF Out jacks can transmit audio signals to an external decoder for decoding to get the best audio quality. 1. Connecting a S/PDIF Out Cable: Connect a S/PDIF coaxial cable or a S/PDIF optical cable (either one) to an external decoder for transmitting the S/PDIF
  • Gigabyte G1.Sniper Z5S | User Manual - Page 95
    6-2-3 Configuring Microphone Recording Step 1: Switch to Windows desktop mode. The HD Audio Manager icon will appear in the notification area. Double-click the icon to access the HD Audio Manager. Step 2: Connect your microphone to the Mic in jack (pink) on the back panel or the Mic in jack (pink)
  • Gigabyte G1.Sniper Z5S | User Manual - Page 96
    Step 5: To open the Sounder Recorder, move the mouse cursor to the bottom left corner of the screen, click the Start icon to switch to the Start screen (or press the Windows button on the keyboard). Right-click on the screen and click the All apps icon on the bottom right corner of the screen to
  • Gigabyte G1.Sniper Z5S | User Manual - Page 97
    . Be sure to save the recorded audio file upon completion. B. Playing the Recorded Sound You can play your recording in a digital media player program that supports your audio file format. - 97 - Appendix
  • Gigabyte G1.Sniper Z5S | User Manual - Page 98
    6-3 Troubleshooting 6-3-1 Frequently Asked Questions To read more FAQs for your motherboard, please go to the Support & Downloads\FAQ page on GIGABYTE's If your board doesn't have this jumper/button, refer to the instructions on the motherboard battery in Chapter 1. You can temporarily remove the
  • Gigabyte G1.Sniper Z5S | User Manual - Page 99
    If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. START Turn off memory slot. No Correctly insert the memory into the memory socket. Yes The problem is verified and solved. Insert the graphics card. Connect the ATX main power
  • Gigabyte G1.Sniper Z5S | User Manual - Page 100
    & Exit Setup" to save changes and exit BIOS Setup. The problem is verified and solved. Turn off the computer and connect the hard problem, contact the place of purchase or local dealer for help. Or go to the Support & Downloads\Technical Support page to submit your question. Our customer service
  • Gigabyte G1.Sniper Z5S | User Manual - Page 101
    product. Restriction of Hazardous Substances (RoHS) Directive Statement GIGABYTE products have not intended to add and safe from office, your household waste disposal service or where you purchased the Customer Care number listed in your product's user's manual and we will be glad to help you with
  • Gigabyte G1.Sniper Z5S | User Manual - Page 102
    . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Gigabyte G1.Sniper Z5S | User Manual - Page 103
    City 231,Taiwan TEL: +886-2-8912-4000 FAX: +886-2-8912-4005 Tech. and Non-Tech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www.gigabyte.com WEB address (Chinese): http://www.gigabyte.tw •• G.B.T. INC. - U.S.A. TEL: +1-626-854-9338 FAX: +1-626-854-9326 Tech
  • Gigabyte G1.Sniper Z5S | User Manual - Page 104
    , select your language in the language list on the top right corner of the website. • GIGABYTE Global Service System To submit a technical or non-technical (Sales/Marketing) question, please link to: http://ggts.gigabyte.com.tw Then select your language to enter the system. Appendix - 104 -
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
G1.Sniper Z5S
User's Manual
Rev. 1101
12ME-G1SNZ5S-1101R