Gigabyte GS-R22PD1 Manual
Gigabyte GS-R22PD1 Manual
 |
View all Gigabyte GS-R22PD1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte GS-R22PD1 manual content summary:
- Gigabyte GS-R22PD1 | Manual - Page 1
GS-R22PD Four hot-pluggable systems (nodes) Dual LGA1356 socket motherboard for Intel® Xeon® series processors Service Guide Rev. 1.0 - Gigabyte GS-R22PD1 | Manual - Page 2
the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated the Quick Installation Guide included with the product. For detailed product information, carefully read the Serice Guide. For product-related - Gigabyte GS-R22PD1 | Manual - Page 3
Preface Before using this information and the product it supports, please read the following general information. 1. This Service Guide provides you with all technical information relating to the BASIC CON- FIGURATION decided for GIGABYTE's "global" product offering. To better fit local - Gigabyte GS-R22PD1 | Manual - Page 4
Table of Contents Box Contents...6 Safety, Care and Regulatory Information 7 Chapter 1 Hardware Installation 10 1-1 Installation Precautions 10 1-2 Product Specifications (Per Node 11 Chapter 2 System Hardware Installation 13 2-1 Removing Chassis Cover 14 2-2 Installing the CPU 15 2-3 - Gigabyte GS-R22PD1 | Manual - Page 5
5-2-3 Chipset Configuration 43 5-2-4 ACPI Configuration 44 5-2-5 SATA Configuration 45 5-2-6 PCI Configuration...46 5-2-7 USB Configuration 48 5-2-8 Legacy Device Configuration 49 5-2-9 Power Configuration 50 5-2-10 Console Redirection Configuration 51 5-3 Security Menu 53 5-4 System Event - Gigabyte GS-R22PD1 | Manual - Page 6
Box Contents GS-R22PD Driver CD • The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice. • The motherboard image is for reference only. - 6 - - Gigabyte GS-R22PD1 | Manual - Page 7
safely when it is used in accordance with its marked electricalratings and product usage instructions • Do not use this product near water or a heat source.* Set specified in the product's documentation. • Only authorized service technicians should repair laser devices. Precaution for Product with - Gigabyte GS-R22PD1 | Manual - Page 8
and, if not installed and used in accordance withthe instruction manual, may cause harmful interference to radio communications. Operation of causes harm to the telephone network, the Telephone Company maydiscontinue your service temporarily. If possible, they will notify in advance. But, if - Gigabyte GS-R22PD1 | Manual - Page 9
environment. This equipmentgenerate, uses, and can radiate radio frequency energy, and if not installed and used in accordancewith the instructions, may cause harmful interference to radio communication. Operation of thisequipment in a residential area is likely to cause harmful interference - Gigabyte GS-R22PD1 | Manual - Page 10
of electrostatic discharge (ESD). Prior to installation, carefully read the service guide and follow these procedures: • Prior to installation, do not remove are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician. - Gigabyte GS-R22PD1 | Manual - Page 11
Proprietary/Gen3) ŠŠ Mezzanine: ŠŠ 1 x PCI Express x8 slot, running at x8 (PCIE_2/Proprietary/Gen3) ŠŠ ASPEED AST2300 supports 128MB VRAM ŠŠ 3 x 3.5" Hot-Swap SATA/SAS HDDs ŠŠ Support for Intel IRST SATA RAID 0, RAID 1, RAID 5, RAID 10 ŠŠ 4 x 80x80x38mm 13800rpm USB Internal Connectors (Motherboard - Gigabyte GS-R22PD1 | Manual - Page 12
CPU/System temperature detection ŠŠ CPU/System fan speed detection ŠŠ CPU/System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. ŠŠ 64 Mb flash ŠŠ AMI BIOS ŠŠ Operating Temperature: 5oC to 35oC ŠŠ Non-operating - Gigabyte GS-R22PD1 | Manual - Page 13
Chapter 2 System Hardware Installation Pre-installation Instructions Perform the steps below before you open the server or before you remove or replaceany component. • Back up all important system and data files before - Gigabyte GS-R22PD1 | Manual - Page 14
Chassis Cover Before you remove or install the system cover • Make sure the system is not turned on or connected to AC power. Follow these instructions to remove the system cover: 1. Loosen and remove the screws securing the front and back cover. 2. Holding both sides of middle top cover and - Gigabyte GS-R22PD1 | Manual - Page 15
before you begin to install the CPU: • Make sure that the motherboard supports the CPU. • Always turn off the computer and unplug the power cord a flat and stable surface. • Open the system according to the instructions. WARNING! Failure to properly turn off the server before you start installing - Gigabyte GS-R22PD1 | Manual - Page 16
2-3 Installing the Heat Sink Follow these instructions to install the heat sinks: 1. Apply thermal compound evenly on the top of the CPU. 2. Remove the protective cover from the underside of the heat - Gigabyte GS-R22PD1 | Manual - Page 17
unable to insert the memory, switch the direction. 2-4-1 Dual/3 Channel Memory Configuration This motherboard provides eight DDR3 memory sockets and supports Dual/3 Channel Technology. After the memory is installed, the BIOS will automatically detect the specifications and capacity of the memory - Gigabyte GS-R22PD1 | Manual - Page 18
the power cord from the power outlet to prevent damage to the memory module. Be sure to install DDR3 DIMMs on this motherboard. Follow these instructions to install the Memory: 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down. 2. Close the plastic clip at both edges - Gigabyte GS-R22PD1 | Manual - Page 19
To install a PCI card, a riser card must be installed. Follow these instructions to PCI Expansion card: 1. Loosen the riser bracket securing screws from the side the mini card with screws. 6. Orient the PCI card with the riser guide slot and push in the direction of the arrow until the PCI card sits - Gigabyte GS-R22PD1 | Manual - Page 20
not fit back into the bay if inserted incorrectly. • Make sure that the HDD is connected to the HDD connector on the backplane. Follow these instructions to Hard disk drive: 1. Press the release button. 2. Pull the locking lever to remove the HDD tray. 3. Slide hard disk into blank. 4. Secure the - Gigabyte GS-R22PD1 | Manual - Page 21
2-7 Replacing the Motherboard Tray Follow these instructions to replace the motherboard tray: 1. Remove the chassis cover. See Removing the Chassis Cover on page 14. 2. Disconnect the power, SATA, front panel, and mainboard - Gigabyte GS-R22PD1 | Manual - Page 22
2-8 Replacing the Power Supply Follow these instructions to replace the power supply: 1. Disconnect the three power cables. 2. Pull up the power supply handle. 3. Press the retaining clip on the right side of - Gigabyte GS-R22PD1 | Manual - Page 23
Chapter 3 System Appearance 3-1 Front View 1 2 3 -B- No. Decription 1 Front Panel LEDs and buttons 2. HDD bays 3. Front Panel LEDs and buttons 3-2 Rear View 1 23 4 56 -A--B-A--B- No. Decription 1 Power module 2. VGA port 3. Full-height riser card bay 4. Serial port 5. RJ-45 LAN - Gigabyte GS-R22PD1 | Manual - Page 24
3-3 HDD and Nodes Connection -B- 1234 -A--B-A--B- 3 1 4 2 - 24 - Hardware Installation - Gigabyte GS-R22PD1 | Manual - Page 25
3-4 Front Panel LED and Buttons -B- 1 2 3 4 1 3 2 4 No. Name Color Amber Power button Green 1. and LED Green Amber 2. ID button and LED Blue N/A Amber Power button 3. and LED Green 4. ID button and LED Green Amber Blue N/A Status On Blink On Blink Blink Blink On Off On Blink On - Gigabyte GS-R22PD1 | Manual - Page 26
3-5 Rear System LEDs and Button 1 2 35 4 No. Name Power button 1. and LED 2. ID button and LED BMC Reset 3. button 4. NMI button 5. Status LED Color Green Green N/A Blue N/A Amber Green Green Amber Status Critical Event Description On N/A System has power applied to it or ACPI S0 state - Gigabyte GS-R22PD1 | Manual - Page 27
3-6 Rear System LAN LEDs 34 12 12 No. Name 1 Speed LED Color Yellow Green N/A 2. Link/ Activity LED 3 Speed LED Green N/A Green N/A 4 Link/ Activity LED Green N/A Status On Blink On Blink Off On Blink Off On Blink Off On Blink Off Description 1 Gbps data rate Identify 1 Gbps data rate - Gigabyte GS-R22PD1 | Manual - Page 28
3-7 Hard Disk Drive LEDs 1 2 LED Mode No. Non-RAID Onboard RAID 1 SAS RAID Card 2 Reserve Description Hard disk drive is not present Hard disk drive is present but not active Hard disk drive is present and active Hard disk drive is not present Hard disk drive is present but not active Hard disk - Gigabyte GS-R22PD1 | Manual - Page 29
Chapter 4 Motherboard Components 4-1 GA-7PTSV Motherboard Components 34 36 33 35 37 38 39 40 41 32 31 30 28 29 26 27 25 11 24 17 12 23 18 13 14 22 16 15 21 20 19 1 2 3 5 7 4 6 8 9 10 - 29 - Hardware Installation - Gigabyte GS-R22PD1 | Manual - Page 30
No Code 1 SSI_2X9P1 2 DDR3_P1_D0 3 DDR3_P1_D1 4 DDR3_P1_E0 5 DDR3_P1_E1 6 DDR3_P1_F0 7 DDR3_P1_F1 8 F_PANEL 9 ACK_Mode 10 CPU1 11 DDR3_P0_C1 12 DDR3_P0_C0 13 DDR3_P0_B1 14 DDR3_P0_B0 15 DDR3_P0_A1 16 DDR3_P0_A0 17 JTAG1 18 SATA_SGPIO 19 IPMB1 20 SATA0~5 21 F_USB1 22 BMC_LAN1 - Gigabyte GS-R22PD1 | Manual - Page 31
4-2 Jumper Setting 24 13 5 No. Jumper Code Jumper Setting BIOS WP 1-2 Close: Normal operation. (Default setting) 1. (BIOS Write Protect Jumper) 2-3 Close: Enable BIOS write protect function. 2. CLR_CMOS 1-2 Close: Normal operation (Default setting) (Clearing CMOS Jumper) 2-3 Close: Clear - Gigabyte GS-R22PD1 | Manual - Page 32
Setup program, press the key during the POST when the power is turned on. • BIOS flashing is potentially risky, if you do not encounter problems of using the current BIOS version, it is recommended that you don't flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS - Gigabyte GS-R22PD1 | Manual - Page 33
Main This setup page includes all the items in standard compatible BIOS. Advanced This setup page includes all the items of AMI BIOS special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters.) Security Change, set, or disable - Gigabyte GS-R22PD1 | Manual - Page 34
5-1 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press to accept or enter other sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom - Gigabyte GS-R22PD1 | Manual - Page 35
BIOS Information BIOS Version Display version number of the BIOS. BIOS Build Date Display the build date of the BIOS. BMC Information BMC Firmware Version Display version number of the frimware. System Date Set the date following the weekday-month-day- year format. System Time Set the system time - Gigabyte GS-R22PD1 | Manual - Page 36
5-2 Advanced Menu The Advanced menu display submenu options for configuring the function of various hardware components. Select a submenu item, then press Enter to access the related submenu screen. - 36 - BIOS Setup - Gigabyte GS-R22PD1 | Manual - Page 37
5-2-1 Processor Configuration BIOS Setup - 37 - - Gigabyte GS-R22PD1 | Manual - Page 38
core. Intel HT Technology Display Intel Hyper Threading Technology function support information. EMT64 Display the processor EMT64 support information. Intel VT-x Technology Display Intel Virtualization Technology function support information. Cache Information L1 Data Cache Display the information - Gigabyte GS-R22PD1 | Manual - Page 39
platform to run multiple operating systems in independent partitions. Options available: Enabled/Disabled. Default setting is Enabled. Intel EIST Support (Enhanced Intel SpeedStep Technology) Conventional Intel SpeedStep Technology switches both voltage and frequency in tandem between high and low - Gigabyte GS-R22PD1 | Manual - Page 40
limit. Options available: C0/C1/C6/C7/No Limit. Default setting is No Limit. (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. - 40 - BIOS Setup - Gigabyte GS-R22PD1 | Manual - Page 41
5-2-2 Memory Confgiuration Available Memory Total size of system memory detected during POST. Memory Type Display information of installed memory type. DIMM Group Status The size of memory installed on each of the DDR3 slots. Re-Enable all of Memory Select 'Yes' to enable all of disabled DIMMs. - Gigabyte GS-R22PD1 | Manual - Page 42
DDR Speed Determine the DDDR3 speed. Options available: Auto/Force DDR3 800/Force DDR3 1066/Force DDR3 1333/Force DDR3 1600/Force DDR3 1867. Default setting is Auto. Channel Interleaving Enable and determinememory channel interleaving. Enabled allows the system to simultaneously access different - Gigabyte GS-R22PD1 | Manual - Page 43
5-2-3 Chipset Configuration Intel VT-d Technology Enable/Disable Intel VT-d Technology function. Options available: Enabled/Disabled. Default setting is Disabled. Intel (R) I/OAT Enable/Disable Intel I/OAT Technology function. Options available: Enabled/Disabled. Default setting is Disabled. BIOS - Gigabyte GS-R22PD1 | Manual - Page 44
5-2-4 ACPI Configuration WHEA Support (Windows Hardware Error Architecture) Enable/Disable WHEA Support. Options available: Enabled/Disabled. Default setting is Enabled. - 44 - BIOS Setup - Gigabyte GS-R22PD1 | Manual - Page 45
5-2-5 SATA Configuration SATA Mode Select the on chip SATA type. IDE Mode: When set to IDE, the SATA controller disables its RAID and AHCI functions and runs in the IDE emulation mode. This is not allowed to access RAID setup utility. RAID Mode: When set to RAID, the SATA controllerenables both its - Gigabyte GS-R22PD1 | Manual - Page 46
5-2-6 PCI Configuration PCIe Slot 1/2 Switch Enable/Disable PCIe Slot 1/2. Options available: Enabled/Disabled. Default setting is Enabled. PCIe Slot 1/2 Option ROM When enabled, This setting will initialize the device expansion ROM for the related PCI-E slot. Options available: Enabled/Disabled. - Gigabyte GS-R22PD1 | Manual - Page 47
IOU3 - PCIe Port Options available: x4x4/x4x4x8/x8x4x4/x8x8/x16. Default setting is x16. Port 3A Link Speed Options available: GEN1/GEN2/GEN3. Default setting is GEN2. - 47 - BIOS Setup - Gigabyte GS-R22PD1 | Manual - Page 48
5-2-7 USB Configuration Detected USB Devices Displays the information of installed USB devices in the system. Legacy USB Support Enables or disables support for legacy USB devices. Options available: Auto/Enabled/Disabled. Default setting is Enabled. BIOS Setup - 48 - - Gigabyte GS-R22PD1 | Manual - Page 49
5-2-8 Legacy Device Configuration COM1/2 When enabled allows you to configure the serial port settings. When set to Disabled, displays no configuration for the serial ports. Options available: Enabled/Disabled. Default setting is Enabled. Device Settings Displays the Serial Port 1/2 base I/O - Gigabyte GS-R22PD1 | Manual - Page 50
5-2-9 Power Configuration Restore on AC Power Loss (Note) Defines the power state to resume to after a sys- tem shutdown that is due to an interruption in AC power. When set to Last State, the system will return to the active power state prior to shutdown. When set to Stay Off, the system remains - Gigabyte GS-R22PD1 | Manual - Page 51
5-2-10 Console Redirection Configuration - 51 - BIOS Setup - Gigabyte GS-R22PD1 | Manual - Page 52
Console Redirection (Note) Select whether to enable console redirection for specified device. Console redirection enables users to manage the system from a remote location. Options available: Disabled/COM1/ COM2 or SOL.Default setting is Disabled. Terminal Type Select a terminal type to be used for - Gigabyte GS-R22PD1 | Manual - Page 53
5-3 Security Menu The Security menu allows you to safeguard and protect the system from unauthorized use by setting up access passwords. There are two types of passwords that you can set: • Administrator Password Entering this password will allow the user to access and change all settings in the - Gigabyte GS-R22PD1 | Manual - Page 54
5-4 System Event Log Menu Erasing Settings Erase SEL Chosse options for erasing SEL. Options available: No/Yes, On next reset/Yes, On every reset. Default setting is No. - 54 - BIOS Setup - Gigabyte GS-R22PD1 | Manual - Page 55
5-5 Server Management Menu System Information Displays basic system ID information, as well as BIOS version. Press Enter to access the related submenu. BMC LAN Configuration BMC LAN Configuration. Press Enter to access the related submenu. BIOS Setup - 55 - - Gigabyte GS-R22PD1 | Manual - Page 56
5-5-1 System Information The System Management submenu is a simple display page for basic system ID information, as well as System product information. Items on this window are non-configurable. - 56 - BIOS Setup - Gigabyte GS-R22PD1 | Manual - Page 57
5-5-2 BMC LAN Configuration LAN Channel 1 Configuration Source Select to configure LAN channel parameters statically or dynamically (DHCP). Do nothing option willnot modify any BMC network parameters during BIOS phase. Options available: Static/Dynamic/Do Nothing. Default setting is Dynamic. IP - Gigabyte GS-R22PD1 | Manual - Page 58
5-6 Boot Option Menu The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the legacy drive(s) specified is not bootable. Boot Priority Order Boot Option Press Enter to configure the boot priority. By default, the server searches for - Gigabyte GS-R22PD1 | Manual - Page 59
5-7 Boot Manager The Boot manager menu allows you to specify the boot-up drive. BIOS setup will display an error message if the legacy drive(s) specified is not bootable. Boot Override UEFI: Built-in EFI Shell Press Enter to configure the device as the boot-up drive. BIOS Setup - 59 - - Gigabyte GS-R22PD1 | Manual - Page 60
5-8 Exit Menu The Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then press Enter. Save Changes and Exit Saves changes made and close the BIOS setup. Options available: Yes/No. Discard Changes and Exit Discards changes made and close the BIOS
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
 |
 |
GS-R22PD
Four hot-pluggable systems (nodes)
Dual LGA1356 socket motherboard for Intel
®
Xeon
®
series processors
Service Guide
Rev. 1.0