Gigabyte G211-H4G Manual
Gigabyte G211-H4G Manual
 |
View all Gigabyte G211-H4G manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte G211-H4G manual content summary:
- Gigabyte G211-H4G | Manual - Page 1
EHCI Removal from 6th Generation Intel® Core™ Processor Family Platform Controller Hub (PCH) Technical White Paper September 2015 Revision 1.0 333136-001 - Gigabyte G211-H4G | Manual - Page 2
with your system manufacturer or retailer or learn more at intel.com. Intel technologies may require enabled hardware, specific software, or services activation. Check with your system manufacturer or retailer. The products described may contain design defects or errors known as errata which may - Gigabyte G211-H4G | Manual - Page 3
Contents 1 Introduction ...5 1.1 Planned Chipset Changes 5 1.2 Document Scope 5 1.3 Overview 5 1.4 USB Storage Device Support 5 1.5 xHCI-based Windows* 7 Install Flow 6 2 xHCI USB Operating System Install Solutions 7 2.1 Adding USB 3.0 Drivers to Windows* 7 Install 7 2.2 Boot from - Gigabyte G211-H4G | Manual - Page 4
Revision History Document Number 333136-001 Revision Number 1.0 Initial release. Description § § Revision Date September 2015 4 333136-001 - Gigabyte G211-H4G | Manual - Page 5
with only exposing an xHCI controller for Windows* 8/8.1/10 or Linux* (2.6.38 or later kernel) due to native xHCI support on the OS. However, Windows* 7 does not natively support xHCI controller and relies on manual installation of the Intel's xHCI driver. While there are two types of USB pre-OS - Gigabyte G211-H4G | Manual - Page 6
available in the WinPE kernel. The BIOS is continuing to emulate storage services so that the boot loader is unaware that the physical storage device network (wired or wireless), or some other non-USB interface, then the problem is resolved, and the xHCI controller will now be visible. However, if - Gigabyte G211-H4G | Manual - Page 7
OS will be able to load the xHCI driver, where thereafter full USB functionality will be supported. 3. Instructions to create a Windows* 7 Installation image with xHCI Driver included. 4. Instructions to create a custom Windows* 7 WinPE image with the xHCI driver included - This is described in Boot - Gigabyte G211-H4G | Manual - Page 8
xHCI USB Operating System Install Solutions Note: The Number 5 is in this case for Windows* 7 Ultimate Edition 32 bit. Depending on the Windows* 7 image, the number may be different. Look for the "Image Count" number display by imagex for the right number if there is error. 10. Add USB3.0 drivers to - Gigabyte G211-H4G | Manual - Page 9
xHCI USB Operating System Install Solutions 2.2 14. Burn files as new DVD (Make sure that the DVD is bootable) with favorite burning software (E.g. CDBurnerXP) or create image to a USB Flash Drive (UFD). If using UFD, you can follow section 2.3 steps 2 to create bootable UFD and how to copy files - Gigabyte G211-H4G | Manual - Page 10
xHCI USB Operating System Install Solutions g. Copy the base image (Winpe.wim) into the \Winpe_x86\ISO\sources folder, and rename the file to Boot.wim C:\USB3\x86>copy c:\winpe_x86\winpe.wim c:\winpe_x86\ISO\sources\boot.wim 2. Prepare the UFD a. Open command prompt, use Diskpart to format the UFD
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
333136-001
EHCI Removal from
6
th
Generation Intel
®
Core™
Processor Family Platform
Controller Hub (PCH)
Technical White Paper
September 2015
Revision 1.0