Gigabyte GA-7VM User Manual

Gigabyte GA-7VM Manual

Gigabyte GA-7VM manual content summary:

  • Gigabyte GA-7VM | User Manual - Page 1
    that may cause undesired operation. Representative Person's Name: ERIC LU Signature: Eric Lu Date: Mar. 3, 2000 in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Gigabyte GA-7VM | User Manual - Page 2
    Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) EN 55011 EN55013 EN 55014 EN 55015 EN 55020 EN 55022
  • Gigabyte GA-7VM | User Manual - Page 3
    7VM AMDTM Athlon AGP Motherboard USER'S MANUAL AMDTM Athlon Processor Motherboard REV. 1.1 Fourth Edition R-11-04-000425
  • Gigabyte GA-7VM | User Manual - Page 4
  • Gigabyte GA-7VM | User Manual - Page 5
    is divided into the following sections: 1) Revision List Manual revision information 2) Item Checklist 3) Features Product item list Product information & specification 4) Hardware Setup Instructions on setting up the motherboard 5) Performance & Block Diagram Product Performance & Block
  • Gigabyte GA-7VM | User Manual - Page 6
    Table Of Content Revision History P.1 Item Checklist P.2 Summary of Features P.3 7VM Motherboard Layout P.5 Page index for CPU Speed Setup / Connectors / Panel and Jumper Definition P.6 Performance List P.22 Block diagram P.23 Suspend to RAM Installation P.24 Memory Installation P.
  • Gigabyte GA-7VM | User Manual - Page 7
    1.1 1.1 1.1 1.1 Revision Note Initial release of the 7VM motherboard user's manual. Second release of the 7VM motherboard user's manual. Third release of the 7VM motherboard user's manual. Fourth release of the 7VM motherboard user's manual. Date Mar. 2000 Mar. 2000 Mar. 2000 Apr. 2000 The author
  • Gigabyte GA-7VM | User Manual - Page 8
    Item Checklist ;The 7VM Motherboard ;Cable for IDE / Floppy device ;Diskettes or CD (TUCD) for motherboard utilities ;7VM User's Manual Item Checklist 2
  • Gigabyte GA-7VM | User Manual - Page 9
    cm x 21.1 cm Micro ATX SIZE form factor, 4 layers PCB. y AMD Athlon(K7) Slot A Processor y 512 KB 2nd cache in CPU Module y Supports 500MHz ~ 1GHz and faster Apollo KX133 ,consisting of: y VIA8371 Memory/AGP/PCI Controller(PAC) y VT82C686A PCI Super-I/O Integrated Peripheral Controller (PSIPC
  • Gigabyte GA-7VM | User Manual - Page 10
    PS/2 Connector BIOS Additional Features Summary Of Features y PS/2 Keyboard interface and PS/2 Mouse interface y Licensed AMI BIOS, 2M bit FLASH RAM y Internal/External Modem Wake up y STR (Suspend-To-RAM) y LAN Wake up y System after AC back 4
  • Gigabyte GA-7VM | User Manual - Page 11
    FDD1 JP4 7VM Motherboard 7VM Motherboard Layout PS/2 J10 USB JP5 J5 SW4 ATX POWER COM 1 CP U LP T VT8371 COM 2 DIMM 1 DIMM 2 DIMM 3 IDE 1 IDE 2 GAME & AUDIO J 8 AC97 PCI 1 PCI 2 J12 J11 JP7 PCI 3 AMR 1 AGP 1 7VM VT82C 686A J3 J4 JP6 USB2 JP9 JP8 BIO S BAT1 LED1 JP3 JP2 J6
  • Gigabyte GA-7VM | User Manual - Page 12
    7VM Motherboard Layout  Page index for CPU Speed Setup / Connectors / Panel and Jumper Page Definition CPU Speed Setup P.7 Connectors P.8 GAME & Audio Port P.8 COM 1 / COM 2 / LPT Port P.8 USB Connector P.9 PS/2 Keyboard & PS/2 Mouse Connector P.9 J10 (Power FAN) P.10 J5 (CPU FAN
  • Gigabyte GA-7VM | User Manual - Page 13
    7VM Motherboard CPU Speed Setup The system bus speed is selectable at 100 ~143MHz. The user can select the system bus speed by DIP switch SW4 . Set System Bus Speed SW4: O : ON, X : OFF 4 3 2 1 CPU PCI Spectrum X X X X 133.3 33.3 5% O X X X 100.2 33 5% X O X O 110 36.7
  • Gigabyte GA-7VM | User Manual - Page 14
    Connectors GAME & Audio Port Connectors GAME Port Line Out MIC Line In COM 1 / COM 2 / LPT Port LPT PORT COM 1 COM 2 8
  • Gigabyte GA-7VM | User Manual - Page 15
    7VM Motherboard USB Connector 5 6 78 1 23 4 Pin No. 1 2 3 4 5 6 7 8 Definition USB V0 USB D0USB D0+ GND USB V1 USB D1USB D1+ GND PS/2 Keyboard & PS/2 Mouse Connector PS/2 Mouse PS/2 Mouse/ Keyboard Pin No. Definition 1 6 5 2 4 3 3 Data NC GND 4 2 1 5 PS/2 Keyboard 6 VCC(+5V)
  • Gigabyte GA-7VM | User Manual - Page 16
    J10: Power FAN Connectors 1 Pin No. Definition 1 GND 2 +12V 3 SENSE J5: CPU FAN Pin No. Definition 1 1 GND 2 +12V 3 SENSE 10
  • Gigabyte GA-7VM | User Manual - Page 17
    7VM Motherboard J6: System FAN ATX Power 1 Pin No. Definition 1 GND 2 +12V 3 SENSE 11 1 Pin No. Definition 3,5,7,13,15-17 GND 1,2,11 3.3V 4,6,19,20 VCC 10 +12V 12 -12V 18 -5V 20 10 8 Power Good 9 5V SB stand by+5V 14 PS-ON(Soft On/Off) 11
  • Gigabyte GA-7VM | User Manual - Page 18
    Floppy Port Connectors RED LINE IDE1 (Primary) , IDE2 (Secondary) Port RED LINE IDE 1 IDE 2 12
  • Gigabyte GA-7VM | User Manual - Page 19
    7VM Motherboard USB2 : USB Port IR : Infrared Connector Pin No. Definition 8 5 1 VCC 2 USB D0− 3 USB D0+ 1 4 4 GND 5 VCC 6 USB D1− 7 USB D1+ 8 GND 1 Pin No. Definition 1 VCC (+5V) 2 NC 3 IR Data Input 4 GND 5 IR Data Output 13
  • Gigabyte GA-7VM | User Manual - Page 20
    JP3 : STR LED Connector & LED1 (DRAM LED) Connectors + LED1 (DRAM LED) 1 JP3 STR LED Connector External. J3 : Modem Wake Up (Internal Modem Card Wake Up) 1 Pin No. Definition 1 Signal 2 GND 14
  • Gigabyte GA-7VM | User Manual - Page 21
    7VM Motherboard J4 : LAN Wake Up 1 Pin No. Definition 1 +5V SB 2 GND 3 Signal J12 TEL: The connector is for Modem with internal voice connector 1 Pin No. 1 2 3 4 Definition Signal-In GND GND Signal-Out 15
  • Gigabyte GA-7VM | User Manual - Page 22
    J11:AUX_IN Connectors 1 Pin No. 1 2 3 4 Definition AUX-L GND GND AUX-R J8 : CD Audio Line In 1 Pin No. 1 2 3 4 Definition CD-L GND GND CD-R 16
  • Gigabyte GA-7VM | User Manual - Page 23
    7VM Motherboard Panel and Jumper Definition J2 : For 2X11 PINs Jumper GN HD 1 S P K 1 P−P−P+ RE 1 PW GD 1 GN (Green Switch) GD (Green LED) HD (IDE Hard Disk Active LED) SPK (Speaker Connector) RE (Reset Switch) P+P−P−(Power LED) PW (Soft Power Connector) Open: Normal Operation Close: Entering
  • Gigabyte GA-7VM | User Manual - Page 24
    JP2 : BIOS Write Protection Panel and Jumper Definition 1 Pin No. Definition ON Write Protect Enable OFF Write Protect Disable (Default) JP6 : Front Panel USB Device Wake up Selection(Optional) 1 Pin No. Definition 1-2 close FP USB Wake Up 2-3 close Normal (Default) (If you want to use
  • Gigabyte GA-7VM | User Manual - Page 25
    7VM Motherboard JP5 : Rear Panel USB Device Wake up Selection(Optional) JP4:STR Enable 1 Pin No. Definition 1-2 close RP USB Wake Up 2-3 close Normal (Default) (If you want to use "USB KB/Mouse Wake from S3" function, you have to set the BIOS setting "USB KB/Mouse Wake from S3" enabled, and
  • Gigabyte GA-7VM | User Manual - Page 26
    JP7/JP8/JP9: Onboard AC97& AMR Select (AMRÆ Audio Modem Riser) Panel and Jumper Definition 1 JP9 1 JP8 Function Jumper JP7 JP8 JP9 Onboard AC97 OFF 1-2 1-2 AMR (Primary) OFF 3-4 3-4 Onboard AC97+AMR (Secondary) ON 1-2, 3-4 1-2 JP7: AMR Primary / Secondary Select JP7 Pin No.
  • Gigabyte GA-7VM | User Manual - Page 27
    7VM Motherboard BAT1 : Battery +  Danger of explosion if battery is incorrectly replaced.  Replace only with the same or equivalent type recommended by the manufacturer.  Dispose of used batteries according to the manufacturer's instructions. 21
  • Gigabyte GA-7VM | User Manual - Page 28
    Performance List Performance List The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software
  • Gigabyte GA-7VM | User Manual - Page 29
    7VM Motherboard Block Diagram AMD-K7TM 100 MHz AGP 2X/4X System Bus 100MHz VT8371 66MHz 3.3V SDRAM 100 / 133MHz 66MHz 100 / 133MHz 33MHz 100 / 133MHz ICW W210H 3 PCI 33MHz ATA66 IDE Channels 4 USB Ports AC97 CODEC 33MHz 14.318MHz 48MHz VT82C 686A Game Port COM Ports LPT Ports IR
  • Gigabyte GA-7VM | User Manual - Page 30
    ACPI compatible. Just type" D:\Setup", the operating system will be installed as ACPI mode.』 C. After setup completes, remove the CD, and reboot your system (This manual assumes that your CD-ROM device drive letter is D:). 24
  • Gigabyte GA-7VM | User Manual - Page 31
    7VM Motherboard Step 2: (If you want to use STR Function, please set jumper JP4 (Closed.) 1 Pin No. Definition ON STR Enabled OFF STR Disabled (Default) Step 3: Power on the computer and as soon as memory counting starts, press . You will enter BIOS Setup. Select the item "POWER MANAGEMENT
  • Gigabyte GA-7VM | User Manual - Page 32
    Suspend to RAM Installation A.3 How to put your system into STR mode? There are two ways to accomplish this: 1. Choose the "Stand by" item in the "Shut Down Windows" area. A. Press the "Start" button and then select "Shut Down" B. Choose the "Stand by" item and press "OK" 26
  • Gigabyte GA-7VM | User Manual - Page 33
    7VM Motherboard 2. Define the system "power on" button to initiate STR sleep mode: A. Double click "My Computer" and then "Control Panel" B. Double click the " Power Management" item. 27
  • Gigabyte GA-7VM | User Manual - Page 34
    Suspend to RAM Installation C. Select the "Advanced" tab and "Standby" mode in Power Buttons. Step 4: Restart your computer to complete setup. Now when you want to enter STR sleep mode, just momentarily press the "Power on" button.. A.4 How to recover from the STR sleep mode? There are seven ways to
  • Gigabyte GA-7VM | User Manual - Page 35
    7VM Motherboard A.5 Notices : 1. In order for STR to function properly, several hardware and software requirements must be satisfied: A. Your ATX power supply must comply with the ATX 2.01 specification (provide more than 720 mA 5V Stand-By current). B. Your SDRAM must be PC-100 compliant. 2. Jumper
  • Gigabyte GA-7VM | User Manual - Page 36
    size can vary between sockets. Install memory in any combination table: DIMM Bank 0 Bank 1 Bank 2 168-pin SDRAM DIMM Modules Supports 8 / 16 / 32 / 64 / 128 / 256 / 512 MB Supports 8 / 16 / 32 / 64 / 128 / 256 / 512 MB Supports 8 / 16 / 32 / 64 / 128 / 256 / 512 MB X 1 pcs X 1 pcs X 1 pcs 30
  • Gigabyte GA-7VM | User Manual - Page 37
    7VM Motherboard  Page index for BIOS Setup Page The MAIN MENU P.33 Standard CMOS Features P.36 BIOS Features Setup P.39 Chipset Features Setup P.41 Power Management Setup P.44 PNP/ PCI Configuration P.47 Load BIOS Defaults P.49 Load SETUP Defaults P.50 Integrated Peripherals P.
  • Gigabyte GA-7VM | User Manual - Page 38
    BIOS Setup BIOS Setup BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS SRAM so that it retains the Setup information when the power is turned off. ENTERING SETUP
  • Gigabyte GA-7VM | User Manual - Page 39
    7VM Motherboard GETTING HELP Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections
  • Gigabyte GA-7VM | User Manual - Page 40
    • Standard CMOS Features BIOS Setup This setup page includes all the items in standard compatible BIOS. • BIOS Features Setup This setup page includes all the items of AMI special enhanced features. • Chipset Features Setup This setup page includes all the items of chipset special features. •
  • Gigabyte GA-7VM | User Manual - Page 41
    7VM Motherboard • Save & Exit Setup Save CMOS value settings to CMOS and exit setup. • Exit Without Saving Abandon all CMOS value changes and exit setup. 35
  • Gigabyte GA-7VM | User Manual - Page 42
    BIOS Setup Standard CMOS Features The items in Standard CMOS Setup Menu (Figure 2) are divided into 9 categories. Each category includes no, one or more than one setup items. Use the arrows to highlight the item and then use the or keys to select the value you want in each item.
  • Gigabyte GA-7VM | User Manual - Page 43
    identifies the types of hard disk from drive C to F that has been installed in the computer. There are two types: auto type, and manual type. Manual type is user-definable; Auto type which will automatically detect HDD type. Note that the specifications of your drive must match with the drive table
  • Gigabyte GA-7VM | User Manual - Page 44
    BIOS Setup • Memory The category is display-only which is determined by POST (Power On Self Test) of the BIOS. Base Memory The POST of the BIOS will determine the amount of base (or conventional) memory installed in the system. The value of the base memory is typically 512 K for systems with 512 K
  • Gigabyte GA-7VM | User Manual - Page 45
    7VM Motherboard BIOS Features Setup AMIBIOS SETUP - BIOS FEATURES SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved 1st Boot Device 2nd Boot Device 3rd Boot Device S.M.A.R.T. for Hard Disks BootUp Num-Lock Floppy Drive Seek Password Check Floppy IDE-0 CDROM Disabled On Disabled
  • Gigabyte GA-7VM | User Manual - Page 46
    • S.M.A.R.T. for Hard Disks Enabled Disabled Enabled HDD S.M.A.R.T. Capability. Disabled HDD S.M.A.R.T. Capability. ( Default value ) • Boot Up Num-Lock On Keypad is number keys. (Default Value) Off Keypad is arrow keys. BIOS Setup • Floppy Drive Seek During POST, BIOS will determine if
  • Gigabyte GA-7VM | User Manual - Page 47
    RAS# Drive 16 mA 8 mA 16 mA DRAM Integrity Mode AGP Mode AGP Comp. Driving Manual AGP Comp. Driving AGP Aperture Size PCI Delay Transaction ClkGen Spread Spectrum USB Controller USB Legacy Support BIOS Flash Protection DRAM Drive Strength MD Bus Strength CAS Bus Strength Memory Data Drive SDRAM
  • Gigabyte GA-7VM | User Manual - Page 48
    Set AGP Comp. Driving is Auto. (Default Value) Manual Set AGP Comp. Driving is Manual. If AGP Comp. Driving is Manual. Manual AGP Comp. Driving : 00~FF • AGP Aperture Legacy Support Keyboard/FDD KB/Mouse/FDD Disabled Set USB Legacy Support Keyboard / Floppy. Set USB Legacy Support Keyboard
  • Gigabyte GA-7VM | User Manual - Page 49
    • BIOS Flash Protection Enable Disable BIOS Flash Write Protection. Normal. (Default Value) • DRAM Drive Strength Auto Manual • MD Bus Strength Set DRAM Drive Strength Auto. Set DRAM Drive Strength Manual. High Set MD Bus Strength High. Low Set MD Bus Strength Low. • CAS Bus Strength High
  • Gigabyte GA-7VM | User Manual - Page 50
    BIOS Setup Power Management Setup AMIBIOS SETUP - POWER MANAGEMENT SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved ACPI Standby State USB Dev Wakeup From S3 Suspend Time Out(Minute) Display Activity IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ11 IRQ13 IRQ14 IRQ15 Soft-Off by Power Button
  • Gigabyte GA-7VM | User Manual - Page 51
    7VM Motherboard • Suspend Time Out (Minute) Disabled 1 2 4 8 10 20 30 40 50 60 Disabled Suspend Time Out Function. (Default Value) Enabled Suspend Time Out after 1min. Enabled Suspend Time Out after 2min. Enabled Suspend Time Out after 4min. Enabled Suspend Time Out after 8min. Enabled Suspend
  • Gigabyte GA-7VM | User Manual - Page 52
    • PME Event Wake Up BIOS Setup Disabled Enabled Disable PME Event Wake Up. Enabled PME Event Wake Up. (Default Value) • Resume On RTC Alarm You can set "Resume On RTC Alarm" item to Enabled and key in date/time to power on system. Disabled Enabled Disable this function. (Default Value) Enable
  • Gigabyte GA-7VM | User Manual - Page 53
    7VM Motherboard PnP/PCI Configuration AMIBIOS SETUP - PNP / PCI CONFIGURATION ( C ) 1999 American Megatrends, Inc. All Rights Reserved PnP OS Installed Reset Configuration Data VGA Boot from PCI AGP Palette Snoop DMA Channel 0 DMA Channel 1 DMA Channel 3 DMA Channel 5 DMA Channel 6 DMA Channel 7
  • Gigabyte GA-7VM | User Manual - Page 54
    BIOS Setup • DMA Channel( 0,1,3,5,6,7 ) ISA/ EISA PnP The resource is used by Legacy ISA device. The resource is used by PnP device. (Default Value) 48
  • Gigabyte GA-7VM | User Manual - Page 55
    7VM Motherboard Load BIOS Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.21 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER
  • Gigabyte GA-7VM | User Manual - Page 56
    Load Setup Defaults BIOS Setup AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.21 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER
  • Gigabyte GA-7VM | User Manual - Page 57
    7VM Motherboard Integrated Peripherals AMIBIOS SETUP - INTEGRATED PERIPHERALS ( C ) 1999 American Megatrends, Inc. All Rights Reserved OnBoard Serial Port A OnBoard Serial Port B Serial PortB Mode *Duplex Mode IR Pins OnBoard Parallel Port Parallel Port Mode Parallel Port DMA Parallel Port IRQ
  • Gigabyte GA-7VM | User Manual - Page 58
    2E8. Disable on Board Serial port B. • Serial Port B Mode Normal IrDA ASK IR Normal operation. (Default Value) Onboard I/O chip supports IRDA Onboard I/O chip supports ASK IR. • Duplex Mode Half Duplex N/A Full Duplex IR Function Duplex Half. Disabled this function (Default Value). IR Function
  • Gigabyte GA-7VM | User Manual - Page 59
    7VM Motherboard • Parallel Port DMA Auto Set Auto to parallel port mode DMA Channel. . (Default Value). 3 Set Parallel Port DMA is 3. 1 Set Parallel Port DMA is 1. 0 Set Parallel Port DMA is 0. • Parallel Port IRQ 7 Set Parallel Port IRQ is 7. Auto Set Auto to parallel Port IRQ DMA
  • Gigabyte GA-7VM | User Manual - Page 60
    • MPU-401 Enabled Disabled Enabled MPU-401. Disabled MPU-401. (Default Value). Ps. When Force back joystick is used, MPU-401 needs to be Enable. BIOS Setup • MUP-401 I/O Address 330h-333h 300h-303h 310h-313h 320h-323h Set MUP-401 I/O Address is 330h-333h. (Default Value). Set MUP-401 I/O
  • Gigabyte GA-7VM | User Manual - Page 61
    F7 : Load Setup Defaults Figure 10: Hardware Monitor Setup • ACPI Shutdown Temp. (This function will be effective only for the operating systems that support ACPI Function.) Disabled 60°C / 140°F 65°C / 149°F 70°C / 158°F 75°C / 167°F Normal Operation. Monitor CPU Temp. at 60°C / 140°F, if Temp
  • Gigabyte GA-7VM | User Manual - Page 62
    • CPU FAN / System FAN Speed (RPM) Detect Fan speed status automatically. • Current CPU Vcore / Vcache / Vcc3 / +12V / +5V Detect system's voltage status automatically. BIOS Setup 56
  • Gigabyte GA-7VM | User Manual - Page 63
    7VM Motherboard Set Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.21 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP
  • Gigabyte GA-7VM | User Manual - Page 64
    IDE HDD Auto Detection BIOS Setup AMIBIOS SETUP - STANDARD CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy) : Fri Mar. 25, 2000 Time (hh/mm/ss) : 10:36:24 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Pri Master : Auto Pri Slave : Auto Sec Master: Auto Sec
  • Gigabyte GA-7VM | User Manual - Page 65
    7VM Motherboard Save & Exit Setup AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.21 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER
  • Gigabyte GA-7VM | User Manual - Page 66
    Exit Without Saving BIOS Setup AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.21 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER
  • Gigabyte GA-7VM | User Manual - Page 67
    7VM Motherboard Appendix Appendix A: VIA Series VT82C686A Chipsets Driver Installation A. VIA 4 in 1 Service Pack Utility: Insert the support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the
  • Gigabyte GA-7VM | User Manual - Page 68
    Appendix 7.Click "Next". (7) 8.Click "Next". (8) 9.Click "Next". 10.Click "Finish" to Restart Computer. (9) (10) PS. This driver version doesn't support STR function, If you select "Click to enable DMA Mode" item. 62
  • Gigabyte GA-7VM | User Manual - Page 69
    7VM Motherboard B. AC97 Audio Driver : Insert the support CD that came with your motherboard into your CD-ROM driver or double -click the CD driver icon in My Computer to bring up the
  • Gigabyte GA-7VM | User Manual - Page 70
    BIOS update procedure: 9 Please check your BIOS vendor (AMI or AWARD) on the motherboard. Appendix 9 It is recommended you copy the AWDFlash.exe or AMIFlash.exe in driver CD (D:\>Utility\BIOSFlash) and the BIOS binary files into the directory you made in your hard disk.【i.e:C:\>Utility\ (C:\>
  • Gigabyte GA-7VM | User Manual - Page 71
    7VM Motherboard Appendix B: Issues To Beware Of When Installing AMR Please use inverse AMR card like the one in order to avoid mechanical problem. (See Figure A) PCI Slot Figure A: Inverse AMR Card (Default) PCI Slot Figure B: Non inverse AMR Card 65
  • Gigabyte GA-7VM | User Manual - Page 72
    Multi-Processing Universal Serial Bus Operating System Error Checking and Correcting Integrated Dual Channel Enhanced Special Circumstance Instructions Logical Block Addressing Electromagnetic Compatibility Basic Input / Output System System Management Interrupt Interrupt Request Network Interface
  • Gigabyte GA-7VM | User Manual - Page 73
    7VM Motherboard Acor. PCI RIMM DRM ISA MTH CRIMM Meaning Peripheral Component Interconnect Rambus in-line Memory Module Dual Retention Mechanism Industry Standard Architecture Memory Translator Hub Continuity RIMM 67
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73

FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device ,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection
against
harmful
interference
in
residential
installations.
This
equipment
generates,
uses,
and
can
radiate
radio
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Model Number:
Mother Board
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)
This device may not cause harmful
and
(2)
this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name:
ERIC LU
Signature:
Date:
Mar. 3, 2000
Eric Lu
GA-7VM